Tie-HVR-295V Anchor System - Ladder Type


DOCUMENTS & DOWNLOADS

Submittal Sheets

Try the new ProWall Tool and generate submittal packages 10 TIMES faster!

Safety Data Sheets (SDS)

LEED

Due to unprecedented supply chain disruptions we are providing LEED details on an ad hoc basis. Please contact your local H&B Representative for LEED information.

CAD

Register or login to access CAD files.
pdf

Ladder Type rubble (or ashlar) stone anchoring system for cavity or insulated walls.

  • In the Tie-HVR-295V, the backup is reinforced with a ladder type reinforcement with projecting boxes and a factory-welded restraint bar
  • The mason then places the vertical rod into the projecting boxes as shown (after inserting it into the hole of the flexible wire tie)
  • Rubble stone can then be tied easily to the backup using these flexible ties wherever the veneer mortar joint may lie.
  • Ideal for when horizontal mortar joints do not align, and a large amount of vertical adjustability is required.
  • Tie-HVR-295V Anchor System - Ladder Type

DIMENSIONS/GAUGES:

  • Backup Ladder available with any combination of 9 ga. or 3/16" dia. Side and Cross Rods.
  • Vertical Hook is 5/16" or 3/8" diameter. Specify when ordering. (Engineering calculations available upon request.)
  • Vee Ties are standard 3/16" dia. x length to suit.

AVAILABLE FINISHES:

  • Hot Dip Galvanized
  • Stainless Steel

NOTES:

CONSTRUCTION CONDITIONS


• STANDARD

BACKUP TYPE/CONDITIONS


• Cavity/Insulated CMU Backup
• CMU/Masonry Backup

AVAILABLE FINISHES


• Hot Dip Galvanized
• Stainless Steel - Type 304
• Stainless Steel - Type 316

JOINT REINFORCEMENT TYPE


• LADDER

DIMENSIONS/GAUGES


• Flexible Wire Ties Standard 3/16" Ø x length to suit
• Vertical J-Hook 3/8”Ø, 7/16”Ø, or 1/2”Ø