Downloads - LEED

This page lists links to LEED files for Hohmann & Barnard products along with links (product name in bold) to detailed information about each product.

Go to our main download page for "one stop" access all of our product documents (Submittal Sheets, SDS, CAD*, and LEED Forms)
*CAD files are only available for registered users.

DOWNLOAD a LEED form with all HOHMANN & BARNARD product's LEED information.


HB-213 Adjustable Veneer Anchor
The HB-213 is an adjustable veneer anchor for metal stud and wood stud construction. The compressed leg 2X-HOOK™ has been tested and designed details

Please contact your local H&B Representative for LEED information.

HB-213 S.I.S. Seismic Veneer Anchor
The HB-213 S.I.S. is comprised of the HB-213 Adjustable Veneer Anchor and the Seismiclip® Interlock System, which accepts continuous wire for details

Please contact your local H&B Representative for LEED information.

HB-213 SH Seismic Veneer Anchor
The HB-213 SH is comprised of the HB-213 Adjustable Veneer Anchor and H&B's Seismic Hook, the hook is "swaged" (indented) in two places to details

Please contact your local H&B Representative for LEED information.

HB-5213 Adjustable Veneer Anchor
HB-5213 adjustable veneer anchor designed to anchor masonry to concrete, block or brick, accommodating rigid insulation up to 6 inches (75mm) thick. details

Please contact your local H&B Representative for LEED information.

High Strength Veneer Anchor HB-213-HS
HB-213-HS is a High-Strength Veneer Anchor System for heavy-duty applications. It combines the HB-213 and H&B’s Heavy Duty 1/4” diameter details

Please contact your local H&B Representative for LEED information.

HW-340 Malleable Iron Wedge Inserts
HW-340 Malleable Iron Wedge Inserts are embedded into concrete slabs to allow for secure and adjustable attachment of materials to a concrete details

Please contact your local H&B Representative for LEED information.

LIGHTNING-FLASH™ Wall Flashing
LIGHTNING-FLASH™ WALL FLASHING, made with 3M™ technology - is designed for use as a through-wall flashing and damp-proof course. Its details

Please contact your local H&B Representative for LEED information.

Liquid-Flash™
Liquid-Flash is formulated using a high performance silyl-terminated polyether polymer technology (STPE). It is a single component, moisture cure details

Please contact your local H&B Representative for LEED information.

LW-340 Malleable Iron Wedge Insert
LW-340 Long Wedge Insert is suitable for use at the bottom of the slab or when additional vertical adjustability is needed. Wedge inserts are details

Please contact your local H&B Representative for LEED information.

MFL - Metal Flashing
MFL - Metal Flashing can be formed according to job requirements. State dimensions when ordering. Comes standard with factory formed, hemmed drip details

Please contact your local H&B Representative for LEED information.

MGS - Mortar/Grout Screen
Mortar/Grout Screen (MGS) is a 1/4" square monofilament screen fabricated from high-strength, non-corrosive polypropylene polymers which offers the details

Please contact your local H&B Representative for LEED information.

Mighty-Flash™ NA Residential
Mighty-Flash™ NA is an excellent for flashing pressure-treated and composite decks. Mighty-Flash™ NA, a stainless steel fabric flashing, details

Please contact your local H&B Representative for LEED information.

Mighty-Flash™ SA Residential
Mighty-Flash™ SA is an excellent for flashing pressure-treated and composite decks. A self-adhering stainless steel fabric flashing product details

Please contact your local H&B Representative for LEED information.

Mighty-Flash™ SA Self-Adhering SS Fabric Flashing
Mighty-Flash™ SA is a self-adhering stainless steel fabric flashing product with a proprietary clear adhesive. The adhesive is details

Please contact your local H&B Representative for LEED information.

Mighty-Flash™ Stainless Steel Fabric Flashing
Mighty-Flash™ is a stainless steel fabric flashing, a Class A material consisting of a layer of polymeric fabric with a single sheet of 304 details

Please contact your local H&B Representative for LEED information.

MIGHTY-LOK™ HOOK
The new Mighty-Lok™ HOOK, is a Heavy Duty 1/4” diameter compressed leg pintle that is flattened and serrated to fit a 3/8” mortar joint details

Please contact your local H&B Representative for LEED information.

