HB-200-X VENEER ANCHOR

The HB-200-X improves upon the standard HB-213 by adding three pronged punch-outs that project from the back of the anchor. The prongs prevent positive wind-loads from crushing the wallboard by transferring these loads to the back of the stud.

• HB-200-X is an adjustable veneer anchor with prongs that project from the back to prevent positive wind-loads from crushing the wallboard.
• The L-shaped plate section has numerous ribs for added strength and 9/32" holes for connecting screws.
• The eyelets allow pintle insertion (1 1/4" maximum allowable eccentricity) and are sized to prevent in-and-out movement beyond allowable tolerances.
• Veneer can be adapted for Seismic applications by adding the optional H&B Seismic Hook and Continuous Wire (9 gauge or 3/16" diameter continuous wire available).

GAUGES:

• 14 ga. or 12 ga. thick

AVAILABLE FINISHES:

• Hot-Dip Galvanized
• Type 304 Stainless Steel
• Type 316 Stainless Steel

DIMENSIONS:

• Pintle lengths 3", 4", 5", 6" or 7"
• Legs fabricated to accommodate up to 4" thick insulation and/or wallboard combination (state thickness when ordering)

NOTES:

• Available with optional Seismiclip® Interlock System(S.I.S.) and Continuous Wire
• Standard HB-200 information.