Displaying 1 to 26 (of 26 products)

H&B Copper Termite Shield is a sheet of soft-tempered copper that is permanently coated on one side with a polyethylene membrane. Compatible with...

Copper-Fabric™ NA Copper Fabric Flashing is a composite membrane consisting of a polyethylene film laminated to BOTH sides of a 3, 5, or 7 oz....

SA Self-Adhering Copper Fabric Flashing is a composite membrane consisting of a polyethylene film laminated to a 3, 5, or 7 oz. copper sheet to...

Hohmann & Barnard's Soldered Copper End Dams, Inside Corners and Outside Corners are for use with H&B specified flashings for protection...

Soldered Stainless Steel End Dam, Inside Corner and Outside Corner for use with H&B specified flashings for protection against moisture...

CR - Concrete Reglet, made of rigid PVC, attaches easily to form for poured concrete conditions; with a built-in face plate that keeps mortar out,...

Drip Plates (Drip Edge) DP Our Standard Drip Plate, furnished with a smooth, factory-formed hemmed edge for installation safety and uniform...

Hohmann & Barnard's popular ENVIRO-BARRIER™ AVB System is about to add two new formulations, an AVB for virtually every condition! Download...

EPRA-MAX™ EPDM Thru-Wall Flashing remains flexible to -49° F and is not susceptible to decomposition due to UV exposure, making it an excellent...

H&B's Flex-Flash® is a polyester scrim reinforced 40-mil thick product formulated with Elvaloy® Kee. It does not drool and combines the...

HB SEALANT is a multi-purpose, resilient joint sealant that combines economy and high performance. It is ideal for a wide range of applications where...

Liquid-Flash is formulated using a high performance silyl-terminated polyether polymer technology (STPE). It is a single component, moisture cure...

Sandell Trowel Mastic is a cut-back asphalt, containing long-fibered material, manufactured in proper consistency for easy application. Sandell...

MFL - Metal Flashing can be formed according to job requirements. State dimensions when ordering. Comes standard with factory formed, hemmed drip...

Sawtooth Metal Flashing (STF) acts to bond in all directions. Can be manufactured for parapet/coping applications, or bent for relief angle...

Mite-Out™ Copper Termite Shield with Sill-Seal is a sheet of soft-tempered copper that is permanently coated on one side with a polyethylene...

The MR - Masonry Reglet, made of rigid PVC, is embedded into the mortar joint of masonry backup to accept flashing. Built-in face plate keeps mortar...

Hohmann & Barnard’s Primer-SA is a water based, modified polymer primer that can be used in a variety of self adhering flashing applications....

Stretch-X-Seal™ is a flexible, "stretchable", and tear resistant flashing detail tape that allows for easy installation in awkward...

T1 - Termination Bar is used at top of flashing to secure it to backup and is compatible with all H&B membrane and copper-laminate flashings....

T2 - Aluminum Termination Bar, which has a 1/4” flange on top for easy caulking, is used at the top of flashing to secure it to backup. Compatible...

T2 - Termination Bar, which has a 3/8” flange on top for easy caulking, is used at top of flashing to secure it to backup. Compatible with all H&B...

H&B's Textroflash™ Flashing a thru-wall flashing/surface-mounted flashing is a 40-mil thick composite membrane with a new, proprietary adhesive...

X-Barrier™ is a sheet applied self-adhesive, membrane to provide an air and water barrier when applied to above grade wall assemblies....

X-Seal® Membrane is a self-Sealing, self-adhering detail tape designed to work in conjunction with ENVIRO-BARRIER™ system. X-Seal®...

X-SEAL® TAPE is adhesive-backed and is applied to the substrate behind the X-SEAL® Anchor for additional protection against air and moisture...
Displaying 1 to 26 (of 26 products)