Mortar Trap™
Mortar Trap™ is a mortar collection device manufactured from high-quality polypropylene strands woven into a 90% open mesh. When used with properly details

Please contact your local H&B Representative for LEED information.

Mortar Trap™ Weep Vents
A 100% recycled polyester plastic non-woven mesh vent which is treated with a flame retardant and ultra-violet inhibitors. Used in vertical joints details

Please contact your local H&B Representative for LEED information.

Mortar Web™
Mortar Web suspends mortar droppings and redirects moisture to the exterior of the structure. Bypassing mortar collection altogether, moisture is details

Please contact your local H&B Representative for LEED information.

MR - Masonry Reglet
The MR - Masonry Reglet, made of rigid PVC, is embedded into the mortar joint of masonry backup to accept flashing. Built-in face plate keeps mortar details

Please contact your local H&B Representative for LEED information.

MWT - Mesh Wall Tie
Mesh Wall Tie (MWT) for bonding intersecting masonry walls Conforms to ASTM A 153 (Hot-dip Galvanized) Conforms to ASTM E 437, Type 304 (Stainless details

Please contact your local H&B Representative for LEED information.

NS - Closed Cell Neoprene Sponge
NS - Closed Cell Neoprene Sponge is placed horizontally beneath relieving angle, or in the vertical expansion joint to act as a control joint Also details

Please contact your local H&B Representative for LEED information.

Panel-Lok®
PANEL-LOK® Mechanical Restraining Anchors for Re-Anchoring Stone Panel Veneers The Panel-Lok® panel re-anchoring system is an easy to use, details

Please contact your local H&B Representative for LEED information.

Primer-SA Water-Based Primer for Self-Adhering Flashing
Hohmann & Barnard’s Primer-SA is a water based, modified polymer primer that can be used in a variety of self adhering flashing applications. details

Please contact your local H&B Representative for LEED information.

ProWall Tools
Visit prowall.h-b.com to start using this FREE and EXCLUSIVE SOFTWARE today! The Thermal Brick Support (TBS) System is now part of ProWall Tools! details

Please contact your local H&B Representative for LEED information.

PTA Series Anchors - PTA 310
PTA 310 Partition Top Anchors provide lateral shear resistance at the upper limit of masonry walls. They permit vertical deflection of the slab details

Please contact your local H&B Representative for LEED information.

PTA Series Anchors - PTA 310 HS
PTA 310 HS is a heavy-duty version of our PTA 310 Partition Top Anchors, developed to provide lateral shear resistance at the upper limit of masonry details

Please contact your local H&B Representative for LEED information.

PTA Series Anchors - PTA 364
PTA 364 Partition Top Anchors have been developed to provide lateral shear resistance at the upper limit of masonry walls. They permit vertical details

Please contact your local H&B Representative for LEED information.

PTA Series Anchors - PTA 420
The PTA 420 Partition Top Anchor has been developed to provide lateral shear resistance at the upper limit of masonry walls. They permit vertical details

Please contact your local H&B Representative for LEED information.

PTA Series Anchors - PTA 422
PTA 422 Partition Top Anchors have been developed to provide lateral shear resistance at the upper limit of masonry walls. They permit vertical details

Please contact your local H&B Representative for LEED information.

PTA Series Anchors - PTA RN (ROD & NUT)
PTA RN (ROD & NUT) Partition Top Anchors have been developed to provide lateral shear resistance at the upper limit of masonry walls. They details

Please contact your local H&B Representative for LEED information.

QV - Quadro-Vent™
QV - Quadro-Vent's honeycomb design allows passage of moisture from cavity to the building exterior while restricting ingress of insects and other details

Please contact your local H&B Representative for LEED information.

RB Rebar Positioners
RB Rebar Positioners position two rebar in center of block, the simple Z-shaped wire bridges the cell of the block while bends rest on the shell details

Please contact your local H&B Representative for LEED information.

RB-Twin Rebar Positioners
RB-Twin Rebar Positioners have double loops to hold four rebar in the center of the block, the simple Z-shaped wire bridges the cell of block while details

Please contact your local H&B Representative for LEED information.

RS Series - Rubber Control Joint
RS Series is a Rubber Control Joint designed for masonry walls at control joints Extruded rubber material Rubber material conforms to ASTM D-2000 details

Please contact your local H&B Representative for LEED information.

