PTA Series Anchors - PTA 422


PTA 422 Partition Top Anchors have been developed to provide lateral shear resistance at the upper limit of masonry walls.

  • They permit vertical deflection of the slab above, without transferring compressive loads to the masonry wall below.
  • PTA Tube is not required with the PTA-422. H&B's NS Neoprene Sponge placed between the concrete block and the PTA-422 allows vertical expansion and contraction.
  • PTA Series Anchorsare suitable for construction using steel or concrete.


  • 12 ga. thick
  • Available for 4”-12” block
  • Holes 7/16" dia.


  • Mill Galvanized
  • Hot Dip Galvanized
  • Stainless Steel


  • Special high-load designs can be manufactured on a special order basis contact our technical department for information.