130 Truss-Tri-Mesh has three longitudinal (side) rods to reinforce block and brick composite walls Hohmann & Barnard's Lox All® Truss-Mesh and Lox details
140 Truss Twin-Mesh has 4 Longitudinal (Side) Rods to reinforce block-and-brick or block-and-block composite walls (block-and-block product and details
170 Lox-All® Truss Style Adjustable Joint Reinforcement with Eyelets for vertical adjustability and the H&B Seismic Hook for continuous wire. H&B details
170-ML Truss Adjustable Eye-Wire Joint Reinforcement features super-heavy-duty eyelets for superior strength and performance. This is especially details
170-ML Truss Adjustable Eye-Wire w/S.I.S. combines the beneficial features of the 170 Mighty-Lok™ adjustable truss joint reinforcement with the details
The 170-ML Truss Adjustable Eye-Wire and Mighty-Lok with Welded Seismic Clip system, features super-heavy-duty eyelets for superior strength and details
Ties the masonry veneer to the substrate. The The Concrete Seal Tie's screw portion has special alternating threads making it suitable for use with details
Does your thermal anchor pass the test? READ THE REPORT! The Thermal 2-Seal™ Wing Nut Anchor is an innovative single screw veneer tie for metal details
220 Glass Block reinforcement is continuous lengths of joint reinforcement that is embedded into the horizontal mortar joints of glass block wall details
220 Ladder Mesh Reinforcement's cross rods are spaced so block cells are not obstructed, allowing easy placement of vertical rebars A full 8" splice details
270-ML Ladder Adjustable Eye-Wire joint reinforcement features super-heavy-duty eyelets for superior strength and performance. This is especially details
The 270-ML Ladder Adjustable Eye-Wire and Mighty-Lok with Welded Seismic Clip system features super-heavy-duty eyelets for superior strength and details
270-ML-S.I.S. Ladder Adjustable Eye-Wire combines the beneficial features of the 270-ML Ladder Adjustable Eye-Wire joint reinforcement with the details
For anchoring masonry to concrete with #305 Dovetail Slot AVAILABLE FINISHES: Hot Dip Galvanized Stainless Steel DIMENSIONS: Thickness: 16 Gauge, details
303 SV - Seismic-Notch Dovetail Anchor is modified to comply with seismic codes, which call for continuous wire in the veneer to be an integral details
The 315-BL Byna-Lok is fitted with a dovetail head to fit 305 Dovetail Slot. New masonry veneer is anchored to studs, existing masonry, concrete or details
341 Series Round Plastic Weep Holes provide an outlet for water inside a building to move outside the wall and evaporate, they are manufactured from details
342 Rectangular plastic weep holes provide an outlet for water inside a building to move outside the wall and evaporate, they are manufactured from details
The 344 - Rigid Partition Anchor is for anchoring load bearing walls at intersections AVAILABLE FINISHES: Plain Steel Hot Dip Galv. Stainless Steel details
The 345-BT Flexible Tie is for tying masonry to concrete or CMU backup with a flexible (not rigid) connection. Comprised of a Vee Byna-Tie® with a details
The 351 - Wire Column Tie is for anchoring masonry to structural column when masonry is parallel to column flange. DIMENSIONS/GAUGES: 3/16" or 1/4" details
The 352 - Wire Column Tie is for anchoring masonry to structural columns when masonry is perpendicular to column flange DIMENSIONS/GAUGES: 3/16" or details
The 353 - Column Anchor is for anchoring block or brick to structural columns when masonry is perpendicular to the column flange DIMENSIONS/GAUGES: details
The 353L - Column Anchor anchors masonry to the building frame while restraining both positive and negative wind load actions, it has a slotted hole details