Downloads - LEED

This page lists links to LEED files for Hohmann & Barnard products along with links (product name in bold) to detailed information about each product.

Go to our main download page for "one stop" access all of our product documents (Submittal Sheets, SDS, CAD*, and LEED Forms)
*CAD files are only available for registered users.

DOWNLOAD a LEED form with all HOHMANN & BARNARD product's LEED information.


355 Column Anchor
The 355 Column Anchor is for anchoring masonry to structural columns when masonry is parallel to the column flange DIMENSIONS/GAUGES: 1/4" thick x 1 details

Please contact your local H&B Representative for LEED information.

355L - Column Anchor
The 355L - Column Anchor anchors masonry to the building frame while restraining both positive and negative wind load actions, it has a slotted hole details

Please contact your local H&B Representative for LEED information.

356 Column Anchor
The 356 Column Anchor is for anchoring masonry to structural column when masonry is parallel to column web The 356L has a slotted hole to accept details

Please contact your local H&B Representative for LEED information.

356L Column Anchor
The 356L Column Anchor is for anchoring masonry to structural columns when masonry is parallel to the column web The 356L has a slotted hole to details

Please contact your local H&B Representative for LEED information.

357 - Beam Anchor
The 357 - Beam Anchor is for anchoring masonry to structural beams DIMENSIONS/GAUGES: Standard size is 1 1/4" wide x 12 ga. thick x 12" long details

Please contact your local H&B Representative for LEED information.

359 - Weld-on Ties
359 Weld-on Ties are used in conjunction with the Vee-Byna Tie® or the 301W Column Web Tie The systems anchor masonry to the structural frame, details

Please contact your local H&B Representative for LEED information.

359-C - Weld-on Ties
359-C - Weld-on Ties are used in conjunction with the Vee-Byna Tie® or the 301W Column Web Tie The systems anchor masonry to the structural details

Please contact your local H&B Representative for LEED information.

359-FH - Weld-on Ties
359-FH - Weld-on Ties are used in conjunction with the Vee-Byna Tie® or the 302W Column Web Tie The systems anchor masonry to the structural details

Please contact your local H&B Representative for LEED information.

359FP - Weld-On Ties
359FP - Weld-On Ties are for use when there is a requirement for spray-on fireproofing Exaggerated offset dimension 'L' (specify when ordering) details

Please contact your local H&B Representative for LEED information.

359FP-C - Weld-on Ties
359FP-C - Weld-on Ties are for use when there is a requirement for spray-on fireproofing Exaggerated offset dimension 'L' (specify when ordering) details

Please contact your local H&B Representative for LEED information.

360 Gripstay™ Channel Slot
The 360 Gripstay™ Channel Slot is welded onto steel web or flange and accepts any type of Gripstay Anchor DIMENSIONS/GAUGES: 7-1/2" long details

Please contact your local H&B Representative for LEED information.

362 - Gripstay™ Channel Slot
The 362 - Gripstay™ Channel Slot is furnished with integrally formed end tabs for attachment to masonry. Accepts any Gripstay™ Anchor for details

Please contact your local H&B Representative for LEED information.

362-C - Gripstay™ Channel Slot
The 362-C - Gripstay™ Channel Slot is a continuous Gripstay™ channel and accepts any Gripstay™ Anchor for masonry or stone details

Please contact your local H&B Representative for LEED information.

362-CX - Gripstay™ Channel Slot
The 362-CX Gripstay™ Channel is for use on backup block with insulation. Factory-welded prongs bridge the insulation and abut the concrete details

Please contact your local H&B Representative for LEED information.

363 - Flexible Gripstay™ Channel Slot Anchor Head
The 363 - Flexible Gripstay™ Channel Anchor Head permits horizontal and vertical movement of the masonry wall while restraining the wall from details

Please contact your local H&B Representative for LEED information.

363-BL - Byna-Lok™ Flexible Gripstay™ Channel Slot Anchor
The 363-BL is comprised of a Byna-Lok™ Wire Tie fitted with a 363 Gripstay™ head to fit any style Gripstay™ Channel Slot. The details

Please contact your local H&B Representative for LEED information.

363-BT - Flexible Gripstay™ Channel Slot Anchor
The 363-BT is comprised of a Vee Byna- Tie® fitted with a Gripstay head to fit any style Gripstay Channel. (360, 361, 362, 362-C, 362-CX) 363-BT details

Please contact your local H&B Representative for LEED information.

