Our Brands

Products

Customer Service

Toll Free

Telephone

Contact Us

Partition Top Anchors

Top of Wall Anchors - PTA

Thickness/Gauge

1/4" (HEAVY-DUTY)

12 gauge

3/16"

CUSTOM

Lengths

Hole Diameter

5/16"Ø

7/16"Ø

Block Size

SKU Number

[PICKLIST] Thickness/Gauge

[PICKLIST] Rod Diameter

[REQUIRED][ACCESSORIES] Required Accessories Standard

[ASSET][SUBMITTAL] Submittal 1

[ASSET][SDS] Safety Data Sheet (SDS) 1

[ASSET][SDS] Safety Data Sheet (SDS) 2

[ASSET][SDS] Safety Data Sheet (SDS) 3

[ASSET][SDS] Safety Data Sheet (SDS) 4

[PICKLIST] Finishes/Materials

[SM][BOOLEAN] Anchor for Top of Wall

[SM][PICKLIST] Concrete/Slab Above

[SM][PICKLIST] Steel Beam Above

[PDF][PART-1] Material Conformance - Text

[PDF][PART-2] Material Conformance - Text

[PDF][PART-3] Material Conformance - Text

[PDF][PART-4] Material Conformance - Text

[PDF][PART-5] Material Conformance - Text

[PDF][PART-6] Material Conformance - Text

[PDF][PART-7] Material Conformance - Text

[PDF][PART-1] Submittal Short Description

[PDF][PART-2] Submittal Short Description

[PDF][PART-3] Submittal Short Description

[PDF][PART-4] Submittal Short Description

[OPTIONAL][ACCESSORIES] Optional Accessories

[PDF] Assembly Image 2

[PDF] Submittal Notes

PTA 310 HS is a heavy-duty version of our <a href="https://www.h-b.com/index.php?main_page=product_info&amp;cPath=93_76_12&amp;products_id=115">PTA 310 Partition Top Anchors</a>, developed to provide lateral shear resistance at the upper limit of masonry walls. They permit vertical deflection of the slab above, without transferring compressive loads to the masonry wall below.<ul><li>For use on concrete construction.</li><li>PTA 310 HS must be used in conjunction with <a href="https://www.h-b.com/index.php?main_page=product_info&amp;cPath=70_76_9&amp;products_id=6">305 Dovetail Slot</a> and PTA tubes.</li><li>PTA Tube with expansion filler is placed over rod anchor, which has been attached to concrete by the methods illustrated. The vertical joint is then filled with mortar, fully surrounding tube.</li><li>Clear butyrate tubes with compressible polyethylene filler isolate the anchor from the surrounding mortar, allowing the anchor to slide vertically.</li></ul>DIMENSIONS/GAUGES:<ul><li>5/8" rod</li><li>Dovetail head is 1/4" thick</li><li>Contact our technical department for further information</li></ul>AVAILABLE FINISHES:<ul><li>Hot Dip Galvanized</li><li>Stainless Steel</li></ul>NOTE:<ul><li>Important: We are not responsible for incompatibility if ties or slots are interchanged with those of other manufacturers.</li><li>Special high-load designs can be manufactured on a special order basis contact our technical department for information.</li></ul>

PTA Series Anchors - PTA 310 HS

PTA 310 HS is a heavy-duty version of our PTA 310 Partition Top Anchors, developed to provide lateral shear resistance...

[PICKLIST] Hole Diameter

[ACCESSORIES] Recommended Accessories

[ASSET][LEED] LEED

The PTA 420 Partition Top Anchor has been developed to provide lateral shear resistance at the upper limit of masonry walls.<ul><li>They permit vertical deflection of the slab above, without transferring compressive loads to the masonry wall below.</li><li>PTA Tube with expansion filler is placed over rod (#3 rebar) anchor, which has been attached to concrete or steel by any of the methods illustrated.</li><li>The vertical joint is then filled with mortar, fully surrounding tube.</li><li><a href="https://www.h-b.com/images/large/1productimg/PTA-420-TUBE_LRG.jpg">Clear butyrate tubes</a> with compressible polyethylene filler isolate the anchor from the surrounding mortar, allowing the anchor to slide vertically.</li><li><a href="https://www.h-b.com/index.php?main_page=index&amp;cPath=70_76_12">PTA Series Anchors</a> are suitable for construction using steel or concrete.</li></ul>DIMENSIONS/GAUGES:<ul><li>Rod is #3 rebar</li><li>Straps are 3/16" plate</li><li>Other diameters and gauges available, including heavy-duty styles for hurricane velocity wind loads</li><li>Contact our technical department for further information.</li></ul>AVAILABLE FINISHES:<ul><li>Hot Dip Galvanized</li><li>Stainless Steel</li></ul>NOTE:<ul><li>Special high-load designs can be manufactured on a special order basis contact our technical department for information.</li></ul>

PTA Series Anchors - PTA 420 HS

The PTA 420 Partition Top Anchor has been developed to provide lateral shear resistance at the upper limit of masonry...

[PICKLIST] Lengths

[PICKLIST] Block Size

[PICKLIST] Bend Length

PTA 422 Partition Top Anchors have been developed to provide lateral shear resistance at the upper limit of masonry walls.<ul><li>They permit vertical deflection of the slab above, without transferring compressive loads to the masonry wall below.</li><li>PTA Tube is not required with the PTA-422. H&amp;B's <a href="https://www.h-b.com/index.php?main_page=product_info&amp;cPath=16&amp;products_id=57">NS Neoprene Sponge</a> placed between the concrete block and the PTA-422 allows vertical expansion and contraction.</li><li><a href="https://www.h-b.com/index.php?main_page=index&amp;cPath=70_76_12">PTA Series Anchors</a>are suitable for construction using steel or concrete.</li></ul>DIMENSIONS/GAUGES:<ul><li>12 ga. thick</li><li>Available for 4”-12” block</li><li>Holes 7/16" dia.</li></ul>NOTE:<ul><li>Special high-load designs can be manufactured on a special order basis contact our technical department for information.</li></ul>

PTA Series Anchors - PTA 422

PTA 422 Partition Top Anchors have been developed to provide lateral shear resistance at the upper limit of masonry...

Submittal

LEED Downloads

All H&B product documentation available for download on one page.

Downloads