The NEW HB-200-X improves upon the standard HB-200 by adding three pronged punchouts that project from the back of the anchor. The prongs prevent positive wind-loads from crushing the wallboard by transferring these loads to the back of the stud.
- HB-200-X is an adjustable veneer anchor with prongs that project from the back to prevent positive wind-loads from crushing the wallboard.
- The L-shaped plate section has numerous ribs for added strength and 9/32" holes for connecting screws.
- The eyelets allow pintle insertion (1 1/4" maximum allowable eccentricity) and are sized to prevent in-and-out movement beyond allowable tolerances.
- Veneer can be adapted for Seismic applications by adding the optional H&B Seismic Hook and Continuous Wire (9 gauge or 3/16" diameter continuous wire available).
GAUGES:
AVAILABLE FINISHES:
- Hot-dipped galvanized
- Type 304 stainless steel (Type 316 optional)
DIMENSIONS:
- Pintle lengths 3", 4", 5", 6" or 7"
- Legs fabricated to accommodate up to 4" thick insulation and/or wallboard combination (state thickness when ordering)
NOTES: