All Products

This page provides a list of all Hohmann & Barnard Products ordered alphabetically; our products are also organized in this site's main navigation bar (which feature convenient pull down menus) by Category, Application, and Trademark. A Sitemap is also available to assist in navigating this website.





120 Truss-Mesh
120 Truss-Mesh

120 Truss-Mesh is a truss type continuous length joint reinforcement for single wythe walls. Hohmann & Barnard's Lox All® Truss-Mesh and Lox ... more info


125 Cavity Truss-Mesh
125 Cavity Truss-Mesh

125 adds a cavity drip to the 120 Truss-Mesh Hohmann & Barnard's Lox All® Truss-Mesh and Lox All® Ladder-Mesh are continuous lengths of joint ... more info


130 Truss-Tri-Mesh
130 Truss-Tri-Mesh

130 Truss-Tri-Mesh has three longitudinal (side) rods to reinforce block and brick composite walls Hohmann & Barnard's Lox All® Truss-Mesh and Lox ... more info


140 Truss Twin-Mesh
140 Truss Twin-Mesh

140 Truss Twin-Mesh has 4 Longitudinal (Side) Rods to reinforce block-and-brick or block-and-block composite walls (block-and-block product and ... more info


150 Truss Box-Mesh
150 Truss Box-Mesh

150 Truss Box-Mesh for block-and-brick composite walls. Welded boxes project from backup Truss Reinforcement and tie into brick face Hohmann & ... more info


155 Cavity Truss Box-Mesh
155 Cavity Truss Box-Mesh

155 Cavity Truss Box-Mesh adds a cavity drip to 150 Truss Box-Mesh. Hohmann & Barnard's Lox-All® Truss-Mesh and Lox-All® Ladder-Mesh are continuous ... more info


165 Adjustable Truss
165 Adjustable Truss

165 Lox-All® Truss Style Adjustable Joint Reinforcement has "winged loops" welded to the back-up reinforcing. The loops accept pintles to allow ... more info


165 Adjustable Truss Seismiclip® Interlock System
165 Adjustable Truss Seismiclip® Interlock System

165 S.I.S. Truss Seismiclip® Interlock System features Lox-All® Truss Style Adjustable Joint Reinforcement (with Winged Loops and Pintles) ... more info


170 Adjustable Truss Eye-Wire
170 Adjustable Truss Eye-Wire

170-2X Lox-All® Truss Style Adjustable Joint Reinforcement with Eyes and the NEW 2X-Hook for cavity/insulated walls. The embedded portion of the ... more info


170 Adjustable Truss Eye-Wire w/Seismic Hook
170 Adjustable Truss Eye-Wire w/Seismic Hook

170 Lox-All® Truss Style Adjustable Joint Reinforcement with Eyelets for vertical adjustability and the H&B Seismic Hook for continuous wire. H&B ... more info


170 Adjustable Truss Lox-All Eye-Wire w/S.I.S.
170 Adjustable Truss Lox-All Eye-Wire w/S.I.S.

170 Lox-All Truss Adjustable Eye-Wire w/S.I.S. is a truss style adjustable joint reinforcement with eyes and pintles combined with the ... more info


170-ML Truss Adjustable Eye-Wire
170-ML Truss Adjustable Eye-Wire

170-ML Truss Adjustable Eye-Wire Joint Reinforcement features super-heavy-duty eyelets and pintles for superior strength and performance. This is ... more info


170-ML Truss Adjustable Eye-Wire w/S.I.S.
170-ML Truss Adjustable Eye-Wire w/S.I.S.

170-ML Truss Adjustable Eye-Wire w/S.I.S. combines the beneficial features of the 170 Mighty-Lok™ adjustable truss joint reinforcement with the ... more info


180 Dub'l Loop-Lok™ Truss
180 Dub'l Loop-Lok™ Truss

180 Dub'l Loop-Lok™ Truss allows in-plane vertical and horizontal movement of masonry wythes while restraining tension and compression. Loops ... more info


180 S.I.S. Dub'l Loop-Lok™ Seismiclip® Interlock System
180 S.I.S. Dub'l Loop-Lok™ Seismiclip® Interlock System

The 180 S.I.S. Dub'l Loop-Lok™ combines the Seismiclip® Interlock System with the standard Lox-All® 180 Dub'l Loop-Lok. This allows ... more info


180-BL Dub'l Loop-Lok™ with Byna-Lok™ Wire Tie
180-BL Dub'l Loop-Lok™ with Byna-Lok™ Wire Tie

