Home Downloads

Downloads

Try the new ProWall Tool: Submittal Portal. Generate submittal packages 10 TIMES faster!

Displaying 101 to 150 (of 167 products)

The HB-213 SH is comprised of the HB-213 Adjustable Veneer Anchor and H&B's Seismic Hook, the hook is "swaged" (indented) in two places to details

Submittal Sheet (PDF)

Please contact your local H&B Representative for LEED information.

HB-5213 Adjustable Veneer Anchor

HB-5213 adjustable veneer anchor designed to anchor masonry to concrete, block or brick, accommodating rigid insulation up to 6 inches (75mm) thick. details

Submittal Sheet (PDF)

Please contact your local H&B Representative for LEED information.

High Strength Veneer Anchor HB-213-HS

HB-213-HS is a High-Strength Veneer Anchor System for heavy-duty applications. It combines the HB-213 and H&B’s Heavy Duty 1/4” diameter details

Submittal Sheet (PDF)

Please contact your local H&B Representative for LEED information.

HW-340 Malleable Iron Wedge Inserts

HW-340 Malleable Iron Wedge Inserts are embedded into concrete slabs to allow for secure and adjustable attachment of materials to a concrete details

Submittal Sheet (PDF)
Askew Head Bolt (PDF)

Please contact your local H&B Representative for LEED information.

LIGHTNING-FLASH™ Wall Flashing

LIGHTNING-FLASH™ WALL FLASHING, made with 3M™ technology - is designed for use as a through-wall flashing and damp-proof course. Its details

Submittal Sheet (PDF)
LIGHTNING-FLASH Compatibility Chart (PDF)

Please contact your local H&B Representative for LEED information.

LIGHTNING-FLASH SDS

Liquid-Flash™

Liquid-Flash is formulated using a high performance silyl-terminated polyether polymer technology (STPE). It is a single component, moisture cure details

Submittal Sheet (PDF)

Please contact your local H&B Representative for LEED information.

Liquid-Flash™ SDS

LW-340 Malleable Iron Wedge Insert

LW-340 Long Wedge Insert is suitable for use at the bottom of the slab or when additional vertical adjustability is needed. Wedge inserts are details

Submittal Sheet (PDF)
Askew Head Bolt (PDF)

Please contact your local H&B Representative for LEED information.

MFL - Metal Flashing

MFL - Metal Flashing can be formed according to job requirements. State dimensions when ordering. Comes standard with factory formed, hemmed drip details

Submittal Sheet (PDF)

Please contact your local H&B Representative for LEED information.

MGS - Mortar/Grout Screen

Mortar/Grout Screen (MGS) is a 1/4" square monofilament screen fabricated from high-strength, non-corrosive polypropylene polymers which offers the details

Submittal Sheet (PDF)

Please contact your local H&B Representative for LEED information.

MGS - Mortar Grout Screen SDS

Mighty-Flash™ NA Residential

Mighty-Flash™ NA is an excellent for flashing pressure-treated and composite decks. Mighty-Flash™ NA, a stainless steel fabric flashing, details

Submittal Sheet (PDF)

CAD files are not available for this product.

Please contact your local H&B Representative for LEED information.

Mighty-Flash™ SA Residential

Mighty-Flash™ SA is an excellent for flashing pressure-treated and composite decks. A self-adhering stainless steel fabric flashing product details

Submittal Sheet (PDF)

Please contact your local H&B Representative for LEED information.

Mighty-Flash™ SA Self-Adhering SS Fabric Flashing

Mighty-Flash™ SA is a self-adhering stainless steel fabric flashing product with a proprietary clear adhesive. The adhesive is details

Submittal Sheet (PDF)

CAD files are not available for this product.

Please contact your local H&B Representative for LEED information.

Mighty-Flash™ Stainless Steel Fabric Flashing

Mighty-Flash™ is a stainless steel fabric flashing, a Class A material consisting of a layer of polymeric fabric with a single sheet of 304 details

Submittal Sheet (PDF)

CAD files are not available for this product.

Please contact your local H&B Representative for LEED information.

Mighty-Flash™ SDS

MIGHTY-LOK™ HOOK

The new Mighty-Lok™ HOOK, is a Heavy Duty 1/4” diameter compressed leg pintle that is flattened and serrated to fit a 3/8” mortar joint details

Go to the 170-ML or 270-ML information pages to download submittal sheets.

CAD files are not available for this product.

Please contact your local H&B Representative for LEED information.

Mortar Trap™

Mortar Trap™ is a mortar collection device manufactured from high-quality polypropylene strands woven into a 90% open mesh. When used with properly details

Submittal Sheet (PDF)

Please contact your local H&B Representative for LEED information.

Mortar Trap SDS

Mortar Trap™ Weep Vents

A 100% recycled polyester plastic non-woven mesh vent which is treated with a flame retardant and ultra-violet inhibitors. Used in vertical joints details

Submittal Sheet (PDF)

Please contact your local H&B Representative for LEED information.

