TIE-HVR-195V TRUSS - RUBBLE STONE ANCHOR SYSTEM

Truss Type adjustable rubble (or ashlar) stone anchor system for cavity or insulated walls.

• In this anchor system, the backup is reinforced with a truss type reinforcement with projecting boxes and a factory-welded restraint bar
• The mason places the vertical rod into the projecting boxes as shown (after inserting it into the hole of the flexible wire tie)
• Rubble stone can then be tied easily to the backup using these flexible ties wherever the veneer mortar joint may lie.
• Ideal for when horizontal mortar joints do not align, and a large amount of vertical adjustability is required.
• Tie-HVR-195V Anchor System - Truss Type

DIMENSIONS/GAUGES:

• Backup Truss available with any combination of 9 ga. or 3/16" dia. Side and Cross Rods
• Vertical Hook is available in 5/16" or 3/8" diameter. Specify when ordering. (Engineering calculations available on request.)
• Flexible Wire Ties are standard 3/16" dia. x length to suit

AVAILABLE FINISHES:

• Hot Dip Galvanized
• Stainless Steel

NOTES:

• System shown with insulation/cavity condition. For other options/applications, see Tie-HVR-190 Anchor System (or Tie-HVR-295V Ladder Type) or contact an H&B Technical Representative.
• U.S. Patent No. 8,375,667