180-BL Dub'l Loop-Lok™ with Byna-Lok™ Wire Tie

pdf

180-BL Dub'l Loop-Lok™ with Byna-Lok™ Wire Tie combines the features of Hohmann & Barnard's 180 Lox-All® Dub'l Loop-Lok™ Adjustable Truss Reinforcement with the Byna-Lok™ Wire Tie

    180 Lox-All® Dub'l Loop-Lok™ offers the following features:

    • Optional Feature! Special loop with 2 ¼” vertical adjustability. Ideal for Econo or Utility Bricks. Request when ordering.
    • Allows in-plane vertical and horizontal movement of masonry wythes while restraining tension and compression.
    • Loops welded shut to maintain allowable tolerance and system integrity.
    • Unlike horizontal eyelets, vertical loops will not clog with mortar as construction progresses.
    • Loops extend one direction only to allow simple placement of insulation.
    • 100% protection against separation of Wire Tie from reinforcement.

    Byna-Lok™ Wire Tie can anchor masonry veneer to studs, existing masonry, concrete or steel , affording easy and secure insertion of the continuous joint reinforcing wire. Masonry veneer walls are then reinforced with continuous wire.

    GAUGES:

    • (S) Standard: 9 ga. side rods x 9 ga. cross rods
    • (EH) Extra Heavy: 3/16" side rods x 9 ga. cross rods
    • (SHD) Super Heavy Duty: 3/16" side rods x 3/16" cross rods
    • Loops and Ties are 3/16" dia. standard.
    • Continuous wire available 9 ga. or 3/16" diameter.

    AVAILABLE FINISHES:

    • Mill Galvanized
    • Hot Dip Galvanized
    • Stainless Steel

    NOTES:

    • Also available with the Seismiclip® Interlock System (180 S.I.S.), suitable for seismic zones.
    • Fabricated in conformance with ASCE/ACI 530 building code requirements for masonry structures and ASTM A 951 (standard specification for masonry joint reinforcement).

CONSTRUCTION CONDITIONS


• SEISMIC

AVAILABLE FINISHES


• Hot Dip Galvanized
• Stainless Steel - Type 304
• Stainless Steel - Type 316

JOINT REINFORCEMENT TYPE


• TRUSS

JOINT REINFORCEMENT FEATURE


• VERTICAL LOOP (DUB'L LOOP-LOK®)

WIRE SIZE


• (S) Standard Weight Rods: 9 ga. side x 9 ga. cross
• (EH) Extra Heavy Rods: 3/16” side x 9 ga. cross
• (SHD) Super Heavy Duty: 3/16” side x 3/16” cross