LW-340 Malleable Iron Wedge Insert

LW-340 Long Wedge Insert is suitable for use at the bottom of the slab or when additional vertical adjustability is needed.

Wedge inserts are embedded into concrete slabs.
Nail holes in the back of the insert allow easy nailing to forms.
When the forms are stripped, the open face of the insert is flush with the concrete.
The beveled head of the askew head bolt engages the internal wedge shape of the insert and produces an automatic tightening action when a load is placed on it.

AVAILABLE FINISHES:

Available Hot Dip Galvanized.

PERFORMANCE DATA:

	Shear	Tension	Concrete Strength	Torque
LW-340	17,305 lbs.	17,367 lbs.	4,125 psi	150 ft./lbs.

All values listed are ultimate capacities in pounds which should be reduced by a minimum safety factor of three to determine the allowable working loads.

ACCESSORY PRODUCT:

Askew Head Bolt

3/4” dia. x 2”, 2-1/2”, 3” or 4” long.
Available Plain, Stainless Steel or Zinc Plated. Hot Galv available on special order.
Askew Head Bolt Performance Data:Carbon Steel

Carbon Steel 60,000 psi minimum Tensile Strength

Stainless Steel 70,000 psi minimum Tensile Strength