Downloads - CAD


353 - Column Anchor
The 353 - Column Anchor is for anchoring block or brick to structural columns when masonry is perpendicular to the column flange DIMENSIONS/GAUGES: details

Login/Register for CAD files.

353L - Column Anchor
The 353L - Column Anchor anchors masonry to the building frame while restraining both positive and negative wind load actions, it has a slotted hole details

Login/Register for CAD files.

354 - Notched Column Anchor (Corrugated Type)
The 354 - Notched Column Anchor (Corrugated Type) is for anchoring masonry to structural columns when masonry is parallel to the column flange details

Login/Register for CAD files.

355 Column Anchor
The 355 Column Anchor is for anchoring masonry to structural columns when masonry is parallel to the column flange DIMENSIONS/GAUGES: 1/4" thick x 1 details

Login/Register for CAD files.

355L - Column Anchor
The 355L - Column Anchor anchors masonry to the building frame while restraining both positive and negative wind load actions, it has a slotted hole details

Login/Register for CAD files.

356 Column Anchor
The 356 Column Anchor is for anchoring masonry to structural column when masonry is parallel to column web The 356L has a slotted hole to accept details

Login/Register for CAD files.

356L Column Anchor
The 356L Column Anchor is for anchoring masonry to structural columns when masonry is parallel to the column web The 356L has a slotted hole to details

CAD files are not available for this product.

357 - Beam Anchor
The 357 - Beam Anchor is for anchoring masonry to structural beams DIMENSIONS/GAUGES: Standard size is 1 1/4" wide x 12 ga. thick x 12" long details

Login/Register for CAD files.

359 - Weld-on Ties
359 Weld-on Ties are used in conjunction with the Vee-Byna Tie® or the 301W Column Web Tie The systems anchor masonry to the structural frame, details

Login/Register for CAD files.

359-C - Weld-on Ties
359-C - Weld-on Ties are used in conjunction with the Vee-Byna Tie® or the 301W Column Web Tie The systems anchor masonry to the structural details

Login/Register for CAD files.

359-FH - Weld-on Ties
359-FH - Weld-on Ties are used in conjunction with the Vee-Byna Tie® or the 302W Column Web Tie The systems anchor masonry to the structural details

Login/Register for CAD files.

359FP - Weld-On Ties
359FP - Weld-On Ties are for use when there is a requirement for spray-on fireproofing Exaggerated offset dimension 'L' (specify when ordering) details

Login/Register for CAD files.

359FP-C - Weld-on Ties
359FP-C - Weld-on Ties are for use when there is a requirement for spray-on fireproofing Exaggerated offset dimension 'L' (specify when ordering) details

Login/Register for CAD files.

360 Gripstay™ Channel Slot
The 360 Gripstay™ Channel Slot is welded onto steel web or flange and accepts any type of Gripstay Anchor DIMENSIONS/GAUGES: 7-1/2" long details

Login/Register for CAD files.

361 - Gripstay™ Channel Slot
The 361 - Gripstay™ Channel Slot is furnished with welded straps on top and bottom for embedment into a CMU backup. Accepts any Gripstay™ details

Login/Register for CAD files.

362 - Gripstay™ Channel Slot
The 362 - Gripstay™ Channel Slot is furnished with integrally formed end tabs for attachment to masonry. Accepts any Gripstay™ Anchor for details

Login/Register for CAD files.

362-C - Gripstay™ Channel Slot
The 362-C - Gripstay™ Channel Slot is a continuous Gripstay™ channel and accepts any Gripstay™ Anchor for masonry or stone details

Login/Register for CAD files.

362-CX - Gripstay™ Channel Slot
The 362-CX Gripstay™ Channel is for use on backup block with insulation. Factory-welded prongs bridge the insulation and abut the concrete details

Login/Register for CAD files.

363 - Flexible Gripstay™ Channel Slot Anchor Head
The 363 - Flexible Gripstay™ Channel Anchor Head permits horizontal and vertical movement of the masonry wall while restraining the wall from details

Login/Register for CAD files.

363-BL - Byna-Lok™ Flexible Gripstay™ Channel Slot Anchor
The 363-BL is comprised of a Byna-Lok™ Wire Tie fitted with a 363 Gripstay™ head to fit any style Gripstay™ Channel Slot. The details

Login/Register for CAD files.

363-BT - Flexible Gripstay™ Channel Slot Anchor
The 363-BT is comprised of a Vee Byna- Tie® fitted with a Gripstay head to fit any style Gripstay Channel. (360, 361, 362, 362-C, 362-CX) 363-BT details

Login/Register for CAD files.

364 SV - Seismic-Notch Gripstay™ Channel Slot Anchor
364 SV - Seismic-Notch Gripstay™ Channel Slot Anchor is modified to comply with seismic codes, which call for continuous wire in the veneer to details

Login/Register for CAD files.

365 - Bent Gripstay™ Channel Slot Anchor
The 365 Bent Gripstay™ Channel Slot anchor ties masonry to steel columns, concrete or existing walls The 365 has standard 1" bend. Longer details

Login/Register for CAD files.

Adjustable Wall Ties (Pintles & Eyes)
STANDARD SIZES: Pintle Section TIE NO. SIZE 300H 3” 400H 4” 475H 4-3/4” 525H 5-1/4” Eye Section TIE NO. details

CAD files are not available for this product.

AIR-TITE Foundation Membrane
AIR-TITE Residential Below Grade Foundation Membrane AIR-TITE is a 60 mil membrane that is composed of a highly adhesive rubberized asphalt compound details

CAD files are not available for this product.

AIR-TITE Trowel-On Membrane
AIR-TITE Trowel-On Residential Below Grade Trowel-On Foundation Membrane A cut-back asphalt, containing long-fibered material, manufactured in proper details

CAD files are not available for this product.

