All Products

For a text list of our products, visit our Product List Page. If you are having difficulty locating a product on our site, please visit our Contact Us page and let us know!


Flex-Flash® Flashing

Flex-Flash® Flashing

H&B's Flex-Flash® is a polyester scrim reinforced 40-mil thick product formulated with Elvaloy® Kee. It does not drool and combines the...
HB BELOW-GRADE 60

HB BELOW-GRADE 60

HB BELOW-GRADE 60 is a 60 mil Heavy Duty Self-Adhering Below-Grade Waterproofing Membrane, that features a woven polyethylene membrane coated on both...
HB Sealant

HB Sealant

HB SEALANT is a multi-purpose, resilient joint sealant that combines economy and high performance. It is ideal for a wide range of applications where...
HB-200-X

HB-200-X

The NEW HB-200-X improves upon the standard HB-200 by adding three pronged punchouts that project from the back of the anchor. The prongs prevent...

HB-213 Adjustable Veneer Anchor

HB-213 Adjustable Veneer Anchor

The HB-213 is an adjustable veneer anchor for metal stud and wood stud construction. The compressed leg 2X-HOOK™ has been tested and designed...
HB-213 S.I.S. Seismic Veneer Anchor

HB-213 S.I.S. Seismic Veneer Anchor

The HB-213 S.I.S. is comprised of the HB-213 Adjustable Veneer Anchor and the Seismiclip® Interlock System, which accepts continuous wire for...
HB-213 SH Seismic Veneer Anchor

HB-213 SH Seismic Veneer Anchor

The HB-213 SH is comprised of the HB-213 Adjustable Veneer Anchor and H&B's Seismic Hook, the hook is "swaged" (indented) in two places to...
HB-5213 Adjustable Veneer Anchor

HB-5213 Adjustable Veneer Anchor

HB-5213 adjustable veneer anchor designed to anchor masonry to concrete, block or brick, accommodating rigid insulation up to 6 inches (75mm) thick. ...

High Strength Veneer Anchor HB-213-HS

High Strength Veneer Anchor HB-213-HS

HB-213-HS is a High-Strength Veneer Anchor System for heavy-duty applications. It combines the HB-213 and H&B’s Heavy Duty 1/4” diameter...
HW-340 Malleable Iron Wedge Inserts

HW-340 Malleable Iron Wedge Inserts

HW-340 Malleable Iron Wedge Inserts are embedded into concrete slabs to allow for secure and adjustable attachment of materials to a concrete...
LIGHTNING-FLASH™ Wall Flashing

LIGHTNING-FLASH™ Wall Flashing

LIGHTNING-FLASH™ WALL FLASHING, made with 3M™ technology - is designed for use as a through-wall flashing and damp-proof course. Its...
Liquid-Flash™

Liquid-Flash™

Liquid-Flash is formulated using a high performance silyl-terminated polyether polymer technology (STPE). It is a single component, moisture cure...

LW-340 Malleable Iron Wedge Insert

LW-340 Malleable Iron Wedge Insert

LW-340 Long Wedge Insert is suitable for use at the bottom of the slab or when additional vertical adjustability is needed. Wedge inserts are...
MFL - Metal Flashing

MFL - Metal Flashing

MFL - Metal Flashing can be formed according to job requirements. State dimensions when ordering. Comes standard with factory formed, hemmed drip...
MGS - Mortar/Grout Screen

MGS - Mortar/Grout Screen

Mortar/Grout Screen (MGS) is a 1/4" square monofilament screen fabricated from high-strength, non-corrosive polypropylene polymers which offers the...
Mighty-Flash™ NA Residential

Mighty-Flash™ NA Residential

Mighty-Flash™ NA is an excellent for flashing pressure-treated and composite decks. Mighty-Flash™ NA, a stainless steel fabric flashing,...

