Flex-Flash® Drip Edge

pdf

H&B’s Flex-Flash® Drip Edge is a 3" wide by 45-mil thick product formulated with Elvaloy® Kee*.

  • Available in colors to match mortar and / or brick (see list below).
  • Extremely tough, with excellent impact and tear resistance
  • Flexibility is maintained in all weather environments, even in extreme heat or cold
  • Highly resistant to oils and repels most chemicals
  • Not susceptible to UV degradation
  • Compatible with most silicone and urethane sealants.

* Elvaloy is a registered trademark of the DuPont Company.

NOTE:

Patents Pending

Available colors:

DRIP EDGE COLOR OPTIONS

Flex Flash® Drip Edge Performance Data

Tear Strength

 
  ASTM D-751, A  
    Machine Direction
100.44 (lbf)
    Cross Machine Direction 87.10 (lbf)
Tear Strength at Break
 
  ASTM D-751, A
 
    Machine Direction
337.25 (lbf)
    Cross Machine Direction 323.10 (lbf)
Elongation at Break
 
  ASTM D-751, A
 
    Machine Direction
34.49%
    Cross Machine Direction 26.51%
Seam Strength
 
  ASTM D-751 370.88 (lbf)
Puncture Resistance
 
  ASTM D-751 73.22 (lbf)
Heat Aging of Membrane
 
    Break Strength at Break
N/A
    Elongation at Break N/A
Dimensional Stability
 
  ASTM D-1204 (for 6 hrs. @ 176)
N/A
Water Absorption
 
    ASTM D-570 (for 48 hrs. @ 70) N/A
       

Sealant Compatibility

Company Product Primer Required
Urethanes
   
SIKA
Sikaflex-1A #260-205
Sonneborn
Sonolastic NP1 #733
Tremco Dymonic #6 or #17
     
Silicones
   
Dow Corning
790 & 791
1200 Prime Coat
  795 (Dark colors only) 1205 Prime Coat
GE Silicones
Silpruf® SS4179
Pecora 890 & 895 P-120
Tremco Spectrem 2 #10

 

Related Products