Downloads - Safety Data Sheets


RB-Twin Rebar Positioners
RB-Twin Rebar Positioners have double loops to hold four rebar in the center of the block, the simple Z-shaped wire bridges the cell of block while details
RS Series - Rubber Control Joint
RS Series is a Rubber Control Joint designed for masonry walls at control joints Extruded rubber material Rubber material conforms to ASTM D-2000 details
Seismic Clip 300C w/HB-213
The 300C is a seismic clip welded to a hook (pintle) and designed for use with the HB-213 adjustable veneer anchor. That features a L-shaped plate details
Seismic Hook
Hohmann & Barnard's SH-Seismic Hook: This hook is "swaged" (indented) in two places to accommodate either a 9 gauge or 3/16" continuous wire A details
Seismic Plate Pintle HB-213S w/HB-213 (T-LOK TIE™)
The HB-213 w/HB-213S, formerly known as T-LOK TIE™ is an adjustable veneer anchor assembly with a heavy-duty plate pintle that features a details
Seismiclip® Interlock System (S.I.S.) - Seismic Clip
The Seismiclip® (S.I.S.) seismic clip will accept standard H&B Wire Ties and Continuous Wire. Horizontal Joint Reinforcement Wire and Masonry details
Sharktooth Insert
H&B Sharktooth Insert has various applications and is capable of developing working loads up to 8,000#/ft. in both shear and tension. It is details
Spira-Lok®
Spira-Lok® is the Original Helical Wall Tie System A one-piece, flexible stainless steel wall tie for pinning masonry to new or existing walls. details
SPYRA-LOX® Rebar Lap-Joint Tie
SPYRA-LOX® Rebar Lap-Joint Tie eliminates cumbersome procedure of tying lap-joined rebars together in reinforced walls. Increases worker details
Stone Anchors
For more than 75 years, Hohmann & Barnard, Inc. has specialized in the design and manufacture of stone anchoring systems. In addition to designing details
Stone Anchors (2-SEAL™)
H&B is now offering stone anchor systems that incorporate the popular 2-SEAL™ and 2-SEAL™ THERMAL WING NUT anchors. Click on anchor details
    Stretch-X-Seal™ Detail Tape
    Stretch-X-Seal™ is a flexible, "stretchable", and tear resistant flashing detail tape that allows for easy installation in awkward details
    Stretch-X-Seal™ Window Flashing
    Stretch-X-Seal™ is a “stretchable” flashing tape for Window Sills and Difficult Shapes often found in residential construction projects. Made details
      T1 - Termination Bar
      T1 - Termination Bar is used at top of flashing to secure it to backup and is compatible with all H&B membrane and copper-laminate flashings. details
      T2 - Aluminum Termination Bar
      T2 - Aluminum Termination Bar, which has a 1/4” flange on top for easy caulking, is used at the top of flashing to secure it to backup. Compatible details
      T2 - Termination Bar
      T2 - Termination Bar, which has a 3/8” flange on top for easy caulking, is used at top of flashing to secure it to backup. Compatible with all H&B details
      TBS-Thermal Brick System
      REDUCE THERMAL TRANSFER! The TBS Thermal Brick Support from HOHMANN & BARNARD is a groundbreaking brick veneer support system that reduces details
      TEXTROFLASH™ Residential Flashing
      H&B's Textroflash™ Flashing is a thru-wall flashing/surface-mounted flashing is an excellent choice for your next residential project. details
        TeXtroflash™ Flashing
        H&B's Textroflash™ Flashing a thru-wall flashing/surface-mounted flashing is a 40-mil thick composite membrane with a new, proprietary adhesive details
        Thermal 2-Seal™ Tie
        The THERMAL 2-SEAL™ TIE is an innovative single screw veneer tie for metal stud construction Fabricated from stainless steel and COATED with a details
        Thermal Concrete 2-Seal™ Tie
        The THERMAL CONCRETE 2-SEAL™ TIE features a #14 screw with special alternating threads for use with concrete, CMU, wood stud, or brick backup. details
        Tie-2R Anchor System
        Designed for rubble stone walls with masonry backup, and provides anchors where they are needed. The wall reinforcement has a projecting third rod. details
        Tie-HVR-190V Anchor System
        Designed for a filled cavity condition. The backup is reinforced with a truss type reinforcement The mason places the vertical rod into the collar details
        Tie-HVR-195V Anchor System - Truss Type
        Truss Type adjustable rubble (or ashlar) stone anchor system for cavity or insulated walls. In this anchor system, the backup is reinforced with a details
        Tie-HVR-195VB Anchor System for Rubble Stone
        Adjustable Anchor System for Rubble (Ashlar) Stone designed for concrete or metal stud backup walls. In this anchor system, the L-shaped bracket is details
        Tie-HVR-295V Anchor System - Ladder Type
        Ladder Type rubble (or ashlar) stone anchoring system for cavity or insulated walls. In the Tie-HVR-295V, the backup is reinforced with a ladder type details
        Top-Seal Tape™ Over-Flange Tape
        Top-Seal Tape™ is a self-sealing, adhesive-backed over-flange tape. Self-seals around fasteners Adhesive-backed with removable release paper details
        Torq-Lok® 500 Series Anchor
        The 500 Series Anchor, for solid backup, features 360 Brass expanders with a Type 304 St/Steel shaft and 300 St/Steel hardware TECH DATA: Hole in details
        Torq-Lok® 510 Series Anchor
        The Torq-Lok® 510 Series Anchor for hollow backup, features 360 Brass expanders with a Type 304 St/Steel shaft and 300 St/Steel hardware. TECH details
        Torq-Lok® 520 Series Anchor
        The Torq-Lok® 520 Series Anchor for stud backup, features 360 Brass expanders with Type 304 St/Steel shaft and 300 St/Steel hardware TECH DATA: details
        Torq-Lok® 530 Series Anchor
        The Torq-Lok® 530 Series Anchor for stud backup, features 360 Brass expanders with Type 304 St/Steel shaft and 300 St/Steel hardware TECH DATA: details
        VBT - Vee Byna-Tie
        Vee Byna-Tie (VBT) is for use with X-SEAL or DW-10 series veneer anchors; also for use with #359 Weld-on Ties. AVAILABLE FINISHES: Hot Dip Galvanized details
        VS Series - PVC Control Joint
        VS Series - PVC Control Joint, is a complete line of polyvinyl chloride control joints suitable for various wall conditions. The PVC material details
        X-Barrier™ Peel & Stick Barrier
        X-Barrier™ is a sheet applied self-adhesive, membrane to provide an air and water barrier when applied to above grade wall assemblies. details
        X-SEAL® Anchor
        The X-SEAL® Anchor meets or exceeds requirements of the Commonwealth of Massachusetts State Building Code for air leakage and water penetration details
        X-SEAL® Byna-Lok®
        The Byna-Lok Tie is added to the X-Seal Veneer Anchor System to create the X-SEAL™/Byna-Lok® System The Byna-Lok® Wire Tie accepts details
        X-Seal® Membrane
        X-Seal® Membrane is a self-Sealing, self-adhering detail tape designed to work in conjunction with ENVIRO-BARRIER™ system. X-Seal® details
        X-SEAL® Tape
        X-SEAL® TAPE is adhesive-backed and is applied to the substrate behind the X-SEAL® Anchor for additional protection against air and moisture details
        X-SEAL® Window Tape
        H&B’s X-SEAL® Tape is ideally suited for use as an over-flange tape or window flashing. It is a self-sealing tape with adhesive-backing (with details

          Narrow Your Results

          By Category:


          By CONSTRUCTION CONDITIONS:


          By BACKUP TYPE/CONDITIONS:


          By AVAILABLE FINISHES:


          By JOINT REINFORCEMENT TYPE:


          By JOINT REINFORCEMENT FEATURE:


          By WIRE SIZE:


          By ANCHOR TYPE:


          By ANCHOR FEATURES:


          By AIR BARRIER TYPE:


          By AIR BARRIER FEATURE:


          By DIMENSIONS/GAUGES:


          By FLASHING/DETAIL TAPE FEATURES:


          By COLUMN/BEAM ANCHOR POSITION:


          By COLUMN/BEAM ANCHOR FEATURES:


          By COLUMN TIE WIRE DIAM: