Home>By Category>Masonry Anchor & Support Systems>Partition Top Anchors>PTA Series Anchors - PTA 422
PTA SERIES ANCHORS - PTA 422
Click on the text link below to download
Submital SheetsPDF Downloads
Click on the text link below to download
Safety Data SheetsPDF Downloads
Click on the text link below to download
LEEDPDF Downloads
PTA 422 Partition Top Anchors have been developed to provide lateral shear resistance at the upper limit of masonry walls.
- They permit vertical deflection of the slab above, without transferring compressive loads to the masonry wall below.
- PTA Tube is not required with the PTA-422. H&B's NS Neoprene Sponge placed between the concrete block and the PTA-422 allows vertical expansion and contraction.
- PTA Series Anchorsare suitable for construction using steel or concrete.
DIMENSIONS/GAUGES:
- 12 ga. thick
- Available for 4”-12” block
- Holes 7/16" dia.
NOTE:
- Special high-load designs can be manufactured on a special order basis contact our technical department for information.
Hole Diameter | |||||
---|---|---|---|---|---|
7/16"Ø | Lengths | ||||
8" | CUSTOM | Thickness/Gauge | |||
12 gauge | CUSTOM | Block Size | |||
4" | 6" | 8" | 10" | 12" | CUSTOM | Finishes/Materials |
Mill Galvanized | Hot-Dip Galvanized | Type 304 - Stainless Steel | Type 316 - Stainless Steel (Special Order) | Bend Length | |
2" (Standard) | CUSTOM |