Our Brands

Products

Customer Service

Toll Free

Telephone

Contact Us

Moisture Control

Sealants, Tapes & Primers

SKU Number

[SM][BOOLEAN] Self-Adhering Membrane

[BOOLEAN] For Use with ENVIRO-BARRIER™ and ENVIRO-BARRIER™ VP

[BOOLEAN] For Use with Self-Adhering Flashing

[PICKLIST] Packaging/Sizes

[ASSET][SUBMITTAL] Submittal 1

[ASSET][SDS] Safety Data Sheet (SDS) 1

[SELLS_WITH][ACCESSORIES] Sells With

[PDF][PART-1] Submittal Short Description

[PDF][PART-2] Submittal Short Description

[ASSET][LEED] LEED

HB SEALANT is a multi-purpose, resilient joint sealant that combines economy and high performance. It is ideal for a wide range of applications where joint movement requires compression and extension in excess of 25%.The HB Sealant is an accessory to H&amp;B's non-asphaltic flashing lines. It is used primarily for lapping and sealing flashings, drip edges, terminations, and end dams, particularly in areas where moisture is likely to be a factor.Because HB SEALANT is a moisture-curing polyether sealant, it is effective in damp, dry or cold climates and is free of solvents and isocyanates. It will not shrink upon curing, bubble on damp surfaces as polyurethanes sealants often do, or discolor when exposed to UV light.HB SEALANT has excellent elastomeric properties and adheres to most construction materials including difficult surfaces such as anodized metals and coatings. HB SEALANT is effective in many difficult construction site conditions: It can be applied to damp surfaces at temperatures as low as 32°F (0°C)

HB Sealant

HB SEALANT is a multi-purpose, resilient joint sealant that combines economy and high performance. It is ideal for a...

Liquid-Flash is formulated using a high performance silyl-terminated polyether polymer technology (STPE). It is a single component, moisture cure elastomeric waterproofing membrane that is applied and tooled to create a long-term moisture proof barrier. Liquid-Flash shows excellent resistance to UV degradation and extreme environmental conditions. Can be applied to damp or wet substrates without outgassing or “bubbling”. Safe to apply in wet conditions when rain is imminent as it will not wash off like other sealants. Because Liquid-Flash is 100% solids it will not shrink or crack. It is compatible with most common building materials, including concrete, plywood, concrete masonry, brick, gypsum sheathing, wood and cement based sheathings.PACKAGING: Liquid-Flash™ is available in 20 oz. sausagesAPPLICATIONS:<ul><li>Window &amp; Door Flashing</li><li>Sheathing Joint Sealant</li><li>Membrane Termination Sealant</li><li>Joint Sealant</li><li>Air Barrier Transitions</li></ul>FEATURES &amp; BENEFITS:<ul><li>Bonds To Wet Substrates</li><li>100% Solids, Will Not Shrink or Crack</li><li>Resistant to UV Degradation &amp; Weathering</li><li>Excellent, Broad Adhesion Range</li><li>Water Resistant Prior To Cure, Will Not Outgas Or Wash off</li><li>Excellent Physical Properties Prevents Moisture Transmission</li><li>VOC Compliant:<ul><li>Contains No Solvents, Phalates or Isocyanates</li><li>VOC Compliant (17 grams/liter ASTM D2369)</li></ul></li><li>Excellent Unprimed Adhesion To Various Substrates</li><li>Breathable, Allows Damp Surfaces To Dry</li><li>Excellent Perm Rating</li><li>Low Odor, Eco-Friendly Formulation</li><li>Fills Joints &amp; Voids 4. Regulatory Compliance</li><li>Conforms to California Proposition 65</li><li>Conforms to USDA Requirements For Non-Food Contact</li><li>Meets Requirements of CARB &amp; SCAQMD</li></ul>

LIQUID-FLASH™ Liquid Detailing Membrane

Liquid-Flash is formulated using a high performance silyl-terminated polyether polymer technology (STPE). It 

Hohmann &amp; Barnard’s Primer-SA is a water based, modified polymer primer that can be used in a variety of self adhering flashing applications.<ul><li>Primer must be applied to a surface that is free from all foreign matter.</li><li>This material can be applied by brush, squeegee, or spray equipment. Coverage rate of primer is approximately 350 sq ft/gallon on exterior sheathing panels and 250 sq ft/gallon on CMU, concrete and more porous surfaces.</li><li>Primer should dry for approximately 20-30 minutes or dry to the touch before applying the self adhering flashing.</li></ul>PACKING INFORMATION:<ul><li>Furnished in 5 gallon pails</li></ul>

PRIMER-SA Water-Based Primer for Self-Adhering Flashing

Hohmann &amp; Barnard’s Primer-SA is a water based, modified polymer primer that can be used in a variety of self...

Submittal

LEED Downloads

All H&B product documentation available for download on one page.