X-SEAL® Anchor


DOCUMENTS & DOWNLOADS

Submittal Sheets

Try the new ProWall Tool and generate submittal packages 10 TIMES faster!

Safety Data Sheets (SDS)

LEED

Due to unprecedented supply chain disruptions we are providing LEED details on an ad hoc basis. Please contact your local H&B Representative for LEED information.

CAD

Register or login to access CAD files.
pdf

The X-SEAL® Anchor meets or exceeds requirements of the Commonwealth of Massachusetts State Building Code for air leakage and water penetration

  • The X-SEAL® Veneer Anchor is packed with more features than any other anchor on the market. Owners, architects and masons can be confident in the performance of an "X-SEALED" metal stud / veneer wall. The X-SEAL® Anchor is the next generation veneer anchor from H&B. The original DW-10-X® Anchor was developed to address the problem of possible long-term deterioration of the insulation or wallboard. The pronged legs bridge the sheathing and abut the steel stud, affording independent, positive anchorage. Compression of the sheathing by positive loads is also prevented
  • The X-SEAL® Anchor improves upon the DW-10-X by moving the horizontal pronged legs in from each end, enabling the backplate portion of the anchor to effectively seal the wallboard /insulation. This helps to maintain the integrity of the vapor barrier and prevents the ingress of air and moisture through the sheathing
  • The pronged legs are now also rib-stiffened and oriented closer to each other than on the original DW-10-X, thus enhancing the compressive strength BY OVER 20%!

AVAILABLE FINISHES:

  • Hot Dip Galvanized
  • Type 304 Stainless Steel

DIMENSIONS:

  • Available in leg lengths from ½” – 4-1/2” (combination of wallboard and or insulation)

NOTE:

  • X-SEAL® Tape is available for additional protection against air and moisture infiltration

CONSTRUCTION CONDITIONS


• STANDARD

BACKUP TYPE/CONDITIONS


• Metal Stud Backup

AVAILABLE FINISHES


• Hot Dip Galvanized
• Stainless Steel - Type 304

ANCHOR TYPE


• WIRE TIE & PLATE

ANCHOR FEATURES


• Vertical Adjustability
• Prevents Damage to Sheathing
• Prevents Damage to Insulation