Displaying 49 to 96 (of 169 products)
The 353L - Column Anchor anchors masonry to the building frame while restraining both positive and negative wind load actions, it has a slotted hole...
The 354 - Notched Column Anchor (Corrugated Type) is for anchoring masonry to structural columns when masonry is parallel to the column flange...
The 355 Column Anchor is for anchoring masonry to structural columns when masonry is parallel to the column flange DIMENSIONS/GAUGES: 1/4" thick x 1...
The 355L - Column Anchor anchors masonry to the building frame while restraining both positive and negative wind load actions, it has a slotted hole...
The 356 Column Anchor is for anchoring masonry to structural column when masonry is parallel to column web The 356L has a slotted hole to accept...
The 356L Column Anchor is for anchoring masonry to structural columns when masonry is parallel to the column web The 356L has a slotted hole to...
The 357 - Beam Anchor is for anchoring masonry to structural beams DIMENSIONS/GAUGES: Standard size is 1 1/4" wide x 12 ga. thick x 12" long ...
359 Weld-on Ties are used in conjunction with the Vee-Byna Tie® or the 301W Column Web Tie The systems anchor masonry to the structural frame,...
359-C - Weld-on Ties are used in conjunction with the Vee-Byna Tie® or the 301W Column Web Tie The systems anchor masonry to the structural...
359-FH - Weld-on Ties are used in conjunction with the Vee-Byna Tie® or the 302W Column Web Tie The systems anchor masonry to the structural...
359FP - Weld-On Ties are for use when there is a requirement for spray-on fireproofing Exaggerated offset dimension 'L' (specify when ordering)...
359FP-C - Weld-on Ties are for use when there is a requirement for spray-on fireproofing Exaggerated offset dimension 'L' (specify when ordering)...
The 360 Gripstay™ Channel Slot is welded onto steel web or flange and accepts any type of Gripstay Anchor DIMENSIONS/GAUGES: 7-1/2" long...
The 362 - Gripstay™ Channel Slot is furnished with integrally formed end tabs for attachment to masonry. Accepts any Gripstay™ Anchor for...
The 362-C - Gripstay™ Channel Slot is a continuous Gripstay™ channel and accepts any Gripstay™ Anchor for masonry or stone...
The 362-CX Gripstay™ Channel is for use on backup block with insulation. Factory-welded prongs bridge the insulation and abut the concrete...
The 363 - Flexible Gripstay™ Channel Anchor Head permits horizontal and vertical movement of the masonry wall while restraining the wall from...
The 363-BL is comprised of a Byna-Lok™ Wire Tie fitted with a 363 Gripstay™ head to fit any style Gripstay™ Channel Slot. The...
The 363-BT is comprised of a Vee Byna- Tie® fitted with a Gripstay head to fit any style Gripstay Channel. (360, 361, 362, 362-C, 362-CX) 363-BT...
364 SV - Seismic-Notch Gripstay™ Channel Slot Anchor is modified to comply with seismic codes, which call for continuous wire in the veneer to...
The 365 Bent Gripstay™ Channel Slot anchor ties masonry to steel columns, concrete or existing walls The 365 has standard 1" bend. Longer...
STANDARD SIZES: Pintle Section TIE NO. SIZE 300H 3” 400H 4” 475H 4-3/4” 525H 5-1/4” Eye Section TIE NO....
Adjusto-Tie™ an innovative single screw veneer tie for metal stud construction with a factory-installed EPDM washer to secure rigid insulation...
The beveled head of the askew head bolt engages the internal wedge shape of H&B concrete inserts (LW-340 or HW-340) and produces an automatic...
Standard Backer Rod is an ideal non-absorbent compressible backup material inserted into a joint to control sealant depth, create a backstop to allow...
BL-407 is a wire tie and plate combination system that provides adjustability, strength, stiffness, positive connection, corrosion resistance, and is...
The BL-523 Brass Expansion Bolt is for fastening anchors to concrete, block, brick and into mortar joints. TECH DATA: Internal Bolt: Type 304 ...
New masonry veneer can be anchored to studs, existing masonry, concrete or steel with the Byna-Lok Wire Tie. Various H&B Anchor systems can be fitted...
Style "CA" brick vents features: Cast Aluminum Mill Finish* Rear waterstop Load-bearing One piece molded unit Overlapping blades Continuous...
The Channel-Tee Seismic-Notch Anchor System is ideal for use where maximum vertical adjustability is preferred. The Continuous Channel is surface...
New! Designed and engineered concealed lintel systems for brickwork Architects can feel free to incorporate this classic look into prestigious...
The use of a continuous wire in masonry veneer walls is beneficial in providing additional protection against problems arising from thermal expansion...
COPPER GUARD™ is a permanent premium quality rolled or sheet copper flashing for any trim work required. Excellent for forming valleys, drip...
Copper-Fabric™ NA Copper Fabric Flashing is a composite membrane consisting of a polyethylene film laminated to BOTH sides of a 3, 5, or 7 oz....
SA Self-Adhering Copper Fabric Flashing is a composite membrane consisting of a polyethylene film laminated to a 3, 5, or 7 oz. copper sheet to...
Hohmann & Barnard's Soldered Copper End Dams, Inside Corners and Outside Corners are for use with H&B specified flashings for protection...
Soldered Stainless Steel End Dam, Inside Corner and Outside Corner for use with H&B specified flashings for protection against moisture...
CR - Concrete Reglet, made of rigid PVC, attaches easily to form for poured concrete conditions; with a built-in face plate that keeps mortar out,...
The Corrugated Wall Tie is for anchoring wood stud to masonry. This product is only recommended for use in residential construction. GAUGES:...
Drip Plates (Drip Edge) DP Our Standard Drip Plate, furnished with a smooth, factory-formed hemmed edge for installation safety and uniform...
The DW-10HS® with Byna-Lok® is a seismic veneer anchoring system comprised of the high strength brick veneer anchor, DW-10HS®, combined with the...
The DW-10HS® Seismiclip® Interlock System is a seismic veneer anchoring system comprised of a high strength brick veneer anchor, DW-10HS™,...
DW-10HS® is for anchoring brick veneer to metal stud, masonry, concrete or wood backup. (We carry a wide variety of screws for various types of...
ENVIRO-BARRIER™ is a single component, fluid applied, elastomeric membrane to provide an air, water and vapor barrier when applied to above...
ENVIRO-BARRIER™ SILICONE is a silicone air and water-resistive barrier (AWB) that has a 100% silicone coating that is solvent-free,...
The reformulated ENVIRO-BARRIER™ VP is a single component, fluid applied, vapor permeable air and water barrier for above grade wall...
H&B's Flex-Flash® is a polyester scrim reinforced 40-mil thick product formulated with Elvaloy® Kee. It does not drool and combines the...
HB BELOW-GRADE 60 is a 60 mil Heavy Duty Self-Adhering Below-Grade Waterproofing Membrane, that features a woven polyethylene membrane coated on both...
Displaying 49 to 96 (of 169 products)
