Tie-HVR-195V Anchor System - Truss Type

pdf

Truss Type adjustable rubble (or ashlar) stone anchor system for cavity or insulated walls.

  • In this anchor system, the backup is reinforced with a truss type reinforcement with projecting boxes and a factory-welded restraint bar
  • The mason places the vertical rod into the projecting boxes as shown (after inserting it into the hole of the flexible wire tie)
  • Rubble stone can then be tied easily to the backup using these flexible ties wherever the veneer mortar joint may lie.
  • Ideal for when horizontal mortar joints do not align, and a large amount of vertical adjustability is required.
  • Tie-HVR-195V Anchor System - Truss Type

DIMENSIONS/GAUGES:

  • Backup Truss available with any combination of 9 ga. or 3/16" dia. Side and Cross Rods
  • Vertical Hook is available in 5/16" or 3/8" diameter. Specify when ordering. (Engineering calculations available on request.)
  • Flexible Wire Ties are standard 3/16" dia. x length to suit

AVAILABLE FINISHES:

  • Hot Dip Galvanized
  • Stainless Steel

NOTES:

BACKUP TYPE/CONDITIONS


• Cavity/Insulated CMU Backup
• CMU/Masonry Backup

AVAILABLE FINISHES


• Hot Dip Galvanized
• Stainless Steel - Type 304
• Stainless Steel - Type 316

JOINT REINFORCEMENT TYPE


• TRUSS

WIRE SIZE


• (S) Standard Weight Rods: 9 ga. side x 9 ga. cross
• (EH) Extra Heavy Rods: 3/16” side x 9 ga. cross
• (SHD) Super Heavy Duty: 3/16” side x 3/16” cross

DIMENSIONS/GAUGES


• Flexible Wire Ties Standard 3/16" Ø x length to suit
• Vertical J-Hook 3/8”Ø, 7/16”Ø, or 1/2”Ø