265 Ladder Adjustable Reinforcement Wire

pdf

The 265 Ladder Style Adjustable Joint Reinforcement with Winged Loops and Pintles has "winged loops" welded to the backup reinforcing.

  • The loops accept the pintles to allow vertical adjustability while restraining transverse movement of the two wythes.
  • Suitable for collar joint conditions, cavity walls or insulated walls
  • Winged Loops and 2X-HOOK™ 16" O.C.
  • Fabricated in conformance with ASCE/ACI 530 building code requirements for masonry structures, and ASTM A 951 (standard specification for masonry joint reinforcement)

The compressed leg 2X-HOOK™ has been tested and designed to withstand over 200-lbf, in tension or compression, at maximum allowed offset (ACI 530 6.2.2.5.5.4) of 1-1/4” (disengagement of the pintle from the veneer anchor). These results exceed BIA recommendations and the capabilities of standard “round wire” hooks or pintles by over 100%!

  • NOTE: 2X-HOOK™ CAN BE INSTALLED WITH LEGS POINTING UP OR DOWN.
  • The embedded portion of the 2X-Hook is 3/16”DIA round wire, satisfying the code requirement that the mortar bed thickness (typically 3/8”) must be twice the diameter of the wire.
  • 2X-Hook: U.S. Pat. No. 8,613,175 Test results available upon request.

DIMENSIONS/GAUGES:

  • Winged Loops and 2X-HOOK™ 16" O.C.
  • Reinforcing for interior wythe can be STANDARD WEIGHT (9 ga x 9 ga), EXTRA HEAVY (3/16" Side Rods x 9 ga Cross Rods) or SUPER HEAVY DUTY (all 3/16")
  • Eyes and 2X-HOOK™ are 3/16" dia. standard

AVAILABLE FINISHES:

  • Hot Dip Galvanized
  • Type 304 Stainless Steel
  • Type 316 Stainless Steel

PACKING INFORMATION:

  • Packed 500' per bundle (50 pcs - 10' long)

CONSTRUCTION CONDITIONS


• STANDARD

AVAILABLE FINISHES


• Hot Dip Galvanized
• Stainless Steel - Type 304
• Stainless Steel - Type 316

JOINT REINFORCEMENT TYPE


• LADDER

JOINT REINFORCEMENT FEATURE


• WINGED LOOPS

WIRE SIZE


• (S) Standard Weight Rods: 9 ga. side x 9 ga. cross
• (EH) Extra Heavy Rods: 3/16” side x 9 ga. cross
• (SHD) Super Heavy Duty: 3/16” side x 3/16” cross