Mighty-Flash™ SA Residential

Mighty-Flash™ SA Residential

Mighty-Flash™ SA is an excellent for flashing pressure-treated and composite decks. A self-adhering stainless steel fabric flashing product...
Mighty-Flash™ SA Self-Adhering SS Fabric Flashing

Mighty-Flash™ SA Self-Adhering SS Fabric Flashing

Mighty-Flash™ SA is a self-adhering stainless steel fabric flashing product with a proprietary clear adhesive. The adhesive is...
Mighty-Flash™ Stainless Steel Fabric Flashing

Mighty-Flash™ Stainless Steel Fabric Flashing

Mighty-Flash™ is a stainless steel fabric flashing, a Class A material consisting of a layer of polymeric fabric with a single sheet of 304...
MIGHTY-LOK™ HOOK

MIGHTY-LOK™ HOOK

The new Mighty-Lok™ HOOK, is a Heavy Duty 1/4” diameter compressed leg pintle that is flattened and serrated to fit a 3/8” mortar joint...

Mortar Trap™

Mortar Trap™

Mortar Trap™ is manufactured from high-density polyethylene (HDPE) strands woven into a 90% open mesh. Its unique shape breaks up mortar droppings...
Mortar Trap™ Weep Vents

Mortar Trap™ Weep Vents

A 100% recycled polyester plastic non-woven mesh vent which is treated with a flame retardant and ultra-violet inhibitors. Used in vertical joints...
Mortar Web™

Mortar Web™

Mortar Web suspends mortar droppings and redirects moisture to the exterior of the structure. Bypassing mortar collection altogether, moisture is...
MR - Masonry Reglet

MR - Masonry Reglet

The MR - Masonry Reglet, made of rigid PVC, is embedded into the mortar joint of masonry backup to accept flashing. Built-in face plate keeps mortar...

MWT - Mesh Wall Tie

MWT - Mesh Wall Tie

Mesh Wall Tie (MWT) for bonding intersecting masonry walls Conforms to ASTM A 153 (Hot-dip Galvanized) Conforms to ASTM E 437, Type 304 (Stainless...
NS - Closed Cell Neoprene Sponge

NS - Closed Cell Neoprene Sponge

NS - Closed Cell Neoprene Sponge is placed horizontally beneath relieving angle, or in the vertical expansion joint to act as a control joint Also...
Panel-Lok®

Panel-Lok®

PANEL-LOK® Mechanical Restraining Anchors for Re-Anchoring Stone Panel Veneers The Panel-Lok® panel re-anchoring system is an easy to use,...
Primer-SA Water-Based Primer for Self-Adhering Flashing

Primer-SA Water-Based Primer for Self-Adhering Flashing

Hohmann & Barnard’s Primer-SA is a water based, modified polymer primer that can be used in a variety of self adhering flashing applications....

ProWall Tools

ProWall Tools

Visit prowall.h-b.com to start using this FREE and EXCLUSIVE SOFTWARE today! The Thermal Brick Support (TBS) System is now part of ProWall Tools!...
PTA Series Anchors - PTA 310

PTA Series Anchors - PTA 310

PTA 310 Partition Top Anchors provide lateral shear resistance at the upper limit of masonry walls. They permit vertical deflection of the slab...
PTA Series Anchors - PTA 310 HS

PTA Series Anchors - PTA 310 HS

PTA 310 HS is a heavy-duty version of our PTA 310 Partition Top Anchors, developed to provide lateral shear resistance at the upper limit of masonry...
PTA Series Anchors - PTA 364

PTA Series Anchors - PTA 364

PTA 364 Partition Top Anchors have been developed to provide lateral shear resistance at the upper limit of masonry walls. They permit vertical...

