120 Truss-Mesh

pdf

120 Truss-Mesh is a truss type continuous length joint reinforcement for single wythe walls.

  • Hohmann & Barnard's Lox All® Truss-Mesh and Lox All® Ladder-Mesh are continuous lengths of joint reinforcement that are embedded into the horizontal mortar joints of masonry walls
  • Joint reinforcement has long proven to be necessary for superior performance of masonry wall construction, as it offers the following benefits:
    • Reinforces a variety of masonry walls
    • Greatly reduces cracking that can arise from thermal stresses
    • Enhances resistance to water penetration, as cracks are controlled
    • Increases lateral flexural strength
    • Bonds exterior and interior masonry wythes together in composite walls
    • Bonds masonry at intersecting walls and corners
    • Increases elasticity
    • Increases performance of masonry walls under various stresses
    • Fabricated in conformance with ASCE/ACI 530 building code requirements for masonry structures, and ASTM A 951 (standard specification for masonry joint reinforcement)

Effective Area of Horizontal Joint Reinforcement for Hohmann & Barnard Continuous Systems Chart (PDF)

GAUGES:

  • Reinforcing can be STANDARD WEIGHT (9 ga x 9 ga), EXTRA HEAVY (3/16" Side Rods x 9 ga Cross Rods) or SUPER HEAVY DUTY (all 3/16")

AVAILABLE FINISHES:

  • Mill Galvanized
  • Hot Dip Galvanized
  • Stainless Steel

DIMENSIONS:

  • Packed 500’ per bundle (50 pcs. - 10' long)
  • Tri-Mesh, Twin-Mesh and Box-Mesh packed 250’ per bundle (25 pcs. - 10’ long)
  • Corners and Tees packed 25 pcs per bundle

CONSTRUCTION CONDITIONS


• STANDARD

AVAILABLE FINISHES


• Mill Galvanized
• Hot Dip Galvanized
• Stainless Steel - Type 304
• Stainless Steel - Type 316

JOINT REINFORCEMENT TYPE


• TRUSS

WIRE SIZE


• (S) Standard Weight Rods: 9 ga. side x 9 ga. cross
• (EH) Extra Heavy Rods: 3/16” side x 9 ga. cross
• (SHD) Super Heavy Duty: 3/16” side x 3/16” cross