Displaying 1 to 48 (of 60 products)
PTA 310 Partition Top Anchors provide lateral shear resistance at the upper limit of masonry walls. They permit vertical deflection of the slab...
PTA 310 HS is a heavy-duty version of our PTA 310 Partition Top Anchors, developed to provide lateral shear resistance at the upper limit of masonry...
PTA 364 Partition Top Anchors have been developed to provide lateral shear resistance at the upper limit of masonry walls. They permit vertical...
The PTA 420 Partition Top Anchor has been developed to provide lateral shear resistance at the upper limit of masonry walls. They permit vertical...
PTA 422 Partition Top Anchors have been developed to provide lateral shear resistance at the upper limit of masonry walls. They permit vertical...
PTA RN (ROD & NUT) Partition Top Anchors have been developed to provide lateral shear resistance at the upper limit of masonry walls. They...
For more than 75 years, Hohmann & Barnard, Inc. has specialized in the design and manufacture of stone anchoring systems. In addition to designing...
H&B is now offering stone anchor systems that incorporate the popular 2-SEAL™ and 2-SEAL™ THERMAL WING NUT anchors. Click on anchor...
The 2-SEAL™ TIE is an innovative single screw veneer tie for metal stud construction Fabricated from carbon steel with a premium quality...
Hohmann & Barnard's 280-BL Dub'l Loop-Lok™; Reinforcement combines the features of 280 Dub'l Loop-Lok™ reinforcement with the benefits of the...
303 SV - Seismic-Notch Dovetail Anchor is modified to comply with seismic codes, which call for continuous wire in the veneer to be an integral...
For use with #305 Dovetail Slot or anchored directly to backup (NOTE:structural adequacy must be verified by project engineer before surface...
The 315-BL Byna-Lok is fitted with a dovetail head to fit 305 Dovetail Slot. New masonry veneer is anchored to studs, existing masonry, concrete or...
The 315-BT is fitted with a Vee Byna- Tie®for use with the Seismiclip® Interlock System. For use with 305 Dovetail Slot. Horizontal joint...
The 344 - Rigid Partition Anchor is for anchoring load bearing walls at intersections AVAILABLE FINISHES: Plain Steel Hot Dip Galv. Stainless Steel ...
The 345-BL is comprised of a Byna-Lok™ Wire Tie with a wrap-around metal strap New masonry veneer can be anchored to studs, existing masonry,...
The 345-BT with S.I.S., for tying masonry to concrete or CMU backup with a flexible (not rigid) connection, is comprised of a Vee Byna- Tie®...
345-SV - Seismic-Notch Veneer Anchor is modified to comply with seismic codes, which call for continuous wire in the veneer to be an integral...
The 351 - Wire Column Tie is for anchoring masonry to structural column when masonry is parallel to column flange. DIMENSIONS/GAUGES: 3/16" or 1/4"...
The 352 - Wire Column Tie is for anchoring masonry to structural columns when masonry is perpendicular to column flange DIMENSIONS/GAUGES: 3/16" or...
The 353 - Column Anchor is for anchoring block or brick to structural columns when masonry is perpendicular to the column flange DIMENSIONS/GAUGES:...
The 353L - Column Anchor anchors masonry to the building frame while restraining both positive and negative wind load actions, it has a slotted hole...
The 354 - Notched Column Anchor (Corrugated Type) is for anchoring masonry to structural columns when masonry is parallel to the column flange...
The 355 Column Anchor is for anchoring masonry to structural columns when masonry is parallel to the column flange DIMENSIONS/GAUGES: 1/4" thick x 1...
The 355L - Column Anchor anchors masonry to the building frame while restraining both positive and negative wind load actions, it has a slotted hole...
The 356 Column Anchor is for anchoring masonry to structural column when masonry is parallel to column web The 356L has a slotted hole to accept...
The 357 - Beam Anchor is for anchoring masonry to structural beams DIMENSIONS/GAUGES: Standard size is 1 1/4" wide x 12 ga. thick x 12" long ...
359 Weld-on Ties are used in conjunction with the Vee-Byna Tie® or the 301W Column Web Tie The systems anchor masonry to the structural frame,...
359-C - Weld-on Ties are used in conjunction with the Vee-Byna Tie® or the 301W Column Web Tie The systems anchor masonry to the structural...
359-FH - Weld-on Ties are used in conjunction with the Vee-Byna Tie® or the 302W Column Web Tie The systems anchor masonry to the structural...
359FP - Weld-On Ties are for use when there is a requirement for spray-on fireproofing Exaggerated offset dimension 'L' (specify when ordering)...
359FP-C - Weld-on Ties are for use when there is a requirement for spray-on fireproofing Exaggerated offset dimension 'L' (specify when ordering)...
The 360 Gripstay™ Channel Slot is welded onto steel web or flange and accepts any type of Gripstay Anchor DIMENSIONS/GAUGES: 7-1/2" long...
The 361 - Gripstay™ Channel Slot is furnished with welded straps on top and bottom for embedment into a CMU backup. Accepts any Gripstay™...
The 362 - Gripstay™ Channel Slot is furnished with integrally formed end tabs for attachment to masonry. Accepts any Gripstay™ Anchor for...
The 362-C - Gripstay™ Channel Slot is a continuous Gripstay™ channel and accepts any Gripstay™ Anchor for masonry or stone...
The 362-CX Gripstay™ Channel is for use on backup block with insulation. Factory-welded prongs bridge the insulation and abut the concrete...
The 363 - Flexible Gripstay™ Channel Anchor Head permits horizontal and vertical movement of the masonry wall while restraining the wall from...
The 363-BL is comprised of a Byna-Lok™ Wire Tie fitted with a 363 Gripstay™ head to fit any style Gripstay™ Channel Slot. The...
The 363-BT is comprised of a Vee Byna- Tie® fitted with a Gripstay head to fit any style Gripstay Channel. (360, 361, 362, 362-C, 362-CX) 363-BT...
364 SV - Seismic-Notch Gripstay™ Channel Slot Anchor is modified to comply with seismic codes, which call for continuous wire in the veneer to...
The 365 Bent Gripstay™ Channel Slot anchor ties masonry to steel columns, concrete or existing walls The 365 has standard 1" bend. Longer...
BL-407 is a wire tie and plate combination system that provides adjustability, strength, stiffness, positive connection, corrosion resistance, and is...
New masonry veneer can be anchored to studs, existing masonry, concrete or steel with the Byna-Lok Wire Tie. Various H&B Anchor systems can be fitted...
The DW-10HS® with Byna-Lok® is a seismic veneer anchoring system comprised of the high strength brick veneer anchor, DW-10HS®, combined with the...
The DW-10HS® Seismiclip® Interlock System is a seismic veneer anchoring system comprised of a high strength brick veneer anchor, DW-10HS™,...
DW-10HS® is for anchoring brick veneer to metal stud, masonry, concrete or wood backup. (We carry a wide variety of screws for various types of...
DW-10® is for anchoring brick veneer to metal stud, masonry, concrete or wood backup. (We carry a wide variety of screws for various types of...
Displaying 1 to 48 (of 60 products)