Askew Head Bolt
The beveled head of the askew head bolt engages the internal wedge shape of H&B concrete inserts (LW-340 or HW-340) and produces an automatic details

CAD files are not available for this product.

Backer Rod - Standard
Standard Backer Rod is an ideal non-absorbent compressible backup material inserted into a joint to control sealant depth, create a backstop to allow details

CAD files are not available for this product.

BL-407 Anchor
BL-407 is a wire tie and plate combination system that provides adjustability, strength, stiffness, positive connection, corrosion resistance, and is details

Login/Register for CAD files.

BL-523 Brass Expansion Bolt
The BL-523 Brass Expansion Bolt is for fastening anchors to concrete, block, brick and into mortar joints. TECH DATA: Internal Bolt: Type 304 details

Login/Register for CAD files.

BL-5407 Masonry Fastener Assembly (Brick-Lok® System)
The BL-5407 masonry fastener assembly for masonry and concrete. Can be used for refacing a brick veneer to masonry, concrete or brick with a cavity details

CAD files are not available for this product.

Byna-Lok™ Seismic Wire Tie
New masonry veneer can be anchored to studs, existing masonry, concrete or steel with the Byna-Lok Wire Tie. Various H&B Anchor systems can be fitted details

CAD files are not available for this product.

C-Coat™ Flashing
H&B C-Coat™ Flashing is a copper thru-wall flashing with the following advantages: The flexibility and toughness of copper are combined with details

Login/Register for CAD files.

C-Fab™ Flashing
C-Fab™ Flashing is a sheet of soft-tempered copper that is permanently coated and bonded between two layers of asphalt-saturated glass fabric. details

Login/Register for CAD files.

C-Kraft™ Duplex Flashing
C-Kraft™ Duplex uses the same sheet copper as C-Fab™ Flashing, but the end product is lighter weight due to the use of kraft paper in details

Login/Register for CAD files.

Cast Aluminum Brick Vents - Style "CA"
Style "CA" brick vents features: Cast Aluminum Mill Finish* Rear waterstop Load-bearing One piece molded unit Overlapping blades Continuous details

CAD files are not available for this product.

Channel-Tee Seismic-Notch Anchor System
The Channel-Tee Seismic-Notch Anchor System is ideal for use where maximum vertical adjustability is preferred. The Continuous Channel is surface details

CAD files are not available for this product.

Concealed Lintel Systems
New! Designed and engineered concealed lintel systems for brickwork Architects can feel free to incorporate this classic look into prestigious details

This is a custom engineered product, CAD files are not available.

Continuous Wire
The use of a continuous wire in masonry veneer walls is beneficial in providing additional protection against problems arising from thermal expansion details

CAD files are not available for this product.

COPPER GUARD™
COPPER GUARD™ is a permanent premium quality rolled or sheet copper flashing for any trim work required. Excellent for forming valleys, drip details

CAD files are not available for this product.

Copper Termite Shield
H&B Copper Termite Shield is a sheet of soft-tempered copper that is permanently coated on one side with a polyethylene membrane. Compatible with details

CAD files are not available for this product.

Copper-Fabric™ NA Copper Fabric Flashing
Copper-Fabric™ NA Copper Fabric Flashing is a composite membrane consisting of a polyethylene film laminated to BOTH sides of a 3, 5, or 7 oz. details

CAD files are not available for this product.

Copper-Fabric™ SA Self-Adhering Flashing
SA Self-Adhering Copper Fabric Flashing is a composite membrane consisting of a polyethylene film laminated to a 3, 5, or 7 oz. copper sheet to details

CAD files are not available for this product.

Corners & End Dams - Copper
Hohmann & Barnard's Soldered Copper End Dams, Inside Corners and Outside Corners are for use with H&B specified flashings for protection details

CAD files are not available for this product.

Corners & End Dams - Stainless Steel
Soldered Stainless Steel End Dam, Inside Corner and Outside Corner for use with H&B specified flashings for protection against moisture details

CAD files are not available for this product.

Corrugated Control Joint Anchor
Corrugated Control Joint Anchors allow for the expansion and contraction in a masonry wall that can produce cracking

CAD files are not available for this product.

CR - Concrete Reglet
CR - Concrete Reglet, made of rigid PVC, attaches easily to form for poured concrete conditions; with a built-in face plate that keeps mortar out, details

Login/Register for CAD files.

CWT - Corrugated Wall Tie
The Corrugated Wall Tie is for anchoring wood stud to masonry. This product is only recommended for use in residential construction. GAUGES: details

Login/Register for CAD files.

Drip Plates/Edges
Drip Plates (Drip Edge) DP Our Standard Drip Plate, furnished with a smooth, factory-formed hemmed edge for installation safety and uniform details

Login/Register for CAD files.

DW-10HS® Byna-Lok® Seismic Veneer Anchor
The DW-10HS® with Byna-Lok® is a seismic veneer anchoring system comprised of the high strength brick veneer anchor, DW-10HS®, combined with the details

Login/Register for CAD files.

Narrow Your Results

By Category:


By CONSTRUCTION CONDITIONS:


By BACKUP TYPE/CONDITIONS:


By AVAILABLE FINISHES:


By JOINT REINFORCEMENT TYPE:


By JOINT REINFORCEMENT FEATURE:


By WIRE SIZE:


By ANCHOR TYPE:


By ANCHOR FEATURES:


By AIR BARRIER TYPE:


By AIR BARRIER FEATURE:


By DIMENSIONS/GAUGES:


By FLASHING/DETAIL TAPE FEATURES:


By COLUMN/BEAM ANCHOR POSITION:


By COLUMN/BEAM ANCHOR FEATURES:


By COLUMN TIE WIRE DIAM: