Tie-HVR-195V Anchor System

Tie-HVR-195V Anchor System - Truss Type

Truss Type adjustable rubble (or ashlar) stone anchor system for cavity or insulated walls.

In this anchor system, the backup is reinforced with a truss type reinforcement with projecting boxes and a factory-welded restraint bar
The mason places the vertical rod into the projecting boxes as shown (after inserting it into the hole of the flexible wire tie)
Rubble stone can then be tied easily to the backup using these flexible ties wherever the veneer mortar joint may lie.
Ideal for when horizontal mortar joints do not align, and a large amount of vertical adjustability is required.
Tie-HVR-195V Anchor System - Truss Type

DIMENSIONS/GAUGES:

Backup Truss available with any combination of 9 ga. or 3/16" dia. Side and Cross Rods
Vertical Hook is available in 5/16" or 3/8" diameter. Specify when ordering. (Engineering calculations available on request.)
Flexible Wire Ties are standard 3/16" dia. x length to suit

AVAILABLE FINISHES:

Hot Dip Galvanized
Stainless Steel

NOTES:

System shown with insulation/cavity condition. For other options/applications, see Tie-HVR-190 Anchor System (or Tie-HVR-295V Ladder Type) or contact an H&B Technical Representative.
U.S. Patent No. 8,375,667

BACKUP TYPE/CONDITIONS

• Cavity/Insulated CMU Backup
• CMU/Masonry Backup

AVAILABLE FINISHES

• Hot Dip Galvanized
• Stainless Steel - Type 304
• Stainless Steel - Type 316

JOINT REINFORCEMENT TYPE

• TRUSS

WIRE SIZE

• (S) Standard Weight Rods: 9 ga. side x 9 ga. cross
• (EH) Extra Heavy Rods: 3/16” side x 9 ga. cross
• (SHD) Super Heavy Duty: 3/16” side x 3/16” cross