270-2X LADDER EYE-WIRE REINFORCEMENT

270-2X Ladder Eye-Wire is a ladder style adjustable joint reinforcement with eyes and the NEW 2X-Hook.

The compressed leg 2X-HOOK™ has been tested and designed to withstand over 200-lbf, in tension or compression, at maximum allowed offset (ACI 530 6.2.2.5.5.4) of 1-1/4” (disengagement of the pintle from the veneer anchor). These results exceed BIA recommendations and the capabilities of standard “round wire” hooks or pintles by over 100%!

• NOTE: 2X-HOOK™ CAN BE INSTALLED WITH LEGS POINTING UP OR DOWN.
• The embedded portion of the 2X-Hook is 3/16”DIA round wire, satisfying the code requirement that the mortar bed thickness (typically 3/8”) must be twice the diameter of the wire.
• 2X-Hook: U.S. Pat. No. 8,613,175 Test results available upon request.

Benefits:

• Allows construction of interior wythe in advance of exterior wythe
• 2X-Hook acts as a vertically adjustable anchor to bond exterior masonry, while restraining in and out movement
• Design of 2X-Hook serves to mechanically secure insulation to masonry backup
• Fabricated in conformance with ASCE/ACI 530 building code requirements for masonry structures and ASTM A 951 (standard specification for masonry joint reinforcing)

GAUGES:

• Reinforcing for interior wythe can be STANDARD WEIGHT (9 ga x 9 ga), EXTRA HEAVY (3/16" side rods x 9 ga cross rods), or SUPER HEAVY DUTY (all 3/16")
• Eyes and 2X-HOOK™ are 3/16" dia. standard

AVAILABLE FINISHES:

• Hot Dip Galvanized
• Type 304 Stainless Steel
• Type 316 Stainless Steel

PACKING DIMENSIONS:

• Packed 500' per bundle (50 pcs - 10' long)