180-BL Dub'l Loop-Lok™ with Byna-Lok™ Wire Tie combines the features of Hohmann & Barnard's 180 Lox-All® Dub'l Loop-Lok™ Adjustable Truss ... more info


185 Grip-Lok™ Truss
185 Grip-Lok™ Truss

185 Grip-Lok™ Truss combines Lox-All® 180 Dub'l Loop-Lok Truss Reinforcement with the interlocking heavy-duty Grip-Lok™ Plate, the plate accepts a ... more info


2-Seal™ Concrete Seal Tie
2-Seal™ Concrete Seal Tie

The Concrete Seal Tie ties the masonry veneer to the substrate. The #14 diameter screw portion has special alternating threads making it suitable for ... more info


2-Seal™ Tie
2-Seal™ Tie

The 2-SEAL™ TIE is an innovative single screw veneer tie for metal stud construction Fabricated from carbon steel with a premium quality ... more info


2-Seal™ Thermal Concrete Wing Nut Anchor
2-Seal™ Thermal Concrete Wing Nut Anchor

The Thermal Concrete 2-Seal™ Wing Nut is an innovative single screw veneer tie for concrete, CMU, or wood stud construction. The anchor features a ... more info


2-Seal™ Thermal Wing Nut Anchor
2-Seal™ Thermal Wing Nut Anchor

The Thermal 2-Seal™ Wing Nut Anchor is an innovative single screw veneer tie for metal stud construction, it features a dual-diameter barrel with ... more info


220 Glass Block Reinforcement
220 Glass Block Reinforcement

220 Glass Block reinforcement is continuous lengths of joint reinforcement that is embedded into the horizontal mortar joints of glass block wall ... more info


220 Ladder Mesh Reinforcement
220 Ladder Mesh Reinforcement

220 Ladder Mesh Reinforcement's cross rods are spaced so block cells are not obstructed, allowing easy placement of vertical rebars A full 8" splice ... more info


225 Cavity Ladder-Mesh
225 Cavity Ladder-Mesh

225 Cavity Ladder-Mesh adds a cavity drip to product #220 adds a cavity drip to product 220 Ladder Mesh Reinforcement Hohmann & Barnard's Lox All® ... more info


230 Ladder Tri-Mesh
230 Ladder Tri-Mesh

230 Ladder Tri-Mesh has 3 Longitudinal (Side) Rods to reinforce block and brick composite walls Hohmann & Barnard's Lox All® Truss-Mesh and Lox All® ... more info


240 Ladder-Twin-Mesh
240 Ladder-Twin-Mesh

The 240 Ladder-Twin-Mesh has 4 Longitudinal (Side) Rods to reinforce block-and-brick or block-and-block composite walls Hohmann & Barnard's Lox All® ... more info


250 Ladder Box-Mesh
250 Ladder Box-Mesh

The 250 Ladder Box-Mesh is for block and brick composite walls. Welded boxes project from backup Ladder-Mesh Reinforcement and tie into brick face ... more info


265 Ladder Adjustable Reinforcement Wire
265 Ladder Adjustable Reinforcement Wire

The 265 Ladder Style Adjustable Joint Reinforcement with Winged Loops and Pintles has "winged loops" welded to the backup reinforcing. The loops ... more info


265 S.I.S. Ladder with Seismiclip® Interlock System
265 S.I.S. Ladder with Seismiclip® Interlock System

265 S.I.S. Ladder Style Adjustable Joint Reinforcement combines the 265 Ladder Reinforcement with the Seismiclip® Interlock System (S.I.S.), the ... more info


270 Ladder Eye-Wire
270 Ladder Eye-Wire

270-2X Ladder Eye-Wire is a ladder style adjustable joint reinforcement with eyes and the NEW 2X-Hook. The embedded portion of the 2X-Hook is 3/16ӯ ... more info


270 Ladder Eye-Wire w/Seismic Hook
270 Ladder Eye-Wire w/Seismic Hook

270 Ladder Eye-Wire w/Seismic Hook combines the 270 Ladder Eye-Wire, a ladder syle adjustable joint reinforcement with eyes and pintles, with ... more info


270 S.I.S. Ladder Eye-Wire with Seismiclip® Interlock System
270 S.I.S. Ladder Eye-Wire with Seismiclip® Interlock System

270 S.I.S. Ladder Eye-Wire with Seismiclip® Interlock System combines the 270 Ladder Style Adjustable Joint Reinforcement with Eyes and Pintles with ... more info


