Our Brands

Products

Customer Service

Toll Free

Telephone

Contact Us

Repair & Restoration Anchors

Repair & Restore Veneers

[PDF][PART-1] Submittal Short Description

[PDF][PART-2] Submittal Short Description

[PDF][PART-3] Submittal Short Description

[PDF][PART-4] Submittal Short Description

[PDF] Material Conformance - Text

[ASSET][SUBMITTAL] Submittal 1

[ASSET][SUBMITTAL] Submittal 2

[ASSET][SDS] Safety Data Sheet (SDS) 1

[ASSET][SDS] Safety Data Sheet (SDS) 2

SKU Number

The Panel-Lok® panel re-anchoring system is an easy to use, mechanically-activated, economical method to re-anchor existing stone panel veneers to concrete, solid and/or hollow masonry, and steel substrates. The process eliminates the need to remove existing stone by providing a corrosion-resistant tie assembly.&nbsp;The components are manufactured of AISI Type 300 series austenitic stainless steel and ASTM Type 360 brass. The combination provides for long-term durability and structural stability for the design life of the structure.&nbsp;The Panel-Lok® component systems consist of mechanically-activated expansion elements that are situated in the back-up material. They are either torque activated or hammer set which provides a method of inspection for the backup connection. The backup anchorage system and the veneer connection method develop performance characteristics similar to the original stone anchoring requirements. The expanders are integrated with a stainless steel shaft and various hex or screw attached heads for the stone veneer connection.&nbsp;The anchors can be field tested by either direct tension or torque after installation. The Panel-Lok® anchors are manufactured of applicable ASTM materials. They are available in a variety of lengths, and can be made to special lengths and materials upon request.<h4>Basic Applications</h4>Use where there is a need to re-attach existing stone panel veneers less than three inches thick that require additional restraint or support to resist live and dead loads. These Panel-Lok anchors accommodate bilateral live-load resistance, uni-directional forces, support loading, and combinations of all types. The backup anchorage system may dictate the style of anchorage required.<ul><li>600 Series Anchor - Uni-directional loading to restrain stone panel to solid backup</li><li>600-TGL Series Anchor - Bilateral loading to restrain stone panel to solid backup</li><li>T Series Anchor - Torque activated, support and restrain stone panel to solid backup with or without cavity</li><li>610 Series Anchor - Restrain stone panel to hollow and solid backup</li><li>610-S-TGL Series Anchor - Bilateral loading to restrain soft-stone panel to steel backup</li></ul>

Panel-Lok® Mechanical Restraining Anchors for Re-Anchoring Stone Panel Veneers

The Panel-Lok® panel re-anchoring system is an easy to use, mechanically-activated, economical method to re-anchor...

[PICKLIST] Finishes/Materials

[SM][PICKLIST] Backup Type

[BOOLEAN] Helical Tie

[BOOLEAN] Ladder Type Masonry Joint Reinforcement

[BOOLEAN] Repairs Existing Veneer

[BOOLEAN] Truss Type Masonry Joint Reinforcement

[PDF] Assembly Image 2

[PICKLIST] Diameter

Spira-Lok® is the Original Helical Wall Tie SystemA one-piece, flexible stainless steel wall tie for pinning masonry to new or existing walls. Also suitable for temporary support for lintel and shelf angle replacement. The dry-set technique may involve various tie diameters, drill bits and installation tools.Features:<ul><li>Only a small diameter pilot hole required.</li><li>No toxic adhesives or expansion devices.</li><li>Site-tested immediately after installation.</li><li>Functional in a wide variety of building materials.</li><li>Able to withstand cyclic loading.</li><li>Accommodates differential movements between materials.</li><li>Does not stress or fracture fragile substrates.</li></ul>DIMENSIONS:<ul><li>Available in 8 mm or 10 mm diameter x 6-1/8" (155 mm) to 24" (600 mm) long.</li></ul>AVAILABLE FINISHES:<ul><li>Stainless Steel Type 304</li><li>316 available by special order</li></ul>NOTE:<ul><li>An on-site survey should be carried out prior to project tendering to determine material strength, tie diameter &amp; length, pilot hole size and appropriate drilling technique.</li></ul>

Spira-Lok® Helical Wall Tie System

Spira-Lok® is the Original Helical Wall Tie SystemA one-piece, flexible stainless steel wall tie for pinning masonry to...

[ASSET][SUBMITTAL] Submittal 3

[ASSET][SUBMITTAL] Submittal 4

[ASSET][SUBMITTAL] Submittal 5

The Torq-Lok® mechanical anchoring system is an easy to use and cost effective method to re-connect existing veneers to various substrates. The process eliminates the need to tear down an existing veneer by providing a corrosion resistant tie assembly. &nbsp;The components are manufactured of AISI Type 300 series austenitic stainless and ASTM Type 360 brass. The combination provides for long-term durability and structural stability for the design life of the structure. &nbsp;The 500 and 510 Series system consists of brass expansion elements that are situated in the veneer and backup segments of the wall system being rehabilitated. They are torque activated which provides a method of inspection for both the façade and backup connection. The two independent expanders are connected via a stainless steel shaft and hardware.&nbsp;The 520 and 530 Series System utilizes the brass expander as a connection means for the outer wythe. The backup has either a lag thread or self-drilling/self-tapping screw on a stainless steel shaft. The installation accuracy can be inspected via torque for both connectors in the two wythes. &nbsp;Once installed, the anchors resist veneer loading in both compression and tension. The design of the system provides two independently activated expanders that do not create tension between wythes. Basically, the Torq-Lok system replicates a wall tie’s performance. That is, live loads on the veneer are transferred to the backup thereby stiffening the veneer and minimizing crack potential. All Torq-Lok anchors are installed at “T” joint or bed joint locations, concealed with a mortar patch or sealant, and have no exposed hardware. &nbsp;The Torq-Lok anchors are manufactured of applicable ASTM materials. They are available in a variety of lengths, and can be made to special lengths upon request.Basic ApplicationsUse where facades have missing or corroded wall ties or anchors. Can be applied at peripheral areas that are bulging or around areas that are to be removed. Use as a replacement tie for broken or cracked headers in composite walls. Use in high stress areas, which require load resistance greater than provided by typical wall ties. Torq-Lok can also be applied or modified to reattach thin clad stone to various backup materials.<ul><li>500 SERIES ANCHOR - Solid Backup</li><li>510 SERIES ANCHOR - Hollow Backup</li><li>520 SERIES ANCHOR - Metal Stud Backup</li><li>530 SERIES ANCHOR - Metal or Wood Stud Backup</li></ul>

Torq-Lok® Torque-Activated Mechanical Restraining Anchors

The Torq-Lok® mechanical anchoring system is an easy to use and cost effective method to re-connect existing veneers to...

Submittal

LEED Downloads

All H&B product documentation available for download on one page.

Downloads