165 Adjustable Truss

pdf

165 Lox-All® Truss Style Adjustable Joint Reinforcement has "winged loops" welded to the back-up reinforcing. The loops accept the compressed leg 2X-HOOK™ to allow vertical adjustability while restraining transverse movement of the two wythes.

  • Suitable for: Collar joint conditions, Cavity walls, and Insulated walls
  • Fabricated in conformance with ASCE/ACI 530 building code requirements for masonry structures and ASTM A 951

The compressed leg 2X-HOOK™ has been tested and designed to withstand over 200-lbf, in tension or compression, at maximum allowed offset (ACI 530 6.2.2.5.5.4) of 1-1/4” (disengagement of the pintle from the veneer anchor). These results exceed BIA recommendations and the capabilities of standard “round wire” hooks or pintles by over 100%!

GAUGES:

  • Reinforcing for interior wythe can be STANDARD WEIGHT (9 ga side rods x 9 ga cross rods), EXTRA HEAVY (3/16" side rods x 9 ga Cross Rods), or SUPER HEAVY DUTY (3/16" side rods x 3/16" cross rods)
  • Winged loops are 3/16" dia. standard
  • Standard 2X-HOOK™ compressed leg pintles manufactured from 3/16" dia. wire.

AVAILABLE FINISHES:

  • Mill Galvanized
  • Hot Dip Galvanized
  • Stainless Steel

NOTE:

  • NOTE: 2X-HOOK™ CAN BE INSTALLED WITH LEGS POINTING UP OR DOWN.
  • The embedded portion of the 2X-Hook is 3/16”DIA round wire, satisfying the code requirement that the mortar bed thickness (typically 3/8”) must be twice the diameter of the wire.
  • 2X-HOOK™: U.S. Pat. No. 8,613,175 Test results available upon request.

AVAILABLE FINISHES


• Hot Dip Galvanized
• Stainless Steel - Type 304
• Stainless Steel - Type 316

JOINT REINFORCEMENT TYPE


• TRUSS

JOINT REINFORCEMENT FEATURE


• WINGED LOOPS

WIRE SIZE


• (S) Standard Weight Rods: 9 ga. side x 9 ga. cross
• (EH) Extra Heavy Rods: 3/16” side x 9 ga. cross
• (SHD) Super Heavy Duty: 3/16” side x 3/16” cross