270-ML Ladder Adjustable Eye-Wire
270-ML Ladder Adjustable Eye-Wire

270-ML Ladder Adjustable Eye-Wire joint reinforcement features super-heavy-duty eyelets and pintles for superior strength and performance. This is ... more info


270-ML-S.I.S. Ladder Adjustable Eye-Wire
270-ML-S.I.S. Ladder Adjustable Eye-Wire

270-ML-S.I.S. Ladder Adjustable Eye-Wire combines the beneficial features of the 270-ML Ladder Adjustable Eye-Wire joint reinforcement with the ... more info


280 Dub'l Loop-Lok™
280 Dub'l Loop-Lok™

280 Dub'l Loop-Lok™ reinforcement improves upon other systems of adjustable masonry reinforcement. No other system offers all of the following ... more info


280 S.I.S. Dub'l Loop-Lok™ Seismiclip® Interlock System
280 S.I.S. Dub'l Loop-Lok™ Seismiclip® Interlock System

The 280 S.I.S. Dub'l Loop-Lok™ Seismiclip® Interlock System is comprised of the Seismiclip® Interlock System (S.I.S) added to the standard 280 ... more info


280-BL Dub'l Loop-Lok™ with Byna-Lok™ Wire Tie
280-BL Dub'l Loop-Lok™ with Byna-Lok™ Wire Tie

Hohmann & Barnard's 280-BL Dub'l Loop-Lok™; Reinforcement combines the features of 280 Dub'l Loop-Lok™ reinforcement with the benefits of the ... more info


285 Grip-Lok™ Ladder
285 Grip-Lok™ Ladder

The 285 Grip-Lok™ Ladder features 280 Dub'l Loop-Lok Ladder Reinforcement combined with the interlocking heavy-duty Grip-Lok Plate in the brick ... more info


301W - Column Web Tie
301W - Column Web Tie

For tying masonry to structural columns with 359 Weld-on Ties


302W - Column Web Tie
302W - Column Web Tie

For tying masonry to structural columns with 359-FH Weld-on Ties


303 SV - Seismic-Notch Dovetail Anchor
303 SV - Seismic-Notch Dovetail Anchor

303 SV - Seismic-Notch Dovetail Anchor is modified to comply with seismic codes, which call for continuous wire in the veneer to be an integral ... more info


305 - Dovetail Slot
305 - Dovetail Slot

For anchoring masonry to concrete with dovetail ties (eg. 303-SV Seismic-Notch Dovetail Anchor. GAUGES: #305 Slot available in 24, 22, 18, or 16 ga. ... more info


315 - Flexible Dovetail Brick Tie
315 - Flexible Dovetail Brick Tie

For use with #305 Dovetail Slot or anchored directly to backup (NOTE:structural adequacy must be verified by project engineer before surface ... more info


315-BL Byna-Lok™ Flexible Dovetail
315-BL Byna-Lok™ Flexible Dovetail

The 315-BL Byna-Lok is fitted with a dovetail head to fit 305 Dovetail Slot. New masonry veneer is anchored to studs, existing masonry, concrete or ... more info


315-BT - Flexible Dovetail Brick Tie
315-BT - Flexible Dovetail Brick Tie

The 315-BT is fitted with a Vee Byna- Tie®for use with the Seismiclip® Interlock System. For use with 305 Dovetail Slot. Horizontal joint ... more info


341 Series Round Plastic Weep Holes
341 Series Round Plastic Weep Holes

341 Series Round Plastic Weep Holes provide an outlet for water inside a building to move outside the wall and evaporate, they are manufactured from ... more info


342 Rectangular Plastic Weep Holes
342 Rectangular Plastic Weep Holes

342 Rectangular plastic weep holes provide an outlet for water inside a building to move outside the wall and evaporate, they are manufactured from ... more info


343 Weep Hole
343 Weep Hole

343 Weep Hole features louvers configured to direct the passage of water from the wall cavity to outside of building, while inhibiting reverse ... more info


343W - Wilko™ Weep Hole
343W - Wilko™ Weep Hole

343W - Wilko™ Weep Hole features louvers configured to direct the passage of water from the wall cavity to outside of building, while inhibiting ... more info


344 - Rigid Partition Anchor
344 - Rigid Partition Anchor

The 344 - Rigid Partition Anchor is for anchoring load bearing walls at intersections AVAILABLE FINISHES: Plain Steel Hot Dip Galv. Stainless Steel ... more info