Mortar Trap™ Weep Vents SDS

MR - Masonry Reglet

The MR - Masonry Reglet, made of rigid PVC, is embedded into the mortar joint of masonry backup to accept flashing. Built-in face plate keeps mortar details

Submittal Sheet (PDF)

Please contact your local H&B Representative for LEED information.

Seismiclip®, MR/CR Reglet & Slip-Set Stabilizer SDS

MWT - Mesh Wall Tie

Mesh Wall Tie (MWT) for bonding intersecting masonry walls Conforms to ASTM A 153 (Hot-dip Galvanized) Conforms to ASTM E 437, Type 304 (Stainless details

Submittal Sheet (PDF)

Please contact your local H&B Representative for LEED information.

NS - Closed Cell Neoprene Sponge

NS - Closed Cell Neoprene Sponge is placed horizontally beneath relieving angle, or in the vertical expansion joint to act as a control joint Also details

Submittal Sheet (PDF)

Please contact your local H&B Representative for LEED information.

Neoprene Sponge SDS

Panel-Lok®

PANEL-LOK® Mechanical Restraining Anchors for Re-Anchoring Stone Panel Veneers The Panel-Lok® panel re-anchoring system is an easy to use, details

Submittal Sheet (PDF)

CAD files are not available for this product.

Please contact your local H&B Representative for LEED information.

SDS Sheets are not available for this product
Contact Us to request information about this product.

Primer-SA Water-Based Primer for Self-Adhering Flashing

Hohmann & Barnard’s Primer-SA is a water based, modified polymer primer that can be used in a variety of self adhering flashing applications. details

Submittal Sheet (PDF)

CAD files are not available for this product.

Please contact your local H&B Representative for LEED information.

Self-Adhering Flashing Primer SDS

ProWall Tools

Visit prowall.h-b.com to start using this FREE and EXCLUSIVE SOFTWARE today! The Thermal Brick Support (TBS) System is now part of ProWall Tools! details

Submittal Sheet (PDF)

Please contact your local H&B Representative for LEED information.

PTA Series Anchors - PTA 310

PTA 310 Partition Top Anchors provide lateral shear resistance at the upper limit of masonry walls. They permit vertical deflection of the slab details

Submittal Sheet (PDF)

Please contact your local H&B Representative for LEED information.

PTA Series Anchors - PTA 310 HS

PTA 310 HS is a heavy-duty version of our PTA 310 Partition Top Anchors, developed to provide lateral shear resistance at the upper limit of masonry details

Submittal Sheet (PDF)

CAD files are not available for this product.

Please contact your local H&B Representative for LEED information.

PTA Series Anchors - PTA 364

PTA 364 Partition Top Anchors have been developed to provide lateral shear resistance at the upper limit of masonry walls. They permit vertical details

Submittal Sheet (PDF)

Please contact your local H&B Representative for LEED information.

PTA Series Anchors - PTA 420

The PTA 420 Partition Top Anchor has been developed to provide lateral shear resistance at the upper limit of masonry walls. They permit vertical details

Submittal Sheet (PDF)

Please contact your local H&B Representative for LEED information.

PTA Series Anchors - PTA 422

PTA 422 Partition Top Anchors have been developed to provide lateral shear resistance at the upper limit of masonry walls. They permit vertical details

Submittal Sheet (PDF)

Please contact your local H&B Representative for LEED information.

PTA Series Anchors - PTA RN (ROD & NUT)

PTA RN (ROD & NUT) Partition Top Anchors have been developed to provide lateral shear resistance at the upper limit of masonry walls. They details

Submittal Sheet (PDF)

Please contact your local H&B Representative for LEED information.

QV - Quadro-Vent™

QV - Quadro-Vent's honeycomb design allows passage of moisture from cavity to the building exterior while restricting ingress of insects and other details

Submittal Sheet (PDF)

Please contact your local H&B Representative for LEED information.

Quadro-Vent™ SDS

RB Rebar Positioners

RB Rebar Positioners position two rebar in center of block, the simple Z-shaped wire bridges the cell of the block while bends rest on the shell details

Submittal Sheet (PDF)

Please contact your local H&B Representative for LEED information.

RB-Twin Rebar Positioners

RB-Twin Rebar Positioners have double loops to hold four rebar in the center of the block, the simple Z-shaped wire bridges the cell of block while details

Submittal Sheet (PDF)

Please contact your local H&B Representative for LEED information.

RS Series - Rubber Control Joint

RS Series is a Rubber Control Joint designed for masonry walls at control joints Extruded rubber material Rubber material conforms to ASTM D-2000 details

Submittal Sheet (PDF)

Please contact your local H&B Representative for LEED information.

Rubber Control Joint SDS

Seismic Clip 300C w/HB-213

The 300C is a seismic clip welded to a hook (pintle) and designed for use with the HB-213 adjustable veneer anchor. That features a L-shaped plate details

Submittal Sheet (PDF)

CAD files are not available for this product.

