Displaying 97 to 144 (of 167 products)
HB SEALANT is a multi-purpose, resilient joint sealant that combines economy and high performance. It is ideal for a wide range of applications where...
The NEW HB-200-X improves upon the standard HB-200 by adding three pronged punchouts that project from the back of the anchor. The prongs prevent...
The HB-213 is an adjustable veneer anchor for metal stud and wood stud construction. The compressed leg 2X-HOOK™ has been tested and designed...
The HB-213 S.I.S. is comprised of the HB-213 Adjustable Veneer Anchor and the Seismiclip® Interlock System, which accepts continuous wire for...
The HB-213 SH is comprised of the HB-213 Adjustable Veneer Anchor and H&B's Seismic Hook, the hook is "swaged" (indented) in two places to...
HB-5213 adjustable veneer anchor designed to anchor masonry to concrete, block or brick, accommodating rigid insulation up to 6 inches (75mm) thick. ...
HB-213-HS is a High-Strength Veneer Anchor System for heavy-duty applications. It combines the HB-213 and H&B’s Heavy Duty 1/4” diameter...
HW-340 Malleable Iron Wedge Inserts are embedded into concrete slabs to allow for secure and adjustable attachment of materials to a concrete...
LIGHTNING-FLASH™ WALL FLASHING, made with 3M™ technology - is designed for use as a through-wall flashing and damp-proof course. Its...
Liquid-Flash is formulated using a high performance silyl-terminated polyether polymer technology (STPE). It is a single component, moisture cure...
LW-340 Long Wedge Insert is suitable for use at the bottom of the slab or when additional vertical adjustability is needed. Wedge inserts are...
MFL - Metal Flashing can be formed according to job requirements. State dimensions when ordering. Comes standard with factory formed, hemmed drip...
Mortar/Grout Screen (MGS) is a 1/4" square monofilament screen fabricated from high-strength, non-corrosive polypropylene polymers which offers the...
Mighty-Flash™ NA is an excellent for flashing pressure-treated and composite decks. Mighty-Flash™ NA, a stainless steel fabric flashing,...
Mighty-Flash™ SA is an excellent for flashing pressure-treated and composite decks. A self-adhering stainless steel fabric flashing product...
Mighty-Flash™ SA is a self-adhering stainless steel fabric flashing product with a proprietary clear adhesive. The adhesive is...
Mighty-Flash™ is a stainless steel fabric flashing, a Class A material consisting of a layer of polymeric fabric with a single sheet of 304...
The new Mighty-Lok™ HOOK, is a Heavy Duty 1/4” diameter compressed leg pintle that is flattened and serrated to fit a 3/8” mortar joint...
Mortar Trap™ is a mortar collection device manufactured from high-quality polypropylene strands woven into a 90% open mesh. When used with properly...
A 100% recycled polyester plastic non-woven mesh vent which is treated with a flame retardant and ultra-violet inhibitors. Used in vertical joints...
The MR - Masonry Reglet, made of rigid PVC, is embedded into the mortar joint of masonry backup to accept flashing. Built-in face plate keeps mortar...
Mesh Wall Tie (MWT) for bonding intersecting masonry walls Conforms to ASTM A 153 (Hot-dip Galvanized) Conforms to ASTM E 437, Type 304 (Stainless...
NS - Closed Cell Neoprene Sponge is placed horizontally beneath relieving angle, or in the vertical expansion joint to act as a control joint Also...
PANEL-LOK® Mechanical Restraining Anchors for Re-Anchoring Stone Panel Veneers The Panel-Lok® panel re-anchoring system is an easy to use,...
Hohmann & Barnard’s Primer-SA is a water based, modified polymer primer that can be used in a variety of self adhering flashing applications....
Visit prowall.h-b.com to start using this FREE and EXCLUSIVE SOFTWARE today! The Thermal Brick Support (TBS) System is now part of ProWall Tools!...
PTA 310 Partition Top Anchors provide lateral shear resistance at the upper limit of masonry walls. They permit vertical deflection of the slab...
PTA 310 HS is a heavy-duty version of our PTA 310 Partition Top Anchors, developed to provide lateral shear resistance at the upper limit of masonry...
PTA 364 Partition Top Anchors have been developed to provide lateral shear resistance at the upper limit of masonry walls. They permit vertical...
The PTA 420 Partition Top Anchor has been developed to provide lateral shear resistance at the upper limit of masonry walls. They permit vertical...
PTA 422 Partition Top Anchors have been developed to provide lateral shear resistance at the upper limit of masonry walls. They permit vertical...
PTA RN (ROD & NUT) Partition Top Anchors have been developed to provide lateral shear resistance at the upper limit of masonry walls. They...
QV - Quadro-Vent's honeycomb design allows passage of moisture from cavity to the building exterior while restricting ingress of insects and other...
RB Rebar Positioners position two rebar in center of block, the simple Z-shaped wire bridges the cell of the block while bends rest on the shell...
RB-Twin Rebar Positioners have double loops to hold four rebar in the center of the block, the simple Z-shaped wire bridges the cell of block while...
RS Series is a Rubber Control Joint designed for masonry walls at control joints Extruded rubber material Rubber material conforms to ASTM D-2000...
The 300C is a seismic clip welded to a hook (pintle) and designed for use with the HB-213 adjustable veneer anchor. That features a L-shaped plate...
Hohmann & Barnard's SH-Seismic Hook: This hook is "swaged" (indented) in two places to accommodate either a 9 gauge or 3/16" continuous wire A...
The HB-213 w/HB-213S, formerly known as T-LOK TIE™ is an adjustable veneer anchor assembly with a heavy-duty plate pintle that features a...
The Seismiclip® (S.I.S.) seismic clip will accept standard H&B Wire Ties and Continuous Wire. Horizontal Joint Reinforcement Wire and Masonry...
H&B Sharktooth Insert has various applications and is capable of developing working loads up to 8,000#/ft. in both shear and tension. It is...
The Slip-Set™ Stabilizer bonds masonry walls and restrains lateral (shear) movements while allowing expansion and control joints to perform as...
Spira-Lok® is the Original Helical Wall Tie System A one-piece, flexible stainless steel wall tie for pinning masonry to new or existing walls....
SPYRA-LOX® Rebar Lap-Joint Tie eliminates cumbersome procedure of tying lap-joined rebars together in reinforced walls. Increases worker...
For more than 75 years, Hohmann & Barnard, Inc. has specialized in the design and manufacture of stone anchoring systems. In addition to designing...
H&B is now offering stone anchor systems that incorporate the popular 2-SEAL™ and 2-SEAL™ THERMAL WING NUT anchors. Click on anchor...
T1 - Termination Bar is used at top of flashing to secure it to backup and is compatible with all H&B membrane and copper/stainless steel composite...
T2 - Aluminum Termination Bar, which has a 1/4” flange on top for easy caulking, is used at the top of flashing to secure it to backup. Compatible...
Displaying 97 to 144 (of 167 products)