345-BL Byna-Lok™ Flexible Tie
345-BL Byna-Lok™ Flexible Tie

The 345-BL is comprised of a Byna-Lok™ Wire Tie with a wrap-around metal strap New masonry veneer can be anchored to studs, existing masonry, ... more info


345-BT Flexible Tie
345-BT Flexible Tie

The 345-BT Flexible Tie is for tying masonry to concrete or CMU backup with a flexible (not rigid) connection. Comprised of a Vee Byna-Tie® with a ... more info


345-BT w/S.I.S. - Flexible Tie
345-BT w/S.I.S. - Flexible Tie

The 345-BT with S.I.S., for tying masonry to concrete or CMU backup with a flexible (not rigid) connection, is comprised of a Vee Byna- Tie® ... more info


345-SV - Seismic-Notch Veneer Anchor
345-SV - Seismic-Notch Veneer Anchor

345-SV - Seismic-Notch Veneer Anchor is modified to comply with seismic codes, which call for continuous wire in the veneer to be an integral ... more info


351 - Wire Column Tie
351 - Wire Column Tie

The 351 - Wire Column Tie is for anchoring masonry to structural column when masonry is parallel to column flange. DIMENSIONS/GAUGES: 3/16" or 1/4" ... more info


352 - Wire Column Tie
352 - Wire Column Tie

The 352 - Wire Column Tie is for anchoring masonry to structural columns when masonry is perpendicular to column flange DIMENSIONS/GAUGES: 3/16" or ... more info


353 - Column Anchor
353 - Column Anchor

The 353 - Column Anchor is for anchoring block or brick to structural columns when masonry is perpendicular to the column flange DIMENSIONS/GAUGES: ... more info


353L - Column Anchor
353L - Column Anchor

The 353L - Column Anchor anchors masonry to the building frame while restraining both positive and negative wind load actions, it has a slotted hole ... more info


354 - Notched Column Anchor (Corrugated Type)
354 - Notched Column Anchor (Corrugated Type)

The 354 - Notched Column Anchor (Corrugated Type) is for anchoring masonry to structural columns when masonry is parallel to the column flange ... more info


355 Column Anchor
355 Column Anchor

The 355 Column Anchor is for anchoring masonry to structural columns when masonry is parallel to the column flange DIMENSIONS/GAUGES: 1/4" thick x 1 ... more info


355L - Column Anchor
355L - Column Anchor

The 355L - Column Anchor anchors masonry to the building frame while restraining both positive and negative wind load actions, it has a slotted hole ... more info


356 Column Anchor
356 Column Anchor

The 356 Column Anchor is for anchoring masonry to structural column when masonry is parallel to column web The 356L has a slotted hole to accept ... more info


356L Column Anchor
356L Column Anchor

The 356L Column Anchor is for anchoring masonry to structural columns when masonry is parallel to the column web The 356L has a slotted hole to ... more info


357 - Beam Anchor
357 - Beam Anchor

The 357 - Beam Anchor is for anchoring masonry to structural beams DIMENSIONS/GAUGES: Standard size is 1 1/4" wide x 12 ga. thick x 12" long ... more info


359 - Weld-on Ties
359 - Weld-on Ties

359 Weld-on Ties are used in conjunction with the Vee-Byna Tie® or the 301W Column Web Tie The systems anchor masonry to the structural frame, ... more info


359-C - Weld-on Ties
359-C - Weld-on Ties

359-C - Weld-on Ties are used in conjunction with the Vee-Byna Tie® or the 301W Column Web Tie The systems anchor masonry to the structural ... more info


359-FH - Weld-on Ties
359-FH - Weld-on Ties

359-FH - Weld-on Ties are used in conjunction with the Vee-Byna Tie® or the 301W Column Web Tie The systems anchor masonry to the structural ... more info


359FP - Weld-On Ties
359FP - Weld-On Ties

359FP - Weld-On Ties are for use when there is a requirement for spray-on fireproofing Exaggerated offset dimension 'L' (specify when ordering) ... more info


359FP-C - Weld-on Ties
359FP-C - Weld-on Ties

359FP-C - Weld-on Ties are for use when there is a requirement for spray-on fireproofing Exaggerated offset dimension 'L' (specify when ordering) ... more info


360 Gripstay™ Channel Slot
360 Gripstay™ Channel Slot

The 360 Gripstay™ Channel Slot is welded onto steel web or flange and accepts any type of Gripstay Anchor DIMENSIONS/GAUGES: 7-1/2" long ... more info


