HB-200-X

pdf

The NEW HB-200-X improves upon the standard HB-200 by adding three pronged punchouts that project from the back of the anchor. The prongs prevent positive wind-loads from crushing the wallboard by transferring these loads to the back of the stud.

  • HB-200-X is an adjustable veneer anchor with prongs that project from the back to prevent positive wind-loads from crushing the wallboard.
  • The L-shaped plate section has numerous ribs for added strength and 9/32" holes for connecting screws.
  • The eyelets allow pintle insertion (1 1/4" maximum allowable eccentricity) and are sized to prevent in-and-out movement beyond allowable tolerances.
  • Veneer can be adapted for Seismic applications by adding the optional H&B Seismic Hook and Continuous Wire (9 gauge or 3/16" diameter continuous wire available).

GAUGES:

  • 14 ga. or 12 ga. thick

AVAILABLE FINISHES:

  • Hot-dipped galvanized
  • Type 304 stainless steel (Type 316 optional)

DIMENSIONS:

  • Pintle lengths 3", 4", 5", 6" or 7"
  • Legs fabricated to accommodate up to 4" thick insulation and/or wallboard combination (state thickness when ordering)

NOTES:

CONSTRUCTION CONDITIONS


• STANDARD

BACKUP TYPE/CONDITIONS


• Concrete Backup
• CMU/Masonry Backup
• Metal Stud Backup
• Wood Stud Backup

AVAILABLE FINISHES


• Hot Dip Galvanized
• Stainless Steel - Type 304
• Stainless Steel - Type 316

ANCHOR TYPE


• WIRE TIE & PLATE

ANCHOR FEATURES


• Secures Insulation to Backup
• Vertical Adjustability
• Prevents Damage to Sheathing