Displaying 1 to 22 (of 22 products)
For anchoring masonry to concrete with #305 Dovetail Slot AVAILABLE FINISHES: Hot Dip Galvanized Stainless Steel DIMENSIONS: Thickness: 16 Gauge,...
303 SV - Seismic-Notch Dovetail Anchor is modified to comply with seismic codes, which call for continuous wire in the veneer to be an integral...
For anchoring masonry to concrete with dovetail ties (eg. 303-SV Seismic-Notch Dovetail Anchor.) GAUGES: #305 Slot available in 22 or 16 ga....
For use with #305 Dovetail Slot or anchored directly to backup (NOTE:structural adequacy must be verified by project engineer before surface...
The 315-BL Byna-Lok is fitted with a dovetail head to fit 305 Dovetail Slot. New masonry veneer is anchored to studs, existing masonry, concrete or...
The 315-BT is fitted with a Vee Byna- Tie®for use with the Seismiclip® Interlock System. For use with 305 Dovetail Slot. Horizontal joint...
The 344 - Rigid Partition Anchor is for anchoring load bearing walls at intersections AVAILABLE FINISHES: Plain Steel Hot Dip Galv. Stainless Steel ...
The 345-BT Flexible Tie is for tying masonry to concrete or CMU backup with a flexible (not rigid) connection. Comprised of a Vee Byna-Tie® with a...
The 360 Gripstay™ Channel Slot is welded onto steel web or flange and accepts any type of Gripstay Anchor DIMENSIONS/GAUGES: 7-1/2" long...
The 362 - Gripstay™ Channel Slot is furnished with integrally formed end tabs for attachment to masonry. Accepts any Gripstay™ Anchor for...
The 362-C - Gripstay™ Channel Slot is a continuous Gripstay™ channel and accepts any Gripstay™ Anchor for masonry or stone...
The 362-CX Gripstay™ Channel is for use on backup block with insulation. Factory-welded prongs bridge the insulation and abut the concrete...
The 363 - Flexible Gripstay™ Channel Anchor Head permits horizontal and vertical movement of the masonry wall while restraining the wall from...
The 363-BL is comprised of a Byna-Lok™ Wire Tie fitted with a 363 Gripstay™ head to fit any style Gripstay™ Channel Slot. The...
The 363-BT is comprised of a Vee Byna- Tie® fitted with a Gripstay head to fit any style Gripstay Channel. (360, 361, 362, 362-C, 362-CX) 363-BT...
364 SV - Seismic-Notch Gripstay™ Channel Slot Anchor is modified to comply with seismic codes, which call for continuous wire in the veneer to...
The 365 Bent Gripstay™ Channel Slot anchor ties masonry to steel columns, concrete or existing walls The 365 has standard 1" bend. Longer...
STANDARD SIZES: Pintle Section TIE NO. SIZE 300H 3” 400H 4” 475H 4-3/4” 525H 5-1/4” Eye Section TIE NO....
The Corrugated Wall Tie is for anchoring wood stud to masonry. This product is only recommended for use in residential construction. GAUGES:...
Mesh Wall Tie (MWT) for bonding intersecting masonry walls Conforms to ASTM A 153 (Hot-dip Galvanized) Conforms to ASTM E 437, Type 304 (Stainless...
The Slip-Set™ Stabilizer bonds masonry walls and restrains lateral (shear) movements while allowing expansion and control joints to perform as...
Vee Byna-Tie (VBT) is for use with X-SEAL or DW-10 series veneer anchors; also for use with #359 Weld-on Ties. AVAILABLE FINISHES: Hot Dip Galvanized...
Displaying 1 to 22 (of 22 products)