361 - Gripstay™ Channel Slot
361 - Gripstay™ Channel Slot

The 361 - Gripstay™ Channel Slot is furnished with welded straps on top and bottom for embedment into a CMU backup. Accepts any Gripstay™ ... more info


362 - Gripstay™ Channel Slot
362 - Gripstay™ Channel Slot

The 362 - Gripstay™ Channel Slot is furnished with integrally formed end tabs for attachment to masonry. Accepts any Gripstay™ Anchor for ... more info


362-C - Gripstay™ Channel Slot
362-C - Gripstay™ Channel Slot

The 362-C - Gripstay™ Channel Slot is a continuous Gripstay™ channel and accepts any Gripstay™ Anchor for masonry or stone ... more info


362-CX - Gripstay™ Channel Slot
362-CX - Gripstay™ Channel Slot

The 362-CX Gripstay™ Channel is for use on backup block with insulation. Factory-welded prongs bridge the insulation and abut the concrete ... more info


363 - Flexible Gripstay™ Channel Slot Anchor Head
363 - Flexible Gripstay™ Channel Slot Anchor Head

The 363 - Flexible Gripstay™ Channel Anchor Head permits horizontal and vertical movement of the masonry wall while restraining the wall from ... more info


363-BL - Byna-Lok™ Flexible Gripstay™ Channel Slot Anchor
363-BL - Byna-Lok™ Flexible Gripstay™ Channel Slot Anchor

The 363-BL is comprised of a Byna-Lok™ Wire Tie fitted with a 363 Gripstay™ head to fit any style Gripstay™ Channel Slot. The ... more info


363-BT - Flexible Gripstay™ Channel Slot Anchor
363-BT - Flexible Gripstay™ Channel Slot Anchor

The 363-BT is comprised of a Vee Byna- Tie® fitted with a Gripstay head to fit any style Gripstay Channel. (360, 361, 362, 362-C, 362-CX) 363-BT ... more info


364 SV - Seismic-Notch Gripstay™ Channel Slot Anchor
364 SV - Seismic-Notch Gripstay™ Channel Slot Anchor

364 SV - Seismic-Notch Gripstay™ Channel Slot Anchor is modified to comply with seismic codes, which call for continuous wire in the veneer to ... more info


365 - Bent Gripstay™ Channel Slot Anchor
365 - Bent Gripstay™ Channel Slot Anchor

The 365 Bent Gripstay™ Channel Slot anchor ties masonry to steel columns, concrete or existing walls The 365 has standard 1" bend. Longer bends ... more info


Adjustable Wall Ties (Pintles & Eyes)
Adjustable Wall Ties (Pintles & Eyes)

STANDARD SIZES: Pintle Section TIE NO. SIZE 300H 3” 400H 4” 475H 4-3/4” 525H 5-1/4” Eye Section TIE NO. ... more info


Askew Head Bolt
Askew Head Bolt

The beveled head of the askew head bolt engages the internal wedge shape of H&B concrete inserts (LW-340 or HW-340) and produces an automatic ... more info


Backer Rod - Standard
Backer Rod - Standard

Standard Backer Rod is an ideal non-absorbent compressible backup material inserted into a joint to control sealant depth, create a backstop to allow ... more info


Bearing Pad - AASHTO Grade
Bearing Pad - AASHTO Grade

Foamtastic AASHTO Grade Bearing Pad is cut from a molded sheet of polychloroprene (neoprene), a synthetic rubber compound. It is used in steel beams, ... more info


Bearing Pad - Commercial Grade
Bearing Pad - Commercial Grade

Foamtastic Commercial Grade Bearing Pad is a black, dense, molded compound with high compressive strength, superior hardness characteristics and cold ... more info


BL-407 Anchor
BL-407 Anchor

BL-407 is a wire tie and plate combination system that provides adjustability, strength, stiffness, positive connection, corrosion resistance, and is ... more info


BL-523 Brass Expansion Bolt
BL-523 Brass Expansion Bolt

The BL-523 Brass Expansion Bolt is for fastening anchors to concrete, block, brick and into mortar joints. TECH DATA: Internal Bolt: Type 304 ... more info


BL-5407 Masonry Fastener Assembly (Brick-Lok® System)
BL-5407 Masonry Fastener Assembly (Brick-Lok® System)

The BL-5407 masonry fastener assembly for masonry and concrete. Can be used for refacing a brick veneer to masonry, concrete or brick with a cavity ... more info


