HB-200-X

DESCRIPTION:
The NEW HB-200-X improves upon the standard HB-200 by adding three pronged punchouts that project from the back of the anchor. The prongs prevent positive wind-loads from crushing the wallboard by transferring these loads to the back of the stud.

• HB-200-X is an adjustable veneer anchor with prongs that project from the back to prevent positive wind-loads from crushing the wallboard.
• The L-shaped plate section has numerous ribs for added strength and 9/32" holes for connecting screws.
• The eyelets allow pintle insertion (1 1/4" maximum allowable eccentricity) and are sized to prevent in-and-out movement beyond allowable tolerances.
• Veneer can be adapted for Seismic applications by adding the optional H&B Seismic Hook and Continuous Wire (9 gauge or 3/16" diameter continuous wire available).

GAUGES:

• 14 ga. or 12 ga. thick

AVAILABLE FINISHES:

• Hot-dipped galvanized or Type 304 stainless steel; Type 316 optional

DIMENSIONS:

• Pintle lengths 3" (76 mm), 4" (102 mm) or 4 3/4" (121 mm)

NOTES:

• Available with optional Seismiclip® and Continuous Wire
• Legs fabricated to accommodate up to 4" thick insulation (state thickness when ordering)
• Standard HB-200 information.