Displaying 145 to 192 (of 198 products)
NS - Closed Cell Neoprene Sponge is placed horizontally beneath relieving angle, or in the vertical expansion joint to act as a control joint Also...
Nuflex Flashing is intended for use as a concealed waterproofing membrane on foundation walls and under concrete slabs. Material will not be...
PANEL-LOK® Mechanical Restraining Anchors for Re-Anchoring Stone Panel Veneers The Panel-Lok® panel re-anchoring system is an easy to use,...
Hohmann & Barnard’s Primer-SA is a water based, modified polymer primer that can be used in a variety of self adhering flashing applications....
Visit prowall.h-b.com to start using this FREE and EXCLUSIVE SOFTWARE today! ProWall Tools allows users to select the right products for specific...
PTA 310 Partition Top Anchors provide lateral shear resistance at the upper limit of masonry walls. They permit vertical deflection of the slab...
PTA 310 HS is a heavy-duty version of our PTA 310 Partition Top Anchors, developed to provide lateral shear resistance at the upper limit of masonry...
PTA 364 Partition Top Anchors have been developed to provide lateral shear resistance at the upper limit of masonry walls. They permit vertical...
The PTA 420 Partition Top Anchor has been developed to provide lateral shear resistance at the upper limit of masonry walls. They permit vertical...
PTA 422 Partition Top Anchors have been developed to provide lateral shear resistance at the upper limit of masonry walls. They permit vertical...
PTA RN (ROD & NUT) Partition Top Anchors have been developed to provide lateral shear resistance at the upper limit of masonry walls. They...
QV - Quadro-Vent's honeycomb design allows passage of moisture from cavity to the building exterior while restricting ingress of insects and other...
RB Rebar Positioners position two rebar in center of block, the simple Z-shaped wire bridges the cell of the block while bends rest on the shell...
RB-Twin Rebar Positioners have double loops to hold four rebar in the center of the block, the simple Z-shaped wire bridges the cell of block while...
RS Series is a Rubber Control Joint designed for masonry walls at control joints Extruded rubber material Rubber material conforms to ASTM D-2000...
The 300C is a seismic clip welded to a hook (pintle) and designed for use with the HB-213 adjustable veneer anchor. That features a L-shaped plate...
Hohmann & Barnard's SH-Seismic Hook: This hook is "swaged" (indented) in two places to accommodate either a 9 gauge or 3/16" continuous wire A...
The HB-213 w/HB-213S, formerly known as T-LOK TIE™ is an adjustable veneer anchor assembly with a heavy-duty plate pintle that features a...
The Seismiclip® (S.I.S.) seismic clip will accept standard H&B Wire Ties and Continuous Wire. Horizontal Joint Reinforcement Wire and Masonry...
H&B Sharktooth Insert has various applications and is capable of developing working loads up to 8,000#/ft. in both shear and tension. It is...
The Slip-Set™ Stabilizer bonds masonry walls and restrains lateral (shear) movements while allowing expansion and control joints to perform as...
Spira-Lok® is the Original Helical Wall Tie System A one-piece, flexible stainless steel wall tie for pinning masonry to new or existing walls....
SPYRA-LOX® Rebar Lap-Joint Tie eliminates cumbersome procedure of tying lap-joined rebars together in reinforced walls. Increases worker...
For more than 75 years, Hohmann & Barnard, Inc. has specialized in the design and manufacture of stone anchoring systems. In addition to designing...
H&B is now offering stone anchor systems that incorporate the popular 2-SEAL™ and 2-SEAL™ THERMAL WING NUT anchors. Click on anchor...
Stretch-X-Seal™ is a flexible, "stretchable", and tear resistant flashing detail tape that allows for easy installation in awkward...
Stretch-X-Seal™ is a “stretchable” flashing tape for Window Sills and Difficult Shapes often found in residential construction projects. Made...
T1 - Termination Bar is used at top of flashing to secure it to backup and is compatible with all H&B membrane and copper-laminate flashings....
T2 - Aluminum Termination Bar, which has a 1/4” flange on top for easy caulking, is used at the top of flashing to secure it to backup. Compatible...
T2 - Termination Bar, which has a 3/8” flange on top for easy caulking, is used at top of flashing to secure it to backup. Compatible with all H&B...
REDUCE THERMAL TRANSFER! The TBS Thermal Brick Support from HOHMANN & BARNARD is a groundbreaking brick veneer support system that reduces...
H&B's Textroflash™ Flashing is a thru-wall flashing/surface-mounted flashing is an excellent choice for your next residential project....
H&B's Textroflash™ Flashing a thru-wall flashing/surface-mounted flashing is a 40-mil thick composite membrane with a new, proprietary adhesive...
The THERMAL 2-SEAL™ TIE is an innovative single screw veneer tie for metal stud construction Fabricated from stainless steel and COATED with a...
The THERMAL CONCRETE 2-SEAL™ TIE features a screw with special alternating threads for use with concrete, CMU, wood stud, or brick backup....
Designed for rubble stone walls with masonry backup, and provides anchors where they are needed. The wall reinforcement has a projecting third rod....
Designed for a filled cavity condition. The backup is reinforced with a truss type reinforcement The mason places the vertical rod into the collar...
Truss Type adjustable rubble (or ashlar) stone anchor system for cavity or insulated walls. In this anchor system, the backup is reinforced with a...
Adjustable Anchor System for Rubble (Ashlar) Stone designed for concrete or metal stud backup walls. In this anchor system, the L-shaped bracket is...
Ladder Type rubble (or ashlar) stone anchoring system for cavity or insulated walls. In the Tie-HVR-295V, the backup is reinforced with a ladder type...
Top-Seal Tape™ is a self-sealing, adhesive-backed over-flange tape. Self-seals around fasteners Adhesive-backed with removable release paper...
The 500 Series Anchor, for solid backup, features 360 Brass expanders with a Type 304 St/Steel shaft and 300 St/Steel hardware TECH DATA: Hole in...
The Torq-Lok® 510 Series Anchor for hollow backup, features 360 Brass expanders with a Type 304 St/Steel shaft and 300 St/Steel hardware. TECH...
The Torq-Lok® 520 Series Anchor for stud backup, features 360 Brass expanders with Type 304 St/Steel shaft and 300 St/Steel hardware TECH DATA:...
The Torq-Lok® 530 Series Anchor for stud backup, features 360 Brass expanders with Type 304 St/Steel shaft and 300 St/Steel hardware TECH DATA:...
Vee Byna-Tie (VBT) is for use with X-SEAL or DW-10 series veneer anchors; also for use with #359 Weld-on Ties. AVAILABLE FINISHES: Hot Dip Galvanized...
VS Series - PVC Control Joint, is a complete line of polyvinyl chloride control joints suitable for various wall conditions. The PVC material...
X-Barrier™ is a sheet applied self-adhesive, membrane to provide an air and water barrier when applied to above grade wall assemblies....
Displaying 145 to 192 (of 198 products)