364 SV - Seismic-Notch Gripstay™ Channel Slot Anchor
364 SV - Seismic-Notch Gripstay™ Channel Slot Anchor is modified to comply with seismic codes, which call for continuous wire in the veneer to details

Please contact your local H&B Representative for LEED information.

365 - Bent Gripstay™ Channel Slot Anchor
The 365 Bent Gripstay™ Channel Slot anchor ties masonry to steel columns, concrete or existing walls The 365 has standard 1" bend. Longer details

Please contact your local H&B Representative for LEED information.

Adjustable Wall Ties (Pintles & Eyes)
STANDARD SIZES: Pintle Section TIE NO. SIZE 300H 3” 400H 4” 475H 4-3/4” 525H 5-1/4” Eye Section TIE NO. details

Please contact your local H&B Representative for LEED information.

Adjusto-Tie™ Adjustable Veneer Anchor
Adjusto-Tie™ an innovative single screw veneer tie for metal stud construction with a factory-installed EPDM washer to secure rigid insulation details

Please contact your local H&B Representative for LEED information.

Askew Head Bolt
The beveled head of the askew head bolt engages the internal wedge shape of H&B concrete inserts (LW-340 or HW-340) and produces an automatic details

Please contact your local H&B Representative for LEED information.

Backer Rod - Standard
Standard Backer Rod is an ideal non-absorbent compressible backup material inserted into a joint to control sealant depth, create a backstop to allow details

Please contact your local H&B Representative for LEED information.

BL-407 Anchor
BL-407 is a wire tie and plate combination system that provides adjustability, strength, stiffness, positive connection, corrosion resistance, and is details

Please contact your local H&B Representative for LEED information.

BL-523 Brass Expansion Bolt
The BL-523 Brass Expansion Bolt is for fastening anchors to concrete, block, brick and into mortar joints. TECH DATA: Internal Bolt: Type 304 details

Please contact your local H&B Representative for LEED information.

Byna-Lok™ Seismic Wire Tie
New masonry veneer can be anchored to studs, existing masonry, concrete or steel with the Byna-Lok Wire Tie. Various H&B Anchor systems can be fitted details

Please contact your local H&B Representative for LEED information.

Cast Aluminum Brick Vents - Style "CA"
Style "CA" brick vents features: Cast Aluminum Mill Finish* Rear waterstop Load-bearing One piece molded unit Overlapping blades Continuous details

Please contact your local H&B Representative for LEED information.

Channel-Tee Seismic-Notch Anchor System
The Channel-Tee Seismic-Notch Anchor System is ideal for use where maximum vertical adjustability is preferred. The Continuous Channel is surface details

Please contact your local H&B Representative for LEED information.

Concealed Lintel Systems
New! Designed and engineered concealed lintel systems for brickwork Architects can feel free to incorporate this classic look into prestigious details

Please contact your local H&B Representative for LEED information.

Continuous Wire
The use of a continuous wire in masonry veneer walls is beneficial in providing additional protection against problems arising from thermal expansion details

Please contact your local H&B Representative for LEED information.

COPPER GUARD™
COPPER GUARD™ is a permanent premium quality rolled or sheet copper flashing for any trim work required. Excellent for forming valleys, drip details

Please contact your local H&B Representative for LEED information.

Copper-Fabric™ NA Copper Fabric Flashing
Copper-Fabric™ NA Copper Fabric Flashing is a composite membrane consisting of a polyethylene film laminated to BOTH sides of a 3, 5, or 7 oz. details

Please contact your local H&B Representative for LEED information.

Copper-Fabric™ SA Self-Adhering Flashing
SA Self-Adhering Copper Fabric Flashing is a composite membrane consisting of a polyethylene film laminated to a 3, 5, or 7 oz. copper sheet to details

Please contact your local H&B Representative for LEED information.

Corners & End Dams - Copper
Hohmann & Barnard's Soldered Copper End Dams, Inside Corners and Outside Corners are for use with H&B specified flashings for protection details

Please contact your local H&B Representative for LEED information.

Corners & End Dams - Stainless Steel
Soldered Stainless Steel End Dam, Inside Corner and Outside Corner for use with H&B specified flashings for protection against moisture details

Please contact your local H&B Representative for LEED information.

