Downloads - Submittal Sheets


RB-Twin Rebar Positioners
RB-Twin Rebar Positioners have double loops to hold four rebar in the center of the block, the simple Z-shaped wire bridges the cell of block while details
RS Series - Rubber Control Joint
RS Series is a Rubber Control Joint designed for masonry walls at control joints Extruded rubber material Rubber material conforms to ASTM D-2000 details
Seismic Clip 300C w/HB-213
The 300C is a seismic clip welded to a hook (pintle) and designed for use with the HB-213 adjustable veneer anchor. That features a L-shaped plate details
Seismic Hook
Hohmann & Barnard's SH-Seismic Hook: This hook is "swaged" (indented) in two places to accommodate either a 9 gauge or 3/16" continuous wire A details
Seismic Plate Pintle HB-213S w/HB-213 (T-LOK TIE™)
The HB-213 w/HB-213S, formerly known as T-LOK TIE™ is an adjustable veneer anchor assembly with a heavy-duty plate pintle that features a details
Seismiclip® Interlock System (S.I.S.) - Seismic Clip
The Seismiclip® (S.I.S.) seismic clip will accept standard H&B Wire Ties and Continuous Wire. Horizontal Joint Reinforcement Wire and Masonry details
Sharktooth Insert
H&B Sharktooth Insert has various applications and is capable of developing working loads up to 8,000#/ft. in both shear and tension. It is details
Slip-Set™ Stabilizer
The Slip-Set™ Stabilizer bonds masonry walls and restrains lateral (shear) movements while allowing expansion and control joints to perform as details
Spira-Lok®
Spira-Lok® is the Original Helical Wall Tie System A one-piece, flexible stainless steel wall tie for pinning masonry to new or existing walls. details
SPYRA-LOX® Rebar Lap-Joint Tie
SPYRA-LOX® Rebar Lap-Joint Tie eliminates cumbersome procedure of tying lap-joined rebars together in reinforced walls. Increases worker details
Stone Anchors
For more than 75 years, Hohmann & Barnard, Inc. has specialized in the design and manufacture of stone anchoring systems. In addition to designing details

Go to the Stone Anchor page and click on stone anchor images, names, or numbers to download editable submittal sheets (pdf).

    Stone Anchors (2-SEAL™)
    H&B is now offering stone anchor systems that incorporate the popular 2-SEAL™ and 2-SEAL™ THERMAL WING NUT anchors. Click on anchor details
    Stretch-X-Seal™ Detail Tape
    Stretch-X-Seal™ is a flexible, "stretchable", and tear resistant flashing detail tape that allows for easy installation in awkward details
    Stretch-X-Seal™ Window Flashing
    Stretch-X-Seal™ is a “stretchable” flashing tape for Window Sills and Difficult Shapes often found in residential construction projects. Made details
    T1 - Termination Bar
    T1 - Termination Bar is used at top of flashing to secure it to backup and is compatible with all H&B membrane and copper-laminate flashings. details
    T2 - Aluminum Termination Bar
    T2 - Aluminum Termination Bar, which has a 1/4” flange on top for easy caulking, is used at the top of flashing to secure it to backup. Compatible details
    T2 - Termination Bar
    T2 - Termination Bar, which has a 3/8” flange on top for easy caulking, is used at top of flashing to secure it to backup. Compatible with all H&B details
    TBS-Thermal Brick System
    REDUCE THERMAL TRANSFER! The TBS Thermal Brick Support from HOHMANN & BARNARD is a groundbreaking brick veneer support system that reduces details
    TEXTROFLASH™ Residential Flashing
    H&B's Textroflash™ Flashing is a thru-wall flashing/surface-mounted flashing is an excellent choice for your next residential project. details
    TeXtroflash™ Flashing
    H&B's Textroflash™ Flashing a thru-wall flashing/surface-mounted flashing is a 40-mil thick composite membrane with a new, proprietary adhesive details
    Thermal 2-Seal™ Tie
    The THERMAL 2-SEAL™ TIE is an innovative single screw veneer tie for metal stud construction Fabricated from stainless steel and COATED with a details
    Thermal Concrete 2-Seal™ Tie
    The THERMAL CONCRETE 2-SEAL™ TIE features a screw with special alternating threads for use with concrete, CMU, wood stud, or brick backup. details
    Tie-2R Anchor System
    Designed for rubble stone walls with masonry backup, and provides anchors where they are needed. The wall reinforcement has a projecting third rod. details
    Tie-HVR-190V Anchor System
    Designed for a filled cavity condition. The backup is reinforced with a truss type reinforcement The mason places the vertical rod into the collar details
    Tie-HVR-195V Anchor System - Truss Type
    Truss Type adjustable rubble (or ashlar) stone anchor system for cavity or insulated walls. In this anchor system, the backup is reinforced with a details
    Tie-HVR-195VB Anchor System for Rubble Stone
    Adjustable Anchor System for Rubble (Ashlar) Stone designed for concrete or metal stud backup walls. In this anchor system, the L-shaped bracket is details
    Tie-HVR-295V Anchor System - Ladder Type
    Ladder Type rubble (or ashlar) stone anchoring system for cavity or insulated walls. In the Tie-HVR-295V, the backup is reinforced with a ladder type details
    Top-Seal Tape™ Over-Flange Tape
    Top-Seal Tape™ is a self-sealing, adhesive-backed over-flange tape. Self-seals around fasteners Adhesive-backed with removable release paper details
    Torq-Lok® 500 Series Anchor
    The 500 Series Anchor, for solid backup, features 360 Brass expanders with a Type 304 St/Steel shaft and 300 St/Steel hardware TECH DATA: Hole in details
    Torq-Lok® 510 Series Anchor
    The Torq-Lok® 510 Series Anchor for hollow backup, features 360 Brass expanders with a Type 304 St/Steel shaft and 300 St/Steel hardware. TECH details
    Torq-Lok® 520 Series Anchor
    The Torq-Lok® 520 Series Anchor for stud backup, features 360 Brass expanders with Type 304 St/Steel shaft and 300 St/Steel hardware TECH DATA: details
    Torq-Lok® 530 Series Anchor
    The Torq-Lok® 530 Series Anchor for stud backup, features 360 Brass expanders with Type 304 St/Steel shaft and 300 St/Steel hardware TECH DATA: details
    VBT - Vee Byna-Tie
    Vee Byna-Tie (VBT) is for use with X-SEAL or DW-10 series veneer anchors; also for use with #359 Weld-on Ties. AVAILABLE FINISHES: Hot Dip Galvanized details
    VS Series - PVC Control Joint
    VS Series - PVC Control Joint, is a complete line of polyvinyl chloride control joints suitable for various wall conditions. The PVC material details
    X-Barrier™ Peel & Stick Barrier
    X-Barrier™ is a sheet applied self-adhesive, membrane to provide an air and water barrier when applied to above grade wall assemblies. details
    X-SEAL® Anchor
    The X-SEAL® Anchor meets or exceeds requirements of the Commonwealth of Massachusetts State Building Code for air leakage and water penetration details
    X-SEAL® Byna-Lok®
    The Byna-Lok Tie is added to the X-Seal Veneer Anchor System to create the X-SEAL™/Byna-Lok® System The Byna-Lok® Wire Tie accepts details
    X-Seal® Membrane
    X-Seal® Membrane is a self-Sealing, self-adhering detail tape designed to work in conjunction with ENVIRO-BARRIER™ system. X-Seal® details
    X-SEAL® S.I.S. Anchor
    The Seismiclip® Interlock System is added to the X-Seal Veneer Anchor System to create the X-SEAL® S.I.S. Anchor System The X-SEAL Anchor details
    X-SEAL® Tape
    X-SEAL® TAPE is adhesive-backed and is applied to the substrate behind the X-SEAL® Anchor for additional protection against air and moisture details
    X-SEAL® Window Tape
    H&B’s X-SEAL® Tape is ideally suited for use as an over-flange tape or window flashing. It is a self-sealing tape with adhesive-backing (with details

    Narrow Your Results

    By Category:


    By CONSTRUCTION CONDITIONS:


    By BACKUP TYPE/CONDITIONS:


    By AVAILABLE FINISHES:


    By JOINT REINFORCEMENT TYPE:


    By JOINT REINFORCEMENT FEATURE:


    By WIRE SIZE:


    By ANCHOR TYPE:


    By ANCHOR FEATURES:


    By AIR BARRIER TYPE:


    By AIR BARRIER FEATURE:


    By DIMENSIONS/GAUGES:


    By FLASHING/DETAIL TAPE FEATURES:


    By COLUMN/BEAM ANCHOR POSITION:


    By COLUMN/BEAM ANCHOR FEATURES:


    By COLUMN TIE WIRE DIAM: