PTA Series Anchors - PTA RN (ROD & NUT)


DOCUMENTS & DOWNLOADS

Submittal Sheets

Try the new ProWall Tool and generate submittal packages 10 TIMES faster!

Safety Data Sheets (SDS)

LEED

Due to unprecedented supply chain disruptions we are providing LEED details on an ad hoc basis. Please contact your local H&B Representative for LEED information.

CAD

Register or login to access CAD files.
pdf

PTA RN (ROD & NUT) Partition Top Anchors have been developed to provide lateral shear resistance at the upper limit of masonry walls.

  • They permit vertical deflection of the slab above, without transferring compressive loads to the masonry wall below.
  • Must be used in conjunction with 305 Dovetail Slot.
  • PTA Tube with expansion filler is placed over rod anchor, which has been attached to concrete in the method illustrated. The vertical joint is then filled with mortar, fully surrounding tube.
  • PTA Series Anchorsare suitable for construction using steel or concrete.

GAUGES:

  • Rounds are 3/8" diameter

AVAILABLE FINISHES:

  • PTA-RN Anchors are available in Mill Galvanized only

NOTE:

  • Important: We are not responsible for incompatibility if ties or slots are interchanged with those of other manufacturers
  • Special high-load designs can be manufactured on a special order basis, contact our technical department for information