Please contact your local H&B Representative for LEED information.

Seismic Hook

Hohmann & Barnard's SH-Seismic Hook: This hook is "swaged" (indented) in two places to accommodate either a 9 gauge or 3/16" continuous wire A details

Submittal Sheet (PDF)

CAD files are not available for this product.

Please contact your local H&B Representative for LEED information.

Seismic Plate Pintle HB-213S w/HB-213 (T-LOK TIE™)

The HB-213 w/HB-213S, formerly known as T-LOK TIE™ is an adjustable veneer anchor assembly with a heavy-duty plate pintle that features a details

Submittal Sheet (PDF)

CAD files are not available for this product.

Please contact your local H&B Representative for LEED information.

Seismiclip® Interlock System (S.I.S.) - Seismic Clip

The Seismiclip® (S.I.S.) seismic clip will accept standard H&B Wire Ties and Continuous Wire. Horizontal Joint Reinforcement Wire and Masonry details

Submittal Sheet (PDF)

CAD files are not available for this product.

Please contact your local H&B Representative for LEED information.

Sharktooth Insert

H&B Sharktooth Insert has various applications and is capable of developing working loads up to 8,000#/ft. in both shear and tension. It is details

Submittal Sheet (PDF)

CAD files are not available for this product.

Please contact your local H&B Representative for LEED information.

Slip-Set™ Stabilizer

The Slip-Set™ Stabilizer bonds masonry walls and restrains lateral (shear) movements while allowing expansion and control joints to perform as details

Submittal Sheet (PDF)

Please contact your local H&B Representative for LEED information.

Spira-Lok®

Spira-Lok® is the Original Helical Wall Tie System A one-piece, flexible stainless steel wall tie for pinning masonry to new or existing walls. details

Submittal Sheet (PDF)
Spira-Lok Brochure (PDF)

CAD files are not available for this product.

Please contact your local H&B Representative for LEED information.

SDS Sheets are not available for this product
Contact Us to request information about this product.

SPYRA-LOX® Rebar Lap-Joint Tie

SPYRA-LOX® Rebar Lap-Joint Tie eliminates cumbersome procedure of tying lap-joined rebars together in reinforced walls. Increases worker details

Submittal Sheet (PDF)

Please contact your local H&B Representative for LEED information.

Mill Galv. Steel Wire SDS

Stone Anchors

For more than 75 years, Hohmann & Barnard, Inc. has specialized in the design and manufacture of stone anchoring systems. In addition to designing details

Go to the Stone Anchor page and click on stone anchor images, names, or numbers to download editable submittal sheets (pdf).

CAD files are not available for this product.

Please contact your local H&B Representative for LEED information.

Stone Anchors (2-SEAL™)

H&B is now offering stone anchor systems that incorporate the popular 2-SEAL™ and 2-SEAL™ THERMAL WING NUT anchors. Click on anchor details

Submittal Sheet (PDF)

Please contact your local H&B Representative for LEED information.

T1 - Termination Bar

T1 - Termination Bar is used at top of flashing to secure it to backup and is compatible with all H&B membrane and copper/stainless steel composite details

Submittal Sheet (PDF)

Please contact your local H&B Representative for LEED information.

T2 - Aluminum Termination Bar

T2 - Aluminum Termination Bar, which has a 1/4” flange on top for easy caulking, is used at the top of flashing to secure it to backup. Compatible details

Submittal Sheet (PDF)

CAD files are not available for this product.

Please contact your local H&B Representative for LEED information.

Aluminum SDS

T2 - Termination Bar

T2 - Termination Bar, which has a 3/8” flange on top for easy caulking, is used at top of flashing to secure it to backup. Compatible with all H&B details

Submittal Sheet (PDF)

Please contact your local H&B Representative for LEED information.

Stainless Steel SDS

TBS-Thermal Brick System

REDUCE THERMAL TRANSFER! The TBS Thermal Brick Support from HOHMANN & BARNARD is a groundbreaking brick veneer support system that reduces details

CAD files are not available for this product.

Please contact your local H&B Representative for LEED information.

TEXTROFLASH™ Residential Flashing

H&B's Textroflash™ Flashing is a thru-wall flashing/surface-mounted flashing is an excellent choice for your next residential project. details

Submittal Sheet (PDF)

CAD files are not available for this product.

Please contact your local H&B Representative for LEED information.

TeXtroflash™ Flashing

H&B's Textroflash™ Flashing a thru-wall flashing/surface-mounted flashing is a 40-mil thick composite membrane with a new, proprietary adhesive details

Submittal Sheet (PDF)

Textroflash™ Flashing Installation Sheet

Please contact your local H&B Representative for LEED information.

Thermal 2-Seal™ Tie

The THERMAL 2-SEAL™ TIE is an innovative single screw veneer tie for metal stud construction Fabricated from stainless steel and COATED with a details