CR - Concrete Reglet
CR - Concrete Reglet, made of rigid PVC, attaches easily to form for poured concrete conditions; with a built-in face plate that keeps mortar out, details

Please contact your local H&B Representative for LEED information.

CWT - Corrugated Wall Tie
The Corrugated Wall Tie is for anchoring wood stud to masonry. This product is only recommended for use in residential construction. GAUGES: details

Please contact your local H&B Representative for LEED information.

Drip Plates/Edges
Drip Plates (Drip Edge) DP Our Standard Drip Plate, furnished with a smooth, factory-formed hemmed edge for installation safety and uniform details

Please contact your local H&B Representative for LEED information.

DW-10HS® Byna-Lok® Seismic Veneer Anchor
The DW-10HS® with Byna-Lok® is a seismic veneer anchoring system comprised of the high strength brick veneer anchor, DW-10HS®, combined with the details

Please contact your local H&B Representative for LEED information.

DW-10HS® S.I.S. Seismic Veneer Anchor
The DW-10HS® Seismiclip® Interlock System is a seismic veneer anchoring system comprised of a high strength brick veneer anchor, DW-10HS™, details

Please contact your local H&B Representative for LEED information.

DW-10HS® Veneer Anchor
DW-10HS® is for anchoring brick veneer to metal stud, masonry, concrete or wood backup. (We carry a wide variety of screws for various types of details

Please contact your local H&B Representative for LEED information.

ENVIRO-BARRIER™
ENVIRO-BARRIER™ is a single component, fluid applied, elastomeric membrane to provide an air, water and vapor barrier when applied to above details

Please contact your local H&B Representative for LEED information.

ENVIRO-BARRIER™ SILICONE SYSTEM
ENVIRO-BARRIER™ SILICONE is a silicone air and water-resistive barrier (AWB) that has a 100% silicone coating that is solvent-free, details

Please contact your local H&B Representative for LEED information.

ENVIRO-BARRIER™ VP
The reformulated ENVIRO-BARRIER™ VP is a single component, fluid applied, vapor permeable air and water barrier for above grade wall details

Please contact your local H&B Representative for LEED information.

Flex-Flash® Flashing
H&B's Flex-Flash® is a polyester scrim reinforced 40-mil thick product formulated with Elvaloy® Kee. It does not drool and combines the details

Please contact your local H&B Representative for LEED information.

HB BELOW-GRADE 60
HB BELOW-GRADE 60 is a 60 mil Heavy Duty Self-Adhering Below-Grade Waterproofing Membrane, that features a woven polyethylene membrane coated on both details

Please contact your local H&B Representative for LEED information.

HB RS EZclad Rainscreen Support System
The HB RS EZclad Rainscreen Support System is fully engineered to project conditions by H&B’s team of engineers. The system uses stainless details

Please contact your local H&B Representative for LEED information.

HB RS FLEXbracket Rainscreen Support Bracket
The HB RS FLEXbracket Rainscreen Support Bracket is a stainless steel universal bracket that is ordered to fit the depth of insulation needed on a details

Please contact your local H&B Representative for LEED information.

HB Sealant
HB SEALANT is a multi-purpose, resilient joint sealant that combines economy and high performance. It is ideal for a wide range of applications where details

Please contact your local H&B Representative for LEED information.

HB-200-X
The NEW HB-200-X improves upon the standard HB-200 by adding three pronged punchouts that project from the back of the anchor. The prongs prevent details

Please contact your local H&B Representative for LEED information.

Narrow Your Results

By Category:


By CONSTRUCTION CONDITIONS:


By BACKUP TYPE/CONDITIONS:


By AVAILABLE FINISHES:


By JOINT REINFORCEMENT TYPE:


By JOINT REINFORCEMENT FEATURE:


By WIRE SIZE:


By ANCHOR TYPE:


By ANCHOR FEATURES:


By AIR BARRIER TYPE:


By AIR BARRIER FEATURE:


By DIMENSIONS/GAUGES:


By FLASHING/DETAIL TAPE FEATURES:


By COLUMN/BEAM ANCHOR POSITION:


By COLUMN/BEAM ANCHOR FEATURES:


By COLUMN TIE WIRE DIAM: