Flashings, Mastics & Primers


C-Coat™ Flashing

C-Coat™ Flashing

H&B C-Coat™ Flashing is a copper thru-wall flashing with the following advantages: The flexibility and toughness of copper are combined with...
C-Fab™ Flashing

C-Fab™ Flashing

C-Fab™ Flashing is a sheet of soft-tempered copper that is permanently coated and bonded between two layers of asphalt-saturated glass fabric....
C-Kraft™ Duplex Flashing

C-Kraft™ Duplex Flashing

C-Kraft™ Duplex uses the same sheet copper as C-Fab™ Flashing, but the end product is lighter weight due to the use of kraft paper in...
Copper-Fabric™ NA Copper Fabric Flashing

Copper-Fabric™ NA Copper Fabric Flashing

Copper-Fabric™ NA Copper Fabric Flashing is a composite membrane consisting of a polyethylene film laminated to BOTH sides of a 3, 5, or 7 oz....
Copper-Fabric™ SA Self-Adhering Flashing

Copper-Fabric™ SA Self-Adhering Flashing

SA Self-Adhering Copper Fabric Flashing is a composite membrane consisting of a polyethylene film laminated to a 3, 5, or 7 oz. copper sheet to...
EPRA-MAX™ EPDM Thru-Wall Flashing

EPRA-MAX™ EPDM Thru-Wall Flashing

EPRA-MAX™ EPDM Thru-Wall Flashing remains flexible to -49° F and is not susceptible to decomposition due to UV exposure, making it an excellent...
Flex-Flash® Flashing

Flex-Flash® Flashing

H&B's Flex-Flash® is a polyester scrim reinforced 40-mil thick product formulated with Elvaloy® Kee. It does not drool and combines the...
HB Sealant

HB Sealant

HB SEALANT is a multi-purpose, resilient joint sealant that combines economy and high performance. It is ideal for a wide range of applications where...
Mastic for Asphalt Coated Flashing

Mastic for Asphalt Coated Flashing

Sandell Trowel Mastic is a cut-back asphalt, containing long-fibered material, manufactured in proper consistency for easy application. Sandell...
MFL - Metal Flashing

MFL - Metal Flashing

MFL - Metal Flashing can be formed according to job requirements. State dimensions when ordering. Comes standard with factory formed, hemmed drip...
MFL-STF - Metal Sawtooth Flashing

MFL-STF - Metal Sawtooth Flashing

Sawtooth Metal Flashing (STF) acts to bond in all directions. Can be manufactured for parapet/coping applications, or bent for relief angle...
Mighty-Flash™ SA Self-Adhering SS Fabric Flashing

Mighty-Flash™ SA Self-Adhering SS Fabric Flashing

Mighty-Flash™ SA is a self-adhering stainless steel fabric flashing product with a proprietary clear adhesive. The adhesive is...
Mighty-Flash™ Stainless Steel Fabric Flashing

Mighty-Flash™ Stainless Steel Fabric Flashing

Mighty-Flash™ is a stainless steel fabric flashing, a Class A material consisting of a layer of polymeric fabric with a single sheet of 304...
Primer-SA Water-Based Primer for Self-Adhering Flashing

Primer-SA Water-Based Primer for Self-Adhering Flashing

Hohmann & Barnard’s Primer-SA is a water based, modified polymer primer that can be used in a variety of self adhering flashing applications....
Stretch-X-Seal™ Detail Tape

Stretch-X-Seal™ Detail Tape

Stretch-X-Seal™ is a flexible, "stretchable", and tear resistant flashing detail tape that allows for easy installation in awkward...
TeXtroflash™ Flashing

TeXtroflash™ Flashing

H&B's Textroflash™ Flashing a thru-wall flashing/surface-mounted flashing is a 40-mil thick composite membrane with a new, proprietary adhesive...
X-SEAL® Tape

X-SEAL® Tape

X-SEAL® TAPE is adhesive-backed and is applied to the substrate behind the X-SEAL® Anchor for additional protection against air and moisture...

Narrow Your Results

By FLASHING/DETAIL TAPE FEATURES: