Advanced Search


C-Coat™ Flashing

C-Coat™ Flashing

H&B C-Coat™ Flashing is a copper thru-wall flashing with the following advantages: The flexibility and toughness of copper are combined with...
C-Fab™ Flashing

C-Fab™ Flashing

C-Fab™ Flashing is a sheet of soft-tempered copper that is permanently coated and bonded between two layers of asphalt-saturated glass fabric....
C-Kraft™ Duplex Flashing

C-Kraft™ Duplex Flashing

C-Kraft™ Duplex uses the same sheet copper as C-Fab™ Flashing, but the end product is lighter weight due to the use of kraft paper in...
Copper-Fabric™ NA Copper Fabric Flashing

Copper-Fabric™ NA Copper Fabric Flashing

Copper-Fabric™ NA Copper Fabric Flashing is a composite membrane consisting of a polyethylene film laminated to BOTH sides of a 3, 5, or 7 oz....
Copper-Fabric™ SA Self-Adhering Flashing

Copper-Fabric™ SA Self-Adhering Flashing

SA Self-Adhering Copper Fabric Flashing is a composite membrane consisting of a polyethylene film laminated to a 3, 5, or 7 oz. copper sheet to...
EPRA-MAX™ EPDM Thru-Wall Flashing

EPRA-MAX™ EPDM Thru-Wall Flashing

EPRA-MAX™ EPDM Thru-Wall Flashing remains flexible to -49° F and is not susceptible to decomposition due to UV exposure, making it an excellent...
Flex-Flash® Flashing

Flex-Flash® Flashing

H&B's Flex-Flash® is a polyester scrim reinforced 40-mil thick product formulated with Elvaloy® Kee. It does not drool and combines the...
Mastic for Asphalt Coated Flashing

Mastic for Asphalt Coated Flashing

Sandell Trowel Mastic is a cut-back asphalt, containing long-fibered material, manufactured in proper consistency for easy application. Sandell...
MFL - Metal Flashing

MFL - Metal Flashing

MFL - Metal Flashing can be formed according to job requirements. State dimensions when ordering. Comes standard with factory formed, hemmed drip...
MFL-STF - Metal Sawtooth Flashing

MFL-STF - Metal Sawtooth Flashing

Sawtooth Metal Flashing (STF) acts to bond in all directions. Can be manufactured for parapet/coping applications, or bent for relief angle...
Mighty-Flash™ SA Self-Adhering SS Fabric Flashing

Mighty-Flash™ SA Self-Adhering SS Fabric Flashing

Mighty-Flash™ SA is a self-adhering stainless steel fabric flashing product with a proprietary clear adhesive. The adhesive is...
Mighty-Flash™ Stainless Steel Fabric Flashing

Mighty-Flash™ Stainless Steel Fabric Flashing

Mighty-Flash™ is a stainless steel fabric flashing, a Class A material consisting of a layer of polymeric fabric with a single sheet of 304...
NUFLEX™ Residential PVC Flashing

NUFLEX™ Residential PVC Flashing

Nuflex Flashing is intended for use as a concealed waterproofing membrane on foundation walls and under concrete slabs. Material will not be...
Primer-SA Water-Based Primer for Self-Adhering Flashing

Primer-SA Water-Based Primer for Self-Adhering Flashing

Hohmann & Barnard’s Primer-SA is a water based, modified polymer primer that can be used in a variety of self adhering flashing applications....
Stretch-X-Seal™ Window Flashing

Stretch-X-Seal™ Window Flashing

Stretch-X-Seal™ is a “stretchable” flashing tape for Window Sills and Difficult Shapes often found in residential construction projects. Made...
TEXTROFLASH™ Residential Flashing

TEXTROFLASH™ Residential Flashing

H&B's Textroflash™ Flashing is a thru-wall flashing/surface-mounted flashing is an excellent choice for your next residential project....
TeXtroflash™ Flashing

TeXtroflash™ Flashing

H&B's Textroflash™ Flashing a thru-wall flashing/surface-mounted flashing is a 40-mil thick composite membrane with a new, proprietary adhesive...
COPPER GUARD™

COPPER GUARD™

COPPER GUARD™ is a permanent premium quality rolled or sheet copper flashing for any trim work required. Excellent for forming valleys, drip...
Corners & End Dams - Copper

Corners & End Dams - Copper

Hohmann & Barnard's Soldered Copper End Dams, Inside Corners and Outside Corners are for use with H&B specified flashings for protection...
Corners & End Dams - Stainless Steel

Corners & End Dams - Stainless Steel

Soldered Stainless Steel End Dam, Inside Corner and Outside Corner for use with H&B specified flashings for protection against moisture...
CR - Concrete Reglet

CR - Concrete Reglet

CR - Concrete Reglet, made of rigid PVC, attaches easily to form for poured concrete conditions; with a built-in face plate that keeps mortar out,...
Drip Plates/Edges

Drip Plates/Edges

Drip Plates (Drip Edge) DP Our Standard Drip Plate, furnished with a smooth, factory-formed hemmed edge for installation safety and uniform...
FLASH-GUARD™ NA Residential

FLASH-GUARD™ NA Residential

FLASH-GUARD™ NA Copper Fabric Flashing is an excellent choice for flashing pressure-treated and composite decks. Can also be used for:...
FLASH-GUARD™ SA Residential

FLASH-GUARD™ SA Residential

FLASH-GUARD™ SA Self-Adhering Copper Fabric Flashing is an excellent choice for flashing pressure-treated and composite decks. Can also be used...
Flex-Flash® Drip Edge

Flex-Flash® Drip Edge

H&B’s Flex-Flash® Drip Edge is a 3" wide by 45-mil thick product formulated with Elvaloy® Kee*. Available in colors to match mortar and /...
HB Sealant

HB Sealant

HB SEALANT is a multi-purpose, resilient joint sealant that combines economy and high performance. It is ideal for a wide range of applications where...
Liquid-Flash™

Liquid-Flash™

Liquid-Flash is formulated using a high performance silyl-terminated polyether polymer technology (STPE). It is a single component, moisture cure...
Mighty-Flash™ NA Residential

Mighty-Flash™ NA Residential

Mighty-Flash™ NA is an excellent for flashing pressure-treated and composite decks. Mighty-Flash™ NA, a stainless steel fabric flashing,...
Mighty-Flash™ SA Residential

Mighty-Flash™ SA Residential

Mighty-Flash™ SA is an excellent for flashing pressure-treated and composite decks. A self-adhering stainless steel fabric flashing product...
Mite-Out™ Copper Termite Shield

Mite-Out™ Copper Termite Shield

Mite-Out™ Copper Termite Shield with Sill-Seal is a sheet of soft-tempered copper that is permanently coated on one side with a polyethylene...
Mortar Trap™ Weep Vents

Mortar Trap™ Weep Vents

A 100% recycled polyester plastic non-woven mesh vent which is treated with a flame retardant and ultra-violet inhibitors. Used in vertical joints...
MR - Masonry Reglet

MR - Masonry Reglet

The MR - Masonry Reglet, made of rigid PVC, is embedded into the mortar joint of masonry backup to accept flashing. Built-in face plate keeps mortar...
Stretch-X-Seal™ Detail Tape

Stretch-X-Seal™ Detail Tape

Stretch-X-Seal™ is a flexible, "stretchable", and tear resistant flashing detail tape that allows for easy installation in awkward...
T1 - Termination Bar

T1 - Termination Bar

T1 - Termination Bar is used at top of flashing to secure it to backup and is compatible with all H&B membrane and copper-laminate flashings....
T2 - Aluminum Termination Bar

T2 - Aluminum Termination Bar

T2 - Aluminum Termination Bar, which has a 1/4” flange on top for easy caulking, is used at the top of flashing to secure it to backup. Compatible...
T2 - Termination Bar

T2 - Termination Bar

T2 - Termination Bar, which has a 3/8” flange on top for easy caulking, is used at top of flashing to secure it to backup. Compatible with all H&B...
X-SEAL® Window Tape

X-SEAL® Window Tape

H&B’s X-SEAL® Tape is ideally suited for use as an over-flange tape or window flashing. It is a self-sealing tape with adhesive-backing (with...