Byna-Lok™ Seismic Wire Tie
Byna-Lok™ Seismic Wire Tie

New masonry veneer can be anchored to studs, existing masonry, concrete or steel with the Byna-Lok Wire Tie. Various H&B Anchor systems can be fitted ... more info


C-Coat™ Flashing
C-Coat™ Flashing

H&B C-Coat™ Flashing is a copper thru-wall flashing with the following advantages: The flexibility and toughness of copper are combined with the ... more info


C-Fab™ Flashing
C-Fab™ Flashing

C-Fab™ Flashing is a sheet of soft-tempered copper that is permanently coated and bonded between two layers of asphalt-saturated glass fabric. ... more info


C-Kraft™ Duplex Flashing
C-Kraft™ Duplex Flashing

C-Kraft™ Duplex uses the same sheet copper as C-Fab™ Flashing, but the end product is lighter weight due to the use of kraft paper in ... more info


Cast Aluminum Brick Vents - Style "CA"
Cast Aluminum Brick Vents - Style "CA"

Style "CA" brick vents features: Cast Aluminum Mill Finish* Rear waterstop Load-bearing One piece molded unit Overlapping blades Continuous ... more info


Channel-Tee Seismic-Notch Anchor System
Channel-Tee Seismic-Notch Anchor System

The Channel-Tee Seismic-Notch Anchor System is ideal for use where maximum vertical adjustability is preferred. The Continuous Channel is surface ... more info


Column Wrap
Column Wrap

Column Wrap is a closed-cell cross-linked polyethylene foam isolation barrier. Minimum life expectancy of 50 years Available with an optional ... more info


Concealed Lintel Systems
Concealed Lintel Systems

New! Designed and engineered concealed lintel systems for brickwork Architects can feel free to incorporate this classic look into prestigious ... more info


Continuous Wire
Continuous Wire

The use of a continuous wire in masonry veneer walls is beneficial in providing additional protection against problems arising from thermal expansion ... more info


Copper Termite Shield
Copper Termite Shield

H&B Copper Termite Shield is a sheet of soft-tempered copper that is permanently coated on one side with a polyethylene membrane. Compatible with ... more info


Copper-Flex™
Copper-Flex™

Hohmann & Barnard’s Copper-Flex™ Copper Fabric Flashing consists of polyethylene film laminated to 3, 5, or 7 oz. copper sheet. Copper-Flex™ is a ... more info


Copper-Tuff™
Copper-Tuff™

Copper-Tuff™ Thru-Wall Flashing is a patented super-strong polymer coating bonded to 3, 5, or 7 oz. copper sheet for maximum performance at an ... more info


Copper-Tuff™ SA
Copper-Tuff™ SA

Copper-Tuff™ SA Hohmann & Barnard’s 1st Peel-N-Stick Copper Flashing Copper-Tuff™ SA is a SELF-ADHERING thru-wall / surface-mounted copper ... more info



IMPORTANT: As each construction project is unique, the appropriate use of application data and the selection of any product described herein must be determined by competent architects, engineers and other appropriate professionals who are responsible for working within predetermined parameters of or establishing the specific requirements of the project.

In accepting, opening, copying, and/or using any drawings, reports or data in any form of electronic media generated and transmitted/furnished by Hohmann & Barnard, Inc., the recipient agrees that all such electronic files constitute proprietary service data of Hohmann & Barnard, Inc., which entity is deemed the author and as such is vested with all common law, statutory law and other rights, including copyrights. The recipient also agrees not to transfer these electronic files to others without the proprietary notice of Hohmann & Barnard, Inc. and agrees to place a similar restriction on further transfer.

Hohmann & Barnard, Inc. makes no warranties, either expressed or implied, of correctness and fitness for use for any particular purpose. The recipient agrees that any use of these files is at their own risk. In no event shall Hohmann & Barnard, Inc. be liable for direct, indirect or consequential damages as a result of the recipient use or reuse of the electronic files. Hohmann & Barnard, Inc. shall be held harmless against all damages, liabilities or costs, including reasonable attorneys' fees and defense costs, arising out of or resulting from use of these electronic files.


Back

Copyright © 2014 Hohmann & Barnard, Inc

30 Rasons Court :: Hauppauge, NY 11788-0270
Telephone: (631) 234-0600 :: FAX: (631) 234-0683 :: Contact Us
Privacy Policy | Terms of Use | Site Map