PTA Series Anchors - PTA 420

PTA Series Anchors - PTA 420

The PTA 420 Partition Top Anchor has been developed to provide lateral shear resistance at the upper limit of masonry walls. They permit vertical...
PTA Series Anchors - PTA 422

PTA Series Anchors - PTA 422

PTA 422 Partition Top Anchors have been developed to provide lateral shear resistance at the upper limit of masonry walls. They permit vertical...
PTA Series Anchors - PTA RN (ROD & NUT)

PTA Series Anchors - PTA RN (ROD & NUT)

PTA RN (ROD & NUT) Partition Top Anchors have been developed to provide lateral shear resistance at the upper limit of masonry walls. They...
QV - Quadro-Vent™

QV - Quadro-Vent™

QV - Quadro-Vent's honeycomb design allows passage of moisture from cavity to the building exterior while restricting ingress of insects and other...

RB Rebar Positioners

RB Rebar Positioners

RB Rebar Positioners position two rebar in center of block, the simple Z-shaped wire bridges the cell of the block while bends rest on the shell...
RB-Twin Rebar Positioners

RB-Twin Rebar Positioners

RB-Twin Rebar Positioners have double loops to hold four rebar in the center of the block, the simple Z-shaped wire bridges the cell of block while...
RS Series - Rubber Control Joint

RS Series - Rubber Control Joint

RS Series is a Rubber Control Joint designed for masonry walls at control joints Extruded rubber material Rubber material conforms to ASTM D-2000...
Seismic Clip 300C w/HB-213

Seismic Clip 300C w/HB-213

The 300C is a seismic clip welded to a hook (pintle) and designed for use with the HB-213 adjustable veneer anchor. That features a L-shaped plate...

Seismic Hook

Seismic Hook

Hohmann & Barnard's SH-Seismic Hook: This hook is "swaged" (indented) in two places to accommodate either a 9 gauge or 3/16" continuous wire A...
Seismic Plate Pintle HB-213S w/HB-213 (T-LOK TIE™)

Seismic Plate Pintle HB-213S w/HB-213 (T-LOK TIE™)

The HB-213 w/HB-213S, formerly known as T-LOK TIE™ is an adjustable veneer anchor assembly with a heavy-duty plate pintle that features a...
Seismiclip® Interlock System (S.I.S.) - Seismic Clip

Seismiclip® Interlock System (S.I.S.) - Seismic Clip

The Seismiclip® (S.I.S.) seismic clip will accept standard H&B Wire Ties and Continuous Wire. Horizontal Joint Reinforcement Wire and Masonry...
Sharktooth Insert

Sharktooth Insert

H&B Sharktooth Insert has various applications and is capable of developing working loads up to 8,000#/ft. in both shear and tension. It is...

Slip-Set™ Stabilizer

Slip-Set™ Stabilizer

The Slip-Set™ Stabilizer bonds masonry walls and restrains lateral (shear) movements while allowing expansion and control joints to perform as...
Spira-Lok®

Spira-Lok®

Spira-Lok® is the Original Helical Wall Tie System A one-piece, flexible stainless steel wall tie for pinning masonry to new or existing walls....
SPYRA-LOX® Rebar Lap-Joint Tie

SPYRA-LOX® Rebar Lap-Joint Tie

SPYRA-LOX® Rebar Lap-Joint Tie eliminates cumbersome procedure of tying lap-joined rebars together in reinforced walls. Increases worker...
Stone Anchors

Stone Anchors

For more than 75 years, Hohmann & Barnard, Inc. has specialized in the design and manufacture of stone anchoring systems. In addition to designing...


Narrow Your Results

By Category:


By CONSTRUCTION CONDITIONS:


By BACKUP TYPE/CONDITIONS:


By AVAILABLE FINISHES:


By JOINT REINFORCEMENT TYPE:


By JOINT REINFORCEMENT FEATURE:


By WIRE SIZE:


By ANCHOR TYPE:


By ANCHOR FEATURES:


By AIR BARRIER TYPE:


By AIR BARRIER FEATURE:


By DIMENSIONS/GAUGES:


By FLASHING/DETAIL TAPE FEATURES:


By COLUMN/BEAM ANCHOR POSITION:


By COLUMN/BEAM ANCHOR FEATURES:


By COLUMN TIE WIRE DIAM: