170 Adjustable Truss Eye-Wire w/Seismic Hook

170 Lox-All® Truss Style Adjustable Joint Reinforcement with Eyelets for vertical adjustability and the H&B Seismic Hook for continuous wire.

H&B SH-Seismic Hook:
- This hook is “swaged” (indented) in two places to accommodate either a 9 gauge or 3/16” continuous wire
- A channel is formed that braces the continuous wire and holds it in place
- Suitable for standard 3/8” joints
- Rectangular hook/pintle acts as a vertically adjustable anchor to bond exterior masonry, while restraining in and out movement.
- Design of hook/pintle serves to mechanically secure insulation to masonry backup.
- Specify “SH” Seismic Hook with any adjustable wire, such as #170-SH
- U.S. Pat. No. 6,789,365 & 7,325,366 - Other Patents Pending
Projecting eyes are 4 point welded to the backup truss reinforcement.
Allows construction of interior wythe in advance of exterior wythe.
Fabricated in conformance with ASCE/ACI 530 building code requirements for masonry structures and ASTM A 951 (standard specification for masonry joint reinforcing).

GAUGES:

Reinforcing for interior wythe can be STANDARD WEIGHT (9 ga side rods x 9 ga cross rods), EXTRA HEAVY (3/16" side rods x 9 ga Cross Rods), or SUPER HEAVY DUTY (3/16" side rods x 3/16" cross rods)
Eyes and Pintles are 3/16" dia. standard.
Continuous wire available 9 ga. or 3/16" diameter.

AVAILABLE FINISHES:

Mill Galvanized
Hot Dip Galvanized
Stainless Steel
NOTE: H&B Recommends Stainless Steel for maximum protection against corrosion

CONSTRUCTION CONDITIONS

• SEISMIC

AVAILABLE FINISHES

• Hot Dip Galvanized
• Stainless Steel - Type 304
• Stainless Steel - Type 316

JOINT REINFORCEMENT TYPE

• TRUSS

JOINT REINFORCEMENT FEATURE

• EYE-WIRE (LOX-ALL®)

WIRE SIZE

• (S) Standard Weight Rods: 9 ga. side x 9 ga. cross
• (EH) Extra Heavy Rods: 3/16” side x 9 ga. cross
• (SHD) Super Heavy Duty: 3/16” side x 3/16” cross