Seismic Clip 300C w/HB-213
The 300C is a seismic clip welded to a hook (pintle) and designed for use with the HB-213 adjustable veneer anchor. That features a L-shaped plate details

Please contact your local H&B Representative for LEED information.

Seismic Hook
Hohmann & Barnard's SH-Seismic Hook: This hook is "swaged" (indented) in two places to accommodate either a 9 gauge or 3/16" continuous wire A details

Please contact your local H&B Representative for LEED information.

Seismic Plate Pintle HB-213S w/HB-213 (T-LOK TIE™)
The HB-213 w/HB-213S, formerly known as T-LOK TIE™ is an adjustable veneer anchor assembly with a heavy-duty plate pintle that features a details

Please contact your local H&B Representative for LEED information.

Seismiclip® Interlock System (S.I.S.) - Seismic Clip
The Seismiclip® (S.I.S.) seismic clip will accept standard H&B Wire Ties and Continuous Wire. Horizontal Joint Reinforcement Wire and Masonry details

Please contact your local H&B Representative for LEED information.

Sharktooth Insert
H&B Sharktooth Insert has various applications and is capable of developing working loads up to 8,000#/ft. in both shear and tension. It is details

Please contact your local H&B Representative for LEED information.

Slip-Set™ Stabilizer
The Slip-Set™ Stabilizer bonds masonry walls and restrains lateral (shear) movements while allowing expansion and control joints to perform as details

Please contact your local H&B Representative for LEED information.

Spira-Lok®
Spira-Lok® is the Original Helical Wall Tie System A one-piece, flexible stainless steel wall tie for pinning masonry to new or existing walls. details

Please contact your local H&B Representative for LEED information.

SPYRA-LOX® Rebar Lap-Joint Tie
SPYRA-LOX® Rebar Lap-Joint Tie eliminates cumbersome procedure of tying lap-joined rebars together in reinforced walls. Increases worker details

Please contact your local H&B Representative for LEED information.

Stone Anchors
For more than 75 years, Hohmann & Barnard, Inc. has specialized in the design and manufacture of stone anchoring systems. In addition to designing details

Please contact your local H&B Representative for LEED information.

Stone Anchors (2-SEAL™)
H&B is now offering stone anchor systems that incorporate the popular 2-SEAL™ and 2-SEAL™ THERMAL WING NUT anchors. Click on anchor details

Please contact your local H&B Representative for LEED information.

Stretch-X-Seal™ Detail Tape
Stretch-X-Seal™ is a flexible, "stretchable", and tear resistant flashing detail tape that allows for easy installation in awkward details

Please contact your local H&B Representative for LEED information.

Stretch-X-Seal™ Window Flashing
Stretch-X-Seal™ is a “stretchable” flashing tape for Window Sills and Difficult Shapes often found in residential construction projects. Made details

Please contact your local H&B Representative for LEED information.

T1 - Termination Bar
T1 - Termination Bar is used at top of flashing to secure it to backup and is compatible with all H&B membrane and copper/stainless steel composite details

Please contact your local H&B Representative for LEED information.

T2 - Aluminum Termination Bar
T2 - Aluminum Termination Bar, which has a 1/4” flange on top for easy caulking, is used at the top of flashing to secure it to backup. Compatible details

Please contact your local H&B Representative for LEED information.

T2 - Termination Bar
T2 - Termination Bar, which has a 3/8” flange on top for easy caulking, is used at top of flashing to secure it to backup. Compatible with all H&B details

Please contact your local H&B Representative for LEED information.

Narrow Your Results

By Category:


By CONSTRUCTION CONDITIONS:


By BACKUP TYPE/CONDITIONS:


By AVAILABLE FINISHES:


By JOINT REINFORCEMENT TYPE:


By JOINT REINFORCEMENT FEATURE:


By WIRE SIZE:


By ANCHOR TYPE:


By ANCHOR FEATURES:


By AIR BARRIER TYPE:


By AIR BARRIER FEATURE:


By DIMENSIONS/GAUGES:


By FLASHING/DETAIL TAPE FEATURES:


By COLUMN/BEAM ANCHOR POSITION:


By COLUMN/BEAM ANCHOR FEATURES:


By COLUMN TIE WIRE DIAM: