180 S.I.S. Dub'l Loop-Lok™ Seismiclip® Interlock System

pdf

The 180 S.I.S. Dub'l Loop-Lok™ combines the Seismiclip® Interlock System with the standard Lox-All® 180 Dub'l Loop-Lok. This allows continuous wire to be added to the outer wythe (see benefits below).

  • Hohmann & Barnard's Dub'l Loop-Lok Reinforcement improves upon other systems of adjustable masonry reinforcement. No other system offers all of the following features:
    • Allows in-plane vertical and horizontal movement of masonry wythes while restraining tension and compression.
    • Loops welded shut to maintain allowable tolerance and system integrity.
    • Unlike horizontal eyelets, vertical loops will not clog with mortar as construction progresses.
    • Loops extend one direction only to allow simple placement of insulation.
    • 100% protection against separation of Wire Tie from reinforcement.
    • Also available with the Seismiclip® Interlock System (#180 S.I.S.), suitable for seismic zones.
    • Fabricated in conformance with ASCE/ACI 530 building code requirements for masonry structures and ASTM A 951 (standard specification for masonry joint reinforcement).
    • Optional Feature! Special loop with 2 ¼” vertical adjustability. Ideal for Econo or Utility Bricks. Request when ordering.
  • Benefits of Continuous Wire:
    • Enhanced Performance: The use of a continuous wire in masonry veneer walls is beneficial in providing additional protection against problems arising from thermal expansion and contraction. It also allows for a more uniform distribution of lateral forces.
    • Seismic Zone Conformance: This system conforms to the requirements of the Uniform Building Code for seismic zones. The code requires anchored veneer walls to have a continuous wire embedded in the mortar joint. The wire is secured to the tie anchor, which is fastened to the supporting structure.

GAUGES:

  • Reinforcing for interior wythe can be STANDARD WEIGHT (9 ga side rods x 9 ga cross rods), EXTRA HEAVY (3/16" side rods x 9 ga Cross Rods), or SUPER HEAVY DUTY (3/16" side rods x 3/16" cross rods)
  • Loops and Ties are 3/16" dia. standard.
  • Continuous wire available 9 ga. or 3/16" diameter.

AVAILABLE FINISHES:

  • Mill Galvanized
  • Hot Dip Galvanized
  • Stainless Steel

CONSTRUCTION CONDITIONS


• SEISMIC

AVAILABLE FINISHES


• Hot Dip Galvanized
• Stainless Steel - Type 304
• Stainless Steel - Type 316

JOINT REINFORCEMENT TYPE


• TRUSS

JOINT REINFORCEMENT FEATURE


• VERTICAL LOOP (DUB'L LOOP-LOK®)

WIRE SIZE


• (S) Standard Weight Rods: 9 ga. side x 9 ga. cross
• (EH) Extra Heavy Rods: 3/16” side x 9 ga. cross
• (SHD) Super Heavy Duty: 3/16” side x 3/16” cross