Downloads - Safety Data Sheets


HB-213 Adjustable Veneer Anchor
The HB-213 is an adjustable veneer anchor for metal stud and wood stud construction. The compressed leg 2X-HOOK™ has been tested and designed details
HB-213 SH Seismic Veneer Anchor
The HB-213 SH is comprised of the HB-213 Adjustable Veneer Anchor and H&B's Seismic Hook, the hook is "swaged" (indented) in two places to details
HB-5213 Adjustable Veneer Anchor
HB-5213 adjustable veneer anchor designed to anchor masonry to concrete, block or brick, accommodating rigid insulation up to 6 inches (75mm) thick. details
High Strength Veneer Anchor HB-213-HS
HB-213-HS is a High-Strength Veneer Anchor System for heavy-duty applications. It combines the HB-213 and H&B’s Heavy Duty 1/4” diameter details
HW-340 Malleable Iron Wedge Inserts
HW-340 Malleable Iron Wedge Inserts are embedded into concrete slabs to allow for secure and adjustable attachment of materials to a concrete details
LIGHTNING-FLASH™ Wall Flashing
LIGHTNING-FLASH™ WALL FLASHING, made with 3M™ technology - is designed for use as a through-wall flashing and damp-proof course. Its details
Liquid-Flash™
Liquid-Flash is formulated using a high performance silyl-terminated polyether polymer technology (STPE). It is a single component, moisture cure details
LW-340 Malleable Iron Wedge Insert
LW-340 Long Wedge Insert is suitable for use at the bottom of the slab or when additional vertical adjustability is needed. Wedge inserts are details
MFL - Metal Flashing
MFL - Metal Flashing can be formed according to job requirements. State dimensions when ordering. Comes standard with factory formed, hemmed drip details
MGS - Mortar/Grout Screen
Mortar/Grout Screen (MGS) is a 1/4" square monofilament screen fabricated from high-strength, non-corrosive polypropylene polymers which offers the details
Mighty-Flash™ NA Residential
Mighty-Flash™ NA is an excellent for flashing pressure-treated and composite decks. Mighty-Flash™ NA, a stainless steel fabric flashing, details
    Mighty-Flash™ SA Residential
    Mighty-Flash™ SA is an excellent for flashing pressure-treated and composite decks. A self-adhering stainless steel fabric flashing product details
      Mighty-Flash™ SA Self-Adhering SS Fabric Flashing
      Mighty-Flash™ SA is a self-adhering stainless steel fabric flashing product with a proprietary clear adhesive. The adhesive is details
      Mighty-Flash™ Stainless Steel Fabric Flashing
      Mighty-Flash™ is a stainless steel fabric flashing, a Class A material consisting of a layer of polymeric fabric with a single sheet of 304 details
      MIGHTY-LOK™ HOOK
      The new Mighty-Lok™ HOOK, is a Heavy Duty 1/4” diameter compressed leg pintle that is flattened and serrated to fit a 3/8” mortar joint details
      Mortar Trap™
      Mortar Trap™ is manufactured from high-density polyethylene (HDPE) strands woven into a 90% open mesh. Its unique shape breaks up mortar droppings details
      Mortar Trap™ Weep Vents
      A 100% recycled polyester plastic non-woven mesh vent which is treated with a flame retardant and ultra-violet inhibitors. Used in vertical joints details
      Mortar Web™
      Mortar Web suspends mortar droppings and redirects moisture to the exterior of the structure. Bypassing mortar collection altogether, moisture is details
      MR - Masonry Reglet
      The MR - Masonry Reglet, made of rigid PVC, is embedded into the mortar joint of masonry backup to accept flashing. Built-in face plate keeps mortar details
      MWT - Mesh Wall Tie
      Mesh Wall Tie (MWT) for bonding intersecting masonry walls Conforms to ASTM A 153 (Hot-dip Galvanized) Conforms to ASTM E 437, Type 304 (Stainless details
      NS - Closed Cell Neoprene Sponge
      NS - Closed Cell Neoprene Sponge is placed horizontally beneath relieving angle, or in the vertical expansion joint to act as a control joint Also details
      Panel-Lok®
      PANEL-LOK® Mechanical Restraining Anchors for Re-Anchoring Stone Panel Veneers The Panel-Lok® panel re-anchoring system is an easy to use, details
      Primer-SA Water-Based Primer for Self-Adhering Flashing
      Hohmann & Barnard’s Primer-SA is a water based, modified polymer primer that can be used in a variety of self adhering flashing applications. details
      ProWall Tools
      Visit prowall.h-b.com to start using this FREE and EXCLUSIVE SOFTWARE today! The Thermal Brick Support (TBS) System is now part of ProWall Tools! details
        PTA Series Anchors - PTA 310
        PTA 310 Partition Top Anchors provide lateral shear resistance at the upper limit of masonry walls. They permit vertical deflection of the slab details
        PTA Series Anchors - PTA 310 HS
        PTA 310 HS is a heavy-duty version of our PTA 310 Partition Top Anchors, developed to provide lateral shear resistance at the upper limit of masonry details
        PTA Series Anchors - PTA 364
        PTA 364 Partition Top Anchors have been developed to provide lateral shear resistance at the upper limit of masonry walls. They permit vertical details
        PTA Series Anchors - PTA 420
        The PTA 420 Partition Top Anchor has been developed to provide lateral shear resistance at the upper limit of masonry walls. They permit vertical details
        PTA Series Anchors - PTA 422
        PTA 422 Partition Top Anchors have been developed to provide lateral shear resistance at the upper limit of masonry walls. They permit vertical details
        PTA Series Anchors - PTA RN (ROD & NUT)
        PTA RN (ROD & NUT) Partition Top Anchors have been developed to provide lateral shear resistance at the upper limit of masonry walls. They details
        QV - Quadro-Vent™
        QV - Quadro-Vent's honeycomb design allows passage of moisture from cavity to the building exterior while restricting ingress of insects and other details
        RB Rebar Positioners
        RB Rebar Positioners position two rebar in center of block, the simple Z-shaped wire bridges the cell of the block while bends rest on the shell details
        RB-Twin Rebar Positioners
        RB-Twin Rebar Positioners have double loops to hold four rebar in the center of the block, the simple Z-shaped wire bridges the cell of block while details
        RS Series - Rubber Control Joint
        RS Series is a Rubber Control Joint designed for masonry walls at control joints Extruded rubber material Rubber material conforms to ASTM D-2000 details
        Seismic Clip 300C w/HB-213
        The 300C is a seismic clip welded to a hook (pintle) and designed for use with the HB-213 adjustable veneer anchor. That features a L-shaped plate details
        Seismic Hook
        Hohmann & Barnard's SH-Seismic Hook: This hook is "swaged" (indented) in two places to accommodate either a 9 gauge or 3/16" continuous wire A details
        Seismic Plate Pintle HB-213S w/HB-213 (T-LOK TIE™)
        The HB-213 w/HB-213S, formerly known as T-LOK TIE™ is an adjustable veneer anchor assembly with a heavy-duty plate pintle that features a details
        Seismiclip® Interlock System (S.I.S.) - Seismic Clip
        The Seismiclip® (S.I.S.) seismic clip will accept standard H&B Wire Ties and Continuous Wire. Horizontal Joint Reinforcement Wire and Masonry details
        Sharktooth Insert
        H&B Sharktooth Insert has various applications and is capable of developing working loads up to 8,000#/ft. in both shear and tension. It is details
        Spira-Lok®
        Spira-Lok® is the Original Helical Wall Tie System A one-piece, flexible stainless steel wall tie for pinning masonry to new or existing walls. details
        SPYRA-LOX® Rebar Lap-Joint Tie
        SPYRA-LOX® Rebar Lap-Joint Tie eliminates cumbersome procedure of tying lap-joined rebars together in reinforced walls. Increases worker details
        Stone Anchors
        For more than 75 years, Hohmann & Barnard, Inc. has specialized in the design and manufacture of stone anchoring systems. In addition to designing details
        Stone Anchors (2-SEAL™)
        H&B is now offering stone anchor systems that incorporate the popular 2-SEAL™ and 2-SEAL™ THERMAL WING NUT anchors. Click on anchor details
          Stretch-X-Seal™ Detail Tape
          Stretch-X-Seal™ is a flexible, "stretchable", and tear resistant flashing detail tape that allows for easy installation in awkward details
          Stretch-X-Seal™ Window Flashing
          Stretch-X-Seal™ is a “stretchable” flashing tape for Window Sills and Difficult Shapes often found in residential construction projects. Made details
            T1 - Termination Bar
            T1 - Termination Bar is used at top of flashing to secure it to backup and is compatible with all H&B membrane and copper/stainless steel composite details
            T2 - Aluminum Termination Bar
            T2 - Aluminum Termination Bar, which has a 1/4” flange on top for easy caulking, is used at the top of flashing to secure it to backup. Compatible details
            T2 - Termination Bar
            T2 - Termination Bar, which has a 3/8” flange on top for easy caulking, is used at top of flashing to secure it to backup. Compatible with all H&B details

            Narrow Your Results

            By Category:


            By CONSTRUCTION CONDITIONS:


            By BACKUP TYPE/CONDITIONS:


            By AVAILABLE FINISHES:


            By JOINT REINFORCEMENT TYPE:


            By JOINT REINFORCEMENT FEATURE:


            By WIRE SIZE:


            By ANCHOR TYPE:


            By ANCHOR FEATURES:


            By AIR BARRIER TYPE:


            By AIR BARRIER FEATURE:


            By DIMENSIONS/GAUGES:


            By FLASHING/DETAIL TAPE FEATURES:


            By COLUMN/BEAM ANCHOR POSITION:


            By COLUMN/BEAM ANCHOR FEATURES:


            By COLUMN TIE